제품 끝view
The Automatic Reclosing Power Supply Protector is designed to provide comprehensive electrical safety for industrial and home applications. It integrates multiple protection features to ensure stable and reliable operation of electrical circuits.
주요 특징
- 종합 보호: Provides overload, leakage, overvoltage, 그리고 undervoltag전자 보호.
- 자동 복구: Features automatic overvoltage recovery to restore power safely.
- 강화된 안전성: Prevents reclosing in case of fault and includes anti-magnetic interference function.
- 내구성 있는 구조: Shell and parts are made from highly flame-retardant, pressure-resistant, and impact-resistant plastic.
- Quick Circuit Opening: Ensures rapid circuit disconnection for electrical safety, maintaining contacts in fully open or closed states.
- 상태 표시기: A red control signal status light on the front indicates the current control state, especially for photovoltaic reclosing.
- Fast Closing Function: Extends product lifespan by mitigating negative effects of manual switch speed during reclosing and automatic opening.
- 간편한 설치: Designed for DIN rail type installation, making it easy to interchange.
명세서
| 매개변수 | 값 |
|---|---|
| 품목 유형 | 누설 방지 스위치 |
| Rated Current (IN) | 1A~63A (조정가능) |
| 정격 볼륨tage | 교류 220V |
| 극 수 | 1피+엔 |
| 너비 | 대략. 36mm / 1.4인치 |
| Automatic Closing Delay Time | 30S |
| Automatic Opening Delay Time | ≤4초 |
| 언더볼tage Protection Action Time | 2-5S |
| 오버볼tage Protection Action Time | 2-5S |
| 제조업체 | 01 |
| 모델 번호 | 01ok6p7d3zbm3687 |
| 패키지 크기 | 12 x 8 x 6cm |
| 품목 무게 | 213g |
| 설치 유형 | DIN 레일 |
설정 및 설치
Proper installation is crucial for the safe and effective operation of the Automatic Reclosing Power Supply Protector. This device is designed for DIN rail mounting.
배선도
Refer to the diagram below for correct wiring. Ensure all connections are secure and comply with local electrical codes.
- Ensure the main power supply is turned off before beginning installation.
- Mount the protector securely on a standard DIN rail.
- Connect the "In line" (input) to the appropriate power source terminals as shown in the diagram.
- Connect the "Out line" (output) to the circuit or device you wish to protect.
- Verify all connections are tight and correctly polarized (firing line and null line).
- Once wiring is complete, turn on the master control switch. The automatic reclosing power protector will immediately turn on the circuit.
작동 지침
The protector features a digital display and control buttons for monitoring and setting parameters.
1. Operate on the Measurement Interface
- Long Press "Set/Switch" Key for 3S: View 현재 볼륨tage (220V), current (63A), and leakage current (90mA). If no operation for 10S, it will automatically return to the voltage display interface.
- Short Press "clear/query" Button: View total fault times in turn (at this time, overvoltag전자/언더볼tage/overcurrent/leakage indicators are on at the same time). If no operation for 10S, it will automatically return to the voltage display interface.
- Long Press "clear/query" Key for 5S: Clear all fault times.
- Short Press "△/Mute" Key: Mute the buzzer sound.
- Short Press "test" Button: Perform leakage function test.
2. Operate in the Setting Interface
- Short Press "Set/Switch" Key: Switch and set the overvoltage setting value, undervoltage setting value, overcurrent setting value, and leakage setting value in turn.
- Short Press "△/Silence" Key: Adjust the currently set value increase.
- Short Press "▽" Key: Decrease the currently set value.
- Long Press "Set/Switch" Key: Exit the parameter setting.
When the automatic reclosing power supply protector wiring is installed correctly, connect the power supply. Turn on the "master control switch", and the automatic reclosing power protector will immediately turn on the circuit. Press the "Test" button, the auto-reclosing power protector will cut off the circuit, and the "leakage indicator" will be on, and the power will be restored automatically after 30 seconds. This means that the auto-reclosing power protector is working properly. At this point, you have correctly installed the "Auto" reclosing power supply protector, and you can rest assured to enjoy the safety and convenience brought by automatic reclosing leakage protection.
유지
The Automatic Reclosing Power Supply Protector is designed for low maintenance. However, regular checks can ensure its longevity and optimal performance.
- 시각적 검사: 주기적으로 장치를 검사하여 물리적 손상, 느슨한 연결 또는 변색의 징후가 있는지 확인하세요.
- 청소: 기기를 깨끗하게 유지하고 먼지와 이물질이 쌓이지 않도록 하십시오. 마른 부드러운 천으로 닦으십시오. 액체 세척제는 사용하지 마십시오.
- 기능 테스트: It is recommended to perform the leakage function test (short press "test" button) periodically to ensure the protection mechanism is working correctly.
- 환경 조건: Ensure the operating environment is within the specified temperature and humidity ranges to prevent premature wear.
문제 해결
If you encounter issues with your Automatic Reclosing Power Supply Protector, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | No power supply; incorrect wiring; master switch off. | Check main power supply; verify wiring according to diagram; ensure master control switch is on. |
| Protector trips frequently. | Overload, leakage, overvoltage, 또는 undervoltage condition detected; sensitive settings. | Identify and resolve the underlying electrical issue; check connected appliances; adjust protection settings if necessary (refer to Operating Instructions). |
| 디지털 디스플레이가 꺼져 있거나 오작동합니다. | 전원 문제, 내부 오류. | Ensure stable power supply; if problem persists, contact customer support. |
| Cannot clear fault times. | 버튼을 누르는 순서가 잘못되었습니다. | Long press "clear/query" key for 5 seconds as per Operating Instructions. |
보증 및 지원
This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the seller.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Please have your model number (01ok6p7d3zbm3687) and purchase information ready when contacting support.
제조업체: 01