Kyocera (Old Ryobi) Professional Winch AWI62 685751A - Instruction Manual

1. 제품 오버view

The Kyocera (formerly Ryobi) AWI62 685751A is a professional-grade, compact, and lightweight electric winch designed for lifting applications. It features a maximum lifting capacity of 60kg and comes equipped with a 4mm x 15m wire rope. Key safety features include a double brake system and mechanisms to prevent acceleration, twisting, and reverse winding. The integrated latch lock hook automatically secures loads once engaged.

Image: The Kyocera AWI62 electric winch shown in a typical construction setting, actively lifting materials. This illustrates its compact design and operational use.

2. 안전 정보

Always prioritize safety when operating the winch. Failure to follow safety guidelines can result in serious injury or equipment damage.

• 매뉴얼을 읽어보세요: Thoroughly read and understand all instructions before installation and operation.
• 하중 용량: Never exceed the maximum lifting capacity of 60kg. Overloading can cause structural failure.
• 안전한 설치: Ensure the winch is securely mounted to a stable structure capable of supporting the winch's weight plus the maximum load.
• 와이어 로프를 점검하십시오: Before each use, inspect the wire rope for fraying, kinks, corrosion, or other damage. Replace the wire rope if any damage is found.
• 클리어 영역: Keep the work area clear of personnel and obstructions during operation.
• 개인 보호 장비(PPE): Wear appropriate PPE, including safety helmets, gloves, and safety shoes.
• 전원: Ensure the power source matches the winch's requirements (AC100V, 50/60Hz).
• 비상 정지 : Familiarize yourself with the location and operation of the emergency stop function.

Image: This diagram highlights the integrated safety features of the winch, such as mechanisms to prevent over-winding, reverse winding, acceleration, and twisting, along with the double brake system.

3. 설정 및 설치

Proper setup is essential for safe and efficient operation.

3.1 풀기 및 검사

• 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
• Verify that all accessories are present: operation switch (with 10m cord), pre-installed 4mm x 15m wire rope, and swivel hook.
• Inspect the winch and all components for any signs of shipping damage. Do not use if damaged.

3.2 윈치 장착

The winch is designed for hanging installation. Ensure the mounting point is structurally sound and can safely support the winch and its maximum load.

• Use appropriate fasteners and mounting hardware (not included) suitable for your specific installation environment.
• Mount the winch securely, ensuring it is level and stable.

3.3 Connecting the Operation Switch

The wired operation switch connects to the winch via a 10m cord.

• Connect the operation switch cord to the designated port on the winch.
• 작동 중 연결이 실수로 끊어지는 것을 방지하기 위해 연결이 안전한지 확인하십시오.

3.4 Wireless Remote Control Pairing (If Applicable)

If your model includes a wireless remote control, follow these steps for pairing. Note: The standard model includes a wired operation switch.

4. 사용 설명서

Follow these steps for safe and effective operation of your winch.

4.1 작업 전 점검

• Confirm the winch is securely mounted.
• Inspect the wire rope and hook for any damage.
• 하중이 60kg을 초과하지 않는지 확인하십시오.
• Clear the lifting path of any obstacles or personnel.

4.2 Engaging the Latch Lock Hook

이미지: 클로즈업 view of the latch lock hook. To open the hook, press down on the lever. When a load is applied, the hook automatically closes and locks, ensuring secure attachment.

• To open the hook, press down on the lever.
• 하중을 후크에 단단히 고정하세요.
• Once a load is applied, the hook will automatically close and lock, preventing accidental detachment.

4.3 들어올리기 및 내리기

• Use the UP/DOWN buttons on the operation switch to control the lifting and lowering of the load.
• Operate smoothly, avoiding sudden movements.
• Monitor the load and wire rope throughout the operation.
• The winch operates at a lifting speed of 46cm/s.

5. 유지관리

Regular maintenance ensures the longevity and safe operation of your winch.

5.1 Wire Rope Inspection and Replacement

The wire rope is a critical component and must be inspected regularly. Replace the wire rope if it shows signs of wear, damage, or corrosion.

• Inspect the entire length of the wire rope for broken strands, kinks, crushing, birdcaging, or any significant deformation.
• Check for signs of corrosion or excessive wear.
• If more than 10% of the wire strands are broken in any section, or if the rope is significantly deformed or corroded, replacement is necessary.

5.2 일반 청소 및 윤활

• Keep the winch clean and free from dirt, debris, and moisture.
• Periodically lubricate moving parts as recommended in the full manual (if available).

6. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

6.1 Winch Not Operating

• 전원 확인: Ensure the winch is properly connected to a functioning power outlet (AC100V).
• 가동 스위치: Verify the operation switch cord is securely connected and the switch itself is not damaged.
• 과부하 보호: The winch may have an overload protection mechanism. If overloaded, allow it to cool down before attempting operation again.

6.2 Wire Rope Issues

• Tangled/Uneven Winding: Ensure the wire rope is winding evenly onto the drum. Uneven winding can cause tangles or damage.
• Damaged Rope: If the wire rope is damaged (frayed, kinked), it must be replaced immediately. Refer to the "Wire Rope Replacement" section.

여기에 언급되지 않은 문제는 고객 지원팀에 문의하세요.

7. 사양

8. 보증 및 지원

8.1 보증 정보

이 제품에는 다음이 포함되어 있습니다. 1년 보증 from the date of purchase. The warranty covers defects in materials and workmanship under normal use. Please ensure the product is used according to its intended purpose as outlined in this manual. Misuse or unauthorized modifications will void the warranty.

8.2 고객 지원

For technical assistance, parts, or warranty claims, please contact Kyocera customer support. Refer to your purchase documentation for specific contact details or visit the official Kyocera web대지.

교세라 공식 Web대지: www.kyocera.co.jp