DATOU BOSS 적외선 페인트 경화 Lamp DT-SC-003 User Manual

1. 서론

This manual provides essential information for the safe and effective operation of your DATOU BOSS Infrared Paint Curing Lamp, Model DT-SC-003. This device is designed for professional use in automotive body repair, paint curing systems, and other applications requiring efficient paint drying.

난amp utilizes shortwave infrared heating technology, which offers high luminous efficiency and strong penetrating power. This allows for drying from the inside out, resulting in a high surface gloss and strong coating adhesion, while reducing the risk of wrinkles and tears in the paint finish.

Figure 1: Wide range of applications for the DATOU BOSS Infrared Paint Curing Lamp.

2. 안전 지침

Read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• 전기 안전: 전원 공급 장치가 l과 일치하는지 확인하십시오.amp의 권tage (110V). Do not operate the lamp with a damaged cord or plug. Keep the power cord away from heat, oil, sharp edges, or moving parts.
• 열 위험: 난amp generates intense heat. Caution: Product may overheat if used for extended periods. Ensure to allow proper heat dissipation. l을 만지지 마세요amp housing or bulbs during operation or immediately after use. Allow sufficient time for cooling.
• 화상 예방: Minors are not allowed to touch to prevent burns. Always wear appropriate personal protective equipment, including heat-resistant gloves and eye protection.
• 인화성 물질: l을 사용하지 마십시오amp near flammable liquids, gases, or materials. Ensure adequate ventilation in the work area.
• 위치: Position the infrared paint curing lamp at a safe distance from the painted surface to prevent damage to the paint or the surface itself. Avoid direct contact with the surface being cured.
• 저장: l을 끄고 플러그를 뽑으십시오.amp when not in use. Store the lamp in a dry, safe place, out of reach of children.
• 유지: l을 수정하거나 수리하려고 시도하지 마십시오.amp 당신 자신. 모든 서비스는 자격을 갖춘 직원에게 맡기십시오.

3. 제품 특징

The DATOU BOSS DT-SC-003 Infrared Paint Curing Lamp is engineered with several key features for optimal performance:

• Shortwave Infrared Heating: High luminous efficiency and strong penetrating power for efficient, inside-out drying.
• 반사경 디자인: Interior features a specially designed reflector for uniform heat distribution and increased curing area, shortening curing time.
• High Heat Dissipation: Constructed from aluminum alloy with an aluminum alloy mesh front and perforated aluminum alloy sheet back, enhancing heat dissipation and extending service life.
• 간편한 조작: Equipped with a rotating lamp housing and a stable adjustable metal tube construction. Features ball bearing rollers with a parking brake for convenient and safe positioning.
• 스마트 타이머 기능: Integrated 0-90 minutes intelligent timing function for precise control and automatic shutdown.

Figure 2: Shortwave infrared baking principle and drying time comparison.

Figure 3: Detail of cooling holes for enhanced heat dissipation.

4. 구성 요소 이상view

Familiarize yourself with the main components of your infrared paint curing lamp:

Figure 4: Key components of the DATOU BOSS Infrared Paint Curing Lamp.

• 알루미늄 쉘: Provides durability and contributes to heat dissipation.
• 통풍구 : Located on the back for airflow and cooling.
• 구리선: High-quality power cable for reliable electrical connection.
• Infrared Shortwave Tube: The primary heating element.
• Bright Chrome Grid: Protective cover for the infrared tubes, resistant to rust.
• Configurable Lifter: For adjusting the lamp의 위치입니다.
• Intelligent Timing Function Knob: Allows setting the curing time from 0 to 90 minutes.
• Detachable Handheld Handle: For portable use and easy positioning.

5. 설정 가이드

Follow these steps to set up your infrared paint curing lamp:

1. 풀다: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 손상 여부를 확인하세요.
2. Assemble Handle (if detached): Attach the detachable handheld handle to the lamp housing if it is not already installed. Ensure it is securely fastened.
3. 위치: l을 놓으세요amp on a stable, level surface or mount it using appropriate equipment. The lamp features ball bearing rollers with a parking brake for stability.
4. 각도 조정: Use the configurable lifter and rotating lamp housing to adjust the angle and height of the lamp to direct heat towards the desired area.
5. 전원 연결: l을 확인하세요amp is switched off. Plug the power cord into a grounded 110V electrical outlet.

6. 사용 설명서

Operating the DATOU BOSS Infrared Paint Curing Lamp 몇 가지 간단한 단계를 거칩니다.

1. 표면 준비: Ensure the area to be painted is clean and free of debris. Apply paint to the surface according to manufacturer guidelines.
2. 위치 Lamp: Position the infrared paint curing lamp at a safe and effective distance from the painted surface. Refer to paint manufacturer recommendations for optimal curing distance and time.
3. 타이머 설정 : Turn the intelligent timing function knob to set the desired curing time (0-90 minutes). The lamp will automatically turn on once the timer is set.


Figure 5: Timer knob for setting curing duration.

4. 경화 과정 모니터링: Allow the paint to dry according to the recommended time. The lamp will emit a bright red light during operation.


그림 6: Lamp in operation, emitting infrared light.

5. 자동 종료: 난amp will automatically shut down once the set time has elapsed.
6. 쿨다운: 사용 후 l 허용amp to cool down completely before handling or storing.

7. 유지관리

Regular maintenance ensures the longevity and optimal performance of your curing lamp:

• 청소: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe down the exterior of the lamp. 연마성 세척제나 용제를 사용하지 마십시오.
• 전구 교체: If an infrared tube fails, replace it with an identical shortwave infrared tube. Ensure the lamp is unplugged and cool before attempting replacement.
• 점검: Periodically inspect the power cord for any signs of damage. Check all connections and fasteners for tightness.
• 저장: L을 저장amp 사용하지 않을 때는 깨끗하고 건조한 환경에서 보관하십시오.

8. 문제 해결

If you encounter issues with your DATOU BOSS Infrared Paint Curing Lamp, 다음의 일반적인 문제와 해결책을 참조하세요.

• Lamp 켜지지 않습니다:
  • 전원 코드가 작동하는 콘센트에 단단히 꽂혀 있는지 확인하세요.
  • Ensure the timer knob is set to a duration greater than zero.
  • Verify that the power outlet is functional by testing with another device.
• Insufficient curing:
  • l을 조정하세요amp closer to the painted surface (while maintaining a safe distance).
  • Increase the curing time setting.
  • Ensure the work area temperature is not excessively low.
  • Check if all infrared tubes are functioning correctly. Replace any burnt-out tubes.
• Lamp overheats:
  • l 주위에 적절한 환기가 이루어지도록 하십시오.amp.
  • Do not operate for excessively long periods without allowing cool-down intervals.
  • Check that the cooling vents are not obstructed.

문제가 지속되면 고객 지원에 문의하여 도움을 받으십시오.

9. 사양

Technical specifications for the DATOU BOSS Infrared Paint Curing Lamp DT-SC-003:

그림 7: 제품 치수 및 주요 사양.

10. 보증 및 지원

For warranty information, technical support, or service inquiries, please contact DATOU BOSS customer service through your original point of purchase or visit the official DATOU BOSS website. Please have your model number (DT-SC-003) and purchase date available when contacting support.