1. 제품 오버view
The Ikea BAGGANAS 703.384.18 is a set of two stainless steel handles designed for cabinets and drawers. These handles offer a modern and clean aesthetic, suitable for various interior styles. Each handle measures 143mm in length and features a durable stainless steel finish.
- Set includes 2 BAGGANAS handles.
- Dimensions: Length 143 mm, Width 9 mm, Depth 31 mm.
- Required drilled hole diameter: 5 mm.
- Hole spacing (center-to-center): 128 mm.
- Finish: Stainless steel.
2. 안전 정보
Please read all instructions carefully before installation. Keep small parts and packaging materials away from children. Always use appropriate safety gear, such as eye protection, when drilling. Ensure the mounting surface is suitable for drilling and can support the handle securely.
3. 패키지 내용
- 2 x Ikea BAGGANAS Handles (Model: 703.384.18)
- Mounting screws (typically included with Ikea handles)
4. 설정 및 설치
필요한 도구:
- 연필
- 측정 테이프 또는 자
- 5mm 드릴 비트로 드릴
- Screwdriver (appropriate for the provided screws)
설치 단계:
- 측정 및 표시: Determine the desired position for your handle on the cabinet door or drawer front. Using a measuring tape and pencil, mark two points 128 mm apart (center-to-center) where the screws will go. Ensure the marks are level and centered as desired.
- 드릴 파일럿 홀: Carefully drill pilot holes at the marked points using a 5 mm drill bit. Drill straight through the material to avoid splintering.
- 핸들 부착: Align the handle with the drilled holes. Insert the mounting screws from the inside of the cabinet door or drawer and thread them into the handle.
- 나사를 조이세요: Using a screwdriver, tighten the screws until the handle is firmly secured. Do not overtighten, as this can damage the cabinet material or the handle.

This image displays the Ikea BAGGANAS handle, highlighting its sleek stainless steel finish and rectangular design. The handle measures 143mm in length and is ready for installation.
5. 운영
Once installed, the BAGGANAS handle functions as a pull for opening and closing cabinet doors or drawers. Grip the handle firmly and apply gentle force to operate the furniture component.
6. 유지관리 및 관리
To maintain the appearance and longevity of your stainless steel handles, follow these care instructions:
- 청소: 손잡이 부분은 부드러운 천으로 정기적으로 닦아주세요.amp물이나 부드럽고 연마성이 없는 세척 용액으로 세척하세요.
- 가혹한 화학 물질을 피하세요: 연마 세척제, 강철 양모 또는 화학 용제는 스테인리스 스틸 마감재를 긁거나 손상시킬 수 있으므로 사용하지 마십시오.
- 건조: Dry the handles immediately after cleaning to prevent water spots.
7. 문제 해결
- 느슨한 손잡이: If the handle becomes loose, gently tighten the mounting screws from the inside of the cabinet or drawer using an appropriate screwdriver. Do not overtighten.
- 긁힘: Minor surface scratches on stainless steel may sometimes be reduced using a specialized stainless steel polish and a soft cloth, following the product's instructions. Deep scratches may require professional attention or replacement.
8. 사양
| 기인하다 | 값 |
|---|---|
| 모델 번호 | 703.384.18 |
| 상표 | 이케아 |
| 재료 | 스테인리스 스틸 |
| 색상 | 은 |
| 전체 길이 | 143mm (XNUMXmm) |
| 너비 | 9mm (XNUMXmm) |
| Depth (Projection) | 31mm (XNUMXmm) |
| Hole Spacing (Center-to-Center) | 128mm (XNUMXmm) |
| Required Drilled Hole Diameter | 5mm (XNUMXmm) |
| 항목 수 | 2 |
| 용도 | 실내 |
9. 보증 및 지원
For information regarding warranty coverage or product support, please refer to your purchase receipt or contact the retailer where the product was purchased. You may also visit the official Ikea website for general customer service and support information.