1. 서론
This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.
설치하기 전에 이 설명서를 자세히 읽고 나중에 참고할 수 있도록 보관하세요.
2. 안전 지침
- 전기 안전: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
- 용도: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
- IP44 등급: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
- 빛의 출처: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
- 손질: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
- 청소: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 1 x LEDVANCE Linear LED Shelf Light (400mm)
- Complete mounting accessories (screws, wall plugs)
- 연결 액세서리
4. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | 4058075575738 |
| 치수(길이 x 너비 x 높이) | 40cm x 13cm x 3cm |
| 무게 | 760그램 |
| 전력 소비 | 6.5 와트 |
| 광속 | 700루멘 |
| 색온도 | 3000 켈빈(웜화이트) |
| 권tage | 240볼트(AC) |
| IP 등급 | IP44(방말) |
| 재료 | 플라스틱, 알루미늄 |
| 특징 | Integrated PIR Motion Detector, Daylight Sensor |
| 수명 | 최대 30,000시간 |
| 에너지 효율 등급 | E |
참고 : 사양은 예고없이 변경 될 수 있습니다.
5. 설정 및 설치
The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:
- 설치 영역 준비: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
- 전원 분리: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
- 드릴링 지점 표시: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.
- 드릴 구멍: 표시된 지점에 벽 재질에 맞는 드릴 비트를 사용하여 구멍을 뚫으세요. 제공된 벽 플러그를 뚫은 구멍에 삽입하세요.
- 장착 브래킷 부착: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
- 전기 연결: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
- 고정장치 장착: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
- 복원력 : 조명기구를 단단히 고정하고 배선을 완료한 후에는 주 회로 차단기에서 전원을 다시 켜십시오.
6. 사용 설명서
This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.
- 자동 작동: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
- 자동 차단 : The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
- 센서 배치: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.
7. 유지관리
The LEDVANCE Linear LED Shelf Light requires minimal maintenance.
- 청소: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp 천을 사용하십시오. 독한 화학 약품, 연마성 세척제 또는 스프레이를 조명 기구에 직접 사용하지 마십시오.
- 점검: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
- 빛의 출처: LED 광원은 일체형으로 사용자가 교체할 수 없습니다. 광원이 고장 나면 조명기구 전체를 교체해야 합니다.
8. 문제 해결
If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:
- 불이 켜지지 않습니다:
- 전원 공급 장치가 연결되어 있는지, 회로 차단기가 켜져 있는지 확인하십시오.
- 배선 연결이 안전한지 확인하세요.
- Verify that the ambient light is low enough for the daylight sensor to activate the light.
- Check if motion is being detected by the PIR sensor.
- 조명이 계속 켜져 있습니다:
- 센서 감지 범위 내에 지속적인 움직임이 없는지 확인하십시오.
- Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
- Light Flashes or Flickers:
- Disconnect power and check all electrical connections for looseness or damage.
- 볼륨을 확보하세요tage supply is stable and within the specified range (240V).
이러한 조치를 취해도 문제가 해결되지 않으면 고객 지원팀에 문의하십시오.
9. 보증 및 지원
This LEDVANCE Linear LED Shelf Light comes with a 2년 보증 구매일로부터 정상적인 사용 중에 발생한 재료 및 제조상의 결함을 보장합니다.
For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official web제품을 구매하신 사이트 또는 판매점에 연락해 주십시오. 구매 증빙 자료와 제품 모델 번호를 준비해 주시기 바랍니다.