소개
The Nuoenx Solar Wireless Backup Camera System provides a convenient and reliable solution for enhancing rear visibility in various vehicles. This system features a 7-inch high-resolution monitor and a solar-powered wireless camera, designed for quick and easy installation without the need for complex wiring. Its robust design ensures performance in diverse weather conditions, making reversing and parking safer and more efficient.
패키지 내용
- 7인치 HD 모니터
- Solar Wireless Backup Camera (with integrated license plate bracket)
- USB Charging Cable (for camera)
- 12V Car Charger (for monitor)
- Suction Cup Mount (for monitor)
- Hex Key and Screws (for camera adjustment)
- Double-sided Adhesive Pad (for monitor mount)
- 사용자 설명서
설정 및 설치
카메라 설치
The solar wireless backup camera is designed for a quick, no-wire installation, typically completed in under 3 minutes. No drilling or complex wiring is required.
- Remove your vehicle's license plate.
- Position the solar wireless backup camera's integrated bracket behind your license plate, aligning the screw holes.
- Re-attach your license plate using the original screws, securing both the license plate and the camera bracket to your vehicle.
- Adjust the camera lens angle as needed. The camera pivots to allow for optimal view주고받음.
- It is recommended to fully charge the camera via the Type-C port before first use, especially if solar exposure is limited initially.
Image: Step-by-step guide for camera installation on a license plate.
이미지: 상세 view of the camera bracket adapter, allowing for vertical adjustment to fit various license plates.
모니터 설치
- Attach the suction cup mount to the monitor.
- Clean the desired area on your dashboard or windshield.
- Press the suction cup firmly onto the surface and engage the lever to secure it. An adhesive pad is provided for dashboard mounting if the suction cup alone is insufficient.
- 최적의 각도로 모니터 각도를 조정하세요. view주고받음.
- Plug the 12V car charger into your vehicle's cigarette lighter socket.
- Connect the power cable from the 12V charger to the monitor.
Image: The 7-inch HD monitor displaying a clear rear view, mounted on the dashboard with a suction cup.
편성
The camera and monitor are pre-paired from the factory. They should automatically connect when both are powered on. If pairing is lost, refer to the troubleshooting section or the user manual for re-pairing instructions.
Video: Installation guide for a truly wireless backup camera system, demonstrating the setup process.
작동 지침
모니터 컨트롤
The monitor features side buttons for easy navigation and adjustment of settings:
- 메뉴 버튼: 설정을 위해 메인 메뉴에 접근하세요.
- 위/아래 화살표: 메뉴 옵션을 탐색하거나 값(예: 밝기, 대비)을 조정하세요.
- 밝기/대비: Adjust the display's brightness and contrast levels for optimal visibility.
- Mirror/Flip Image: 카메라 변경 view to mirror or normal, and flip the image vertically if needed (e.g., for upside-down mounting).
- 반전 시간: Set the duration the monitor stays on after the camera is activated (e.g., 30s, 60s, 90s, 120s).
- Guideline On/Off: Toggle parking guidelines on or off.
카메라 활성화
The camera automatically turns on when the monitor is powered on and turns off when the monitor is switched off. This eliminates the need for manual camera activation.
Video: Short demonstration of the camera's night vision capabilities, showing clear visibility in low-light conditions.
충전 중
태양열 충전
The camera features an expanded solar charging panel with a fixed 30° upward elevation angle. This design maximizes exposure to sunlight, ensuring efficient energy storage. In sunny weather, the camera will be continuously charged, reducing the need for manual charging and promoting eco-friendliness.
USB 충전
The camera has a built-in 6700 mAh rechargeable battery and supports Type-C USB charging. This allows for fast charging when sunlight is unavailable or for initial full charging before installation. A USB charging cable is included.
Image: Illustration of the two charging methods: solar charging via the integrated panel and USB charging via the Type-C port.
방수 표준
The wireless license plate camera is rated IP69K waterproof, ensuring reliable operation in extreme weather conditions, including heavy rain, snow, and dust. It is designed to withstand temperatures from -4°F to +158°F (-20°C to +70°C), preventing lens water or fog issues.
Image: The IP69K waterproof camera is shown mounted on a license plate, highlighting its durability against water, snow, and dust.
차량 호환성
This backup camera system is suitable for a wide range of vehicles, including cars, RVs, semi-trailers, trucks, pickups, campers, vans, 5th wheels, and motorhomes. The wireless signal can reach up to 36 feet on vehicles for continuous use.
Image: Visual representation of different vehicle types compatible with the backup camera system.
명세서
- 모니터 화면 크기: 7 인치
- 디스플레이 기술: 액정표시장치
- 기타 디스플레이 기능: 무선 전화
- Camera Optical Sensor Technology: CMOS
- Camera Lens Type: 결정된
- Camera Real Angle of View: 170도
- 배터리: 6700 mAh Lithium Ion (2 required)
- 권tage: 9V-35V (compatible with monitor)
- 설치 유형: 대시보드 장착, 표면 장착
- 커넥터 유형: 무선 전화
- 제품 치수(모니터): 가로 7.87인치, 세로 4.72인치
- Product Dimensions (Camera with frame): 가로 8.26인치, 세로 7.09인치
- Product Dimensions (Solar Panel): 가로 7.08인치, 세로 1.38인치
- 품목 무게: 2.68파운드
보증 및 지원
Nuoenx is committed to providing high-quality products and customer satisfaction. For any questions, technical support, or warranty claims, please contact customer service. Refer to the included user manual for contact details.