GODOX V860III-S Sony Camera Flash Instruction Manual

소개

This manual provides detailed instructions for the safe and effective use of your GODOX V860III-S camera flash. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage to the product or injury to yourself.

The GODOX V860III-S is a high-performance camera flash designed for Sony cameras, featuring advanced functions such as TTL auto flash, High-Speed Sync (HSS) up to 1/8000s, and a built-in 2.4G wireless X system. Its powerful lithium-ion battery ensures fast recycle times and extended shooting sessions.

안전 정보

Always observe basic safety precautions when using this product. Failure to do so may result in electric shock, fire, or injury.

플래시 장치를 분해하거나 개조하지 마십시오.
제품을 건조한 곳에 보관하십시오. 비나 습기에 노출시키지 마십시오.
플래시를 터뜨린 후에는 플래시 튜브가 뜨거울 수 있으므로 만지지 마십시오.
어린이의 손이 닿지 않는 곳에 보관하세요.
지정된 배터리와 충전기만 사용하십시오.
Avoid direct eye exposure to the flash, especially at close range.

제품 끝view

The GODOX V860III-S is an advanced speedlight with a robust design and intuitive controls.

주요 특징:

플래시 모드 : Supports TTL auto flash, Manual flash, Multi-flash, Flash Exposure Compensation (FEC), Flash Exposure Lock (FEL), Front Curtain Sync, Rear Curtain Sync, and High-Speed Sync (HSS) up to 1/8000s.
무선 시스템: Integrated 2.4G wireless X system with a control range of up to 100 meters.
줌 범위: Automatic or manual zoom flash head from 20mm to 200mm for uniform illumination.
배터리 성능: High-capacity 7.2V / 2600mAh lithium-ion battery provides approximately 1.5-second recycle time and up to 450 full-power flashes. The battery is interchangeable with the Godox V1 series.
모델링 엘amp: Built-in modeling lamp with 10 adjustable brightness levels for pre-visualization of lighting effects.
Quick Release Hot Shoe: Upgraded quick-install hot shoe for fast and secure mounting/dismounting.
단축 키: Dedicated TTL/M shortcut button for quick switching between automatic and manual flash modes.
유연한 머리 회전: Flash head rotates horizontally 0-330° and vertically -7°-120° for versatile bounce and off-camera lighting.

구성 요소:

Familiarize yourself with the main parts of your GODOX V860III-S flash unit.

GODOX V860III-S front view with flash head and modeling lamp — 그림 1: 전면 view of the GODOX V860III-S flash unit, showing the main flash head and the integrated modeling lamp.

GODOX V860III-S with wide panel and bounce card extended — Figure 2: GODOX V860III-S with the built-in wide panel and bounce card extended from the flash head.

GODOX V860III-S side view showing battery compartment and controls — 그림 3: 측면 view of the GODOX V860III-S, highlighting the battery compartment and control buttons.

GODOX V860III-S mounted on a camera hot shoe, showing the LCD display and control panel — 그림 4: 상단 view of the GODOX V860III-S mounted on a camera, displaying the LCD screen and control buttons.

설정

1. 배터리 충전

The V860III-S uses a high-capacity lithium-ion battery. Before first use, fully charge the battery using the provided power adapter.

배터리를 충전기에 삽입하세요.
충전기를 전원 콘센트에 연결하세요.
충전기의 표시등은 충전 상태를 보여줍니다(예: 빨간색은 충전 중, 녹색은 완충).

Image showing the GODOX V860III-S battery and charger, highlighting battery performance — Figure 5: The V860III-S uses a high-performance lithium-ion battery, offering fast recycle times and numerous flashes per charge.

2. 배터리 설치

플래시 본체 측면에 있는 배터리함 덮개를 여세요.
Insert the charged lithium-ion battery, ensuring correct polarity.
배터리 덮개를 단단히 닫으세요.

3. 카메라에 플래시 장착하기

The V860III-S features a quick-release hot shoe for easy attachment.

Slide the flash unit onto your camera's hot shoe.
Push the quick-release lock lever to secure the flash in place.
To remove, push the quick-release lock lever and slide the flash off.

작동 지침

1. 전원 켜기/끄기

To power on the flash, slide the ON/OFF switch to the "ON" position. To power off, slide it to "OFF".

2. 플래시 모드

The V860III-S supports various flash modes. Use the 방법 button to cycle through them or the dedicated 티틀/엠 단축키.

Close-up of the GODOX V860III-S control panel showing the TTL/M shortcut button — Figure 6: The dedicated TTL/M shortcut button allows for quick switching between automatic and manual flash modes.

TTL 모드: 자동 플래시 노출 제어. 카메라의 측광에 따라 플래시 출력이 자동으로 조절됩니다.
수동(M) 모드: 플래시 출력 전력을 1/1에서 1/256까지 수동으로 설정할 수 있습니다.
멀티(스트로보스코픽) 모드: 단일 노출 중에 일련의 빠른 플래시를 발사하여 피사체의 다양한 움직임을 포착합니다.

3. 고속 동기화(HSS)

HSS allows you to use flash at shutter speeds faster than your camera's native flash sync speed, enabling wider apertures in bright conditions or freezing fast motion.

Activate HSS through your camera's flash settings or the flash unit's menu.
The V860III-S supports HSS up to 1/8000s.

4. 모델링 Lamp

통합 모델링 lamp helps visualize the lighting effect before taking a shot.

모델링 l을 누르십시오.amp button (usually indicated by a light bulb icon) to turn it on/off.
Rotate the select dial to adjust the brightness across 10 levels.

Images demonstrating 10-level adjustable modeling lamp brightness and flash coverage at various focal lengths (20mm-200mm) — Figure 7: The modeling lamp offers 10 brightness levels. Also shown is the flash coverage from 20mm to 200mm.

5. Wireless Operation (2.4G Wireless X System)

The V860III-S can function as a master or slave unit in the Godox 2.4G wireless X system.

Setting as Master/Slave: Access the wireless settings in the flash menu to set the unit as a master (transmitter) or slave (receiver).
Channel and Group: Ensure the master and slave units are set to the same channel and group for proper communication.
범위: The wireless system has a maximum control distance of approximately 100 meters.

Diagram illustrating Godox 2.4G wireless system compatibility with various transmitters and receiver flashes — Figure 8: The GODOX V860III-S is compatible with other Godox 2.4G wireless X system devices, functioning as both a transmitter and receiver.

6. 플래시 헤드 회전

플래시 헤드는 회전 및 기울기 조절이 가능하여 바운스 플래시나 창의적인 조명 연출에 활용할 수 있습니다.

Horizontal rotation: 0° to 330°.
Vertical tilt: -7° to 120°.

유지

청소: 플래시 유닛은 부드럽고 마른 천으로 닦으십시오. 잘 지워지지 않는 얼룩은 약간 거친 천으로 닦아내십시오.amp cloth with mild detergent, then wipe dry. Do not use organic solvents like thinner or benzene.
배터리 관리 : Store the battery in a cool, dry place when not in use. If storing for extended periods, charge the battery to about 50% every 3 months to prolong its lifespan.
저장: When not in use, store the flash unit in a protective case in a dry, dust-free environment.

문제 해결

문제	가능한 원인	해결책
플래시가 터지지 않습니다.	배터리가 부족하거나 방전되었습니다. 플래시가 제대로 장착되지 않았습니다. 플래시가 절전 모드에 있습니다. Incorrect camera/flash settings.	배터리를 충전하거나 교체하십시오. 플래시가 핫슈에 제대로 장착되고 고정되었는지 확인하십시오. 아무 버튼이나 눌러 플래시를 켜세요. Check camera and flash mode settings (e.g., TTL, M, HSS).
플래시 출력이 일관되지 않습니다.	배터리가 부족합니다. Flash head zoom setting is incorrect. Subject distance is too far.	배터리를 충전하세요. Adjust zoom to match lens focal length or set to auto. Move closer to the subject or increase flash power.
무선 트리거가 작동하지 않습니다.	채널/그룹 설정이 잘못되었습니다. 거리가 너무 멀거나 장애물이 있습니다. Master/slave mode incorrectly set.	Verify all units are on the same channel and group. 거리를 줄이거나 시야를 확보하십시오. Ensure master and slave units are set correctly.

명세서

특징	세부 사항
상표	고독스
모델	V860III-S
호환 마운트	Sony Hot Shoe Mount
플래시 유형	External Camera Flash (Speedlight)
가이드 넘버(GN)	60(m ISO100)
플래시 동기화 속도	최대 1/8000초(HSS)
무선 통신	2.4G Wireless (Built-in)
배터리	1x 7.2V / 2600mAh Lithium-Ion Battery (Included)
재활용 시간	Approx. 1.5 seconds (Full Power)
풀 파워 플래시	약. 450
줌 범위	20-200mm (자동/수동)
플래시 헤드 회전	수평: 0~330°, 수직: -7~120°
모델링 엘amp	네, 10단계로 조절 가능합니다.
포함된 구성 요소	Flash unit, Lithium-Ion Battery, Power Adapter

보증 및 지원

This GODOX product comes with a 6개월 보증 구매일로부터. 본 보증은 정상적인 사용 중 발생한 제조상의 결함 및 고장에 적용됩니다.

The warranty does not cover damage caused by misuse, unauthorized modification, accident, or natural disaster. Please retain your proof of purchase for warranty claims.

For technical support, service, or warranty claims, please contact your authorized GODOX dealer or visit the official GODOX web연락처 정보 사이트.

GODOX V860III-S

소개