EPEVER IP3000-12 Plus

EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter User Manual

Model: IP3000-12 Plus | Brand: EPEVER

1. 서론

Welcome to the EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter. This manual provides essential information for the safe and efficient operation of your inverter. The IPower-Plus series is designed to convert 12V DC battery power into 230V AC pure sine wave electricity, suitable for various applications including off-grid home emergency lighting and vehicle-mounted systems.

Key features include a 180-degree rotatable LCD display, compatibility with lithium batteries, and a USB output port. The inverter incorporates surge current suppression technology to protect lithium battery cells and the Battery Management System (BMS) from damage caused by high inrush currents. It also features low idle loss and a sleep mode for enhanced energy efficiency.

2. 안전 지침

WARNING: Failure to follow these safety instructions may result in serious injury, death, or damage to the inverter and other equipment.

  • Read this entire manual before installation and operation.
  • 설치는 자격을 갖춘 사람이 수행해야 합니다.
  • 과열을 방지하려면 인버터 주변을 적절하게 환기시키십시오.
  • Do not expose the inverter to water, rain, snow, or any liquids.
  • Connect the inverter to a battery bank with the correct voltag전자(12V DC).
  • Observe correct polarity when connecting DC input cables (+ to + and - to -). Reverse polarity will cause damage.
  • 연결부가 헐거워지거나 아크가 발생하는 것을 방지하기 위해 모든 연결부가 단단히 고정되었는지 확인하십시오.
  • Do not connect the inverter to an AC utility grid or other AC power sources.
  • Avoid short-circuiting the AC output.
  • Keep flammable materials away from the inverter.
  • 인버터 c를 열지 마십시오.asing; 내부에 사용자가 수리할 수 있는 부품이 없습니다.
  • 유지관리나 청소를 하기 전에는 반드시 전원을 분리하세요.

3. 제품 오버view

3.1 특징

  • 순수 사인파 출력: 민감한 전자기기에 적합한 고품질 AC 전원을 제공합니다.
  • 180-Degree Rotatable LCD Display: 유연성을 허용합니다 viewing angles of operational data.
  • 리튬 배터리 호환성: Designed to work effectively with lithium battery systems.
  • USB 출력: Integrated 5VDC / Max.1A USB port for charging small devices.
  • Surge Current Suppression: Protects battery cells and BMS from high inrush currents.
  • Low Idle Loss / Sleep Mode: Minimizes power consumption when no load or light load is present.
  • Isolated RS485 Communication Interface: (Optional) Enables remote monitoring, management, and settings adjustment via PC software or mobile app.

3.2개의 구성요소

The EPEVER IPower-Plus Series IP3000-12 Plus inverter includes the main unit and necessary connection accessories.

EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter, front view.

그림 1: 전면 view of the EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter. This image shows the main body of the inverter with its LCD display and branding.

Rear panel of the EPEVER IPower-Plus Series IP3000-12 Plus inverter showing connection terminals.

Figure 2: Rear panel of the EPEVER IPower-Plus Series IP3000-12 Plus inverter. This view highlights the DC input terminals, AC output terminals, USB port, and RS485 communication port.

맨 아래 view of the EPEVER IPower-Plus Series IP3000-12 Plus inverter with cooling fans.

그림 3: 하단 view of the EPEVER IPower-Plus Series IP3000-12 Plus inverter, showing the integrated cooling fans for thermal management.

포함된 구성 요소:

  • 인버터 유닛
  • RS485 Communication Port (integrated)
  • USB Output (integrated)
  • 접지 케이블
  • DC 입력 케이블
  • AC 출력 케이블

4. 설정

4.1 풀기 및 검사

  • Carefully unpack the inverter and all accessories.
  • Inspect the unit for any visible damage that may have occurred during shipping. Contact your supplier if any damage is found.
  • 섹션 3.2에 나열된 모든 구성 요소가 있는지 확인하세요.

4.2 장착

  • 직사광선, 열원 및 습기를 피해 건조하고 통풍이 잘 되는 장소를 선택하십시오.
  • Ensure there is sufficient clearance around the inverter for proper airflow, especially around the cooling fans.
  • Mount the inverter securely to a stable surface using appropriate fasteners. The mounting dimensions are 532 x 145mm.

4.3 배선 연결

CAUTION: Before making any connections, ensure the inverter is switched OFF and the battery bank is disconnected or fused.

  1. 접지: Connect the ground terminal of the inverter to an earth ground point using the provided ground cable. This is crucial for safety.
  2. DC 입력 연결:
    • Connect the positive (+) terminal of your 12V DC battery bank to the positive (+) DC input terminal on the inverter.
    • Connect the negative (-) terminal of your 12V DC battery bank to the negative (-) DC input terminal on the inverter.
    • Use appropriate cable gauge for the DC input to minimize voltag낙하를 방지하고 안전한 작동을 보장합니다.
  3. AC 출력 연결:
    • Connect your AC loads (appliances) to the AC output terminals of the inverter.
    • Ensure the total power consumption of your AC loads does not exceed the inverter's continuous power rating (3000W).
  4. Optional Connections (RS485 & USB):
    • If using the RS485 communication feature, connect the RS485 cable to the designated port for remote monitoring.
    • The USB port can be used to charge compatible 5VDC devices.

5. 사용 설명서

5.1 인버터 전원 켜기

  1. After all connections are securely made and verified, connect the battery bank (if not already connected).
  2. Switch on the DC input breaker or fuse, if installed.
  3. Press the power button on the inverter. The LCD display will illuminate, indicating the inverter is operational.
  4. The inverter will begin converting DC power to AC power.

5.2 Powering Off the Inverter

  1. Turn off all connected AC loads.
  2. Press and hold the power button on the inverter until the display turns off.
  3. Switch off the DC input breaker or fuse, and disconnect the battery bank if the inverter will not be used for an extended period.

5.3 LCD 디스플레이

The LCD display provides real-time operational data. It can be rotated 180 degrees for optimal viewing. Information typically displayed includes:

  • 입력 DC Voltage
  • 출력 AC 볼륨tage
  • 출력 전력(와트)
  • 출력 주파수(Hz)
  • 배터리 상태
  • 오류 코드(있는 경우)

6. 유지관리

정기적인 유지관리는 인버터의 수명과 최적의 성능을 보장합니다.

  • 청소: Periodically clean the exterior of the inverter with a dry cloth to remove dust and debris. Ensure cooling vents are clear. Do not use liquid cleaners.
  • 연결 확인: Annually inspect all electrical connections (DC input, AC output, ground) to ensure they are tight and free from corrosion. Loose connections can cause overheating and damage.
  • 통풍: Ensure the area around the inverter remains clear and well-ventilated. Check that the cooling fans are operating correctly when the inverter is under load.
  • 배터리 유지 관리: Follow the manufacturer's guidelines for your specific battery type. Ensure batteries are properly charged and maintained to prolong their lifespan and ensure stable power supply to the inverter.

7. 문제 해결

This section outlines common issues and their potential solutions. If the problem persists, contact customer support.

문제가능한 원인해결책
No AC Output / Inverter not turning on배터리 용량이 부족합니다tage
Loose DC connections
인버터 스위치 꺼짐
Blown DC fuse/breaker		Charge battery or check battery health
Check and tighten all DC connections
인버터 스위치를 켜십시오
Check and replace fuse/reset breaker
Overload Alarm / ShutdownConnected load exceeds inverter rating
High inrush current from inductive loads		Reduce total connected load
Start inductive loads one at a time; consider a higher capacity inverter if frequent
Overheating Alarm / Shutdown환기가 잘 안됨
과도한 주변 온도
Continuous high load		Ensure clear airflow around inverter
Relocate inverter to a cooler environment
Reduce load or operate intermittently
Abnormal AC Output Voltag전자/주파수낮은 DC 입력 볼륨tage
Faulty inverter		배터리 용량 확인tag전자와 연결
고객 지원에 문의하세요
USB 포트가 작동하지 않음Overload on USB port
Faulty USB device		Disconnect and reconnect USB device
Try a different USB device

7.1 보호 기능

The inverter is equipped with extensive protection features:

  • 역 극성 보호 : Prevents damage from incorrect DC input wiring.
  • 오버볼tage 보호: Shuts down if DC input voltag안전 한계를 초과했습니다.
  • 언더볼tage 보호: Shuts down to protect batteries from over-discharge.
  • 과부하 보호: Shuts down if AC output load exceeds rated capacity.
  • 단락 보호: Protects against damage from AC output short circuits.
  • 과열 보호: 내부 온도가 너무 높아지면 자동으로 전원이 꺼집니다.

8. 사양

매개변수값
시스템 배터리 용량tage12V 직류
연속 전력3000와트
Surge Power (5s)6000와트
출력 AC 볼륨tage220VAC (±3%); 230VAC (-7% ~ +3%)
출력 주파수50 / 60Hz ±0.2%
최대 효율성>94% (30% load)
무부하 전류<1.6A
USB 출력5VDC / Max.1A
RS485 Interface Output5VDC / 200mA
보호 등급IP20
치수(길이 x 너비 x 높이)557×231.5×123mm
장착 치수532 x 145mm
순중량10.5kg
출력파형순수한 사인 웨이브
인증CE, RoHS

9. 보증 및 지원

9.1 보증 정보

The EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter comes with a 2년 제조사 보증 구매일로부터. 본 보증은 정상적인 사용 및 서비스 과정에서 발생한 재료 및 제조상의 결함을 보장합니다.

보증은 다음 사항을 포함하지 않습니다:

  • 부적절한 설치 또는 배선으로 인한 손상.
  • 허가받지 않은 수리나 개조로 인해 발생한 손상.
  • Damage caused by natural disasters, accidents, or misuse.
  • Damage from operating the inverter outside its specified environmental limits.

9.2 기술 지원

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your EPEVER dealer or the official EPEVER customer support channel. Please have your product model number and purchase information ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.