Technics SL-1200MK7 다이렉트 드라이브 턴테이블 사용 설명서

소개

This manual provides essential instructions for the proper setup, operation, and maintenance of your Technics SL-1200MK7 Direct Drive Turntable. Please read this manual thoroughly before using the product to ensure optimal performance and longevity. Keep this manual for future reference.

Image: A black Technics SL-1200MK7 direct drive turntable, featuring a slipmat with the Technics logo, a tonearm, and pitch control faders. This image illustrates the overall design of the turntable.

안전 지침

To prevent electric shock, fire, damage, or injury, please observe the following safety precautions:

• 본 기기를 비나 습기에 노출시키지 마십시오.
• 덮개를 제거하지 마십시오. 정비는 자격을 갖춘 기술자에게만 맡기십시오.
• Ensure the unit is placed on a stable, level surface to prevent vibrations and ensure proper operation.
• Connect the unit to a grounded power outlet. Proper grounding is essential to prevent humming and ensure sound quality.
• 장치를 열원 근처나 직사광선에 노출시키지 마십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

상자 안에 무엇이 들어있나요?

Verify that all the following components are included with your Technics SL-1200MK7 turntable:

• 턴테이블 유닛
• 슬립매트
• Slipsheet
• 먼지 커버
• EP 레코드 어댑터
• 균형 무게
• 헤드 쉘
• Screw set for cartridge
• 포노 케이블
• PHONO 접지선
• AC 전원 코드
• 사용 설명서(본 문서)

설정

Follow these steps to properly set up your turntable:

1. 포장 풀기 및 배치: Carefully remove all components from the packaging. Place the turntable on a firm, level surface, away from speakers to minimize vibration feedback.
2. Stylus/Cartridge Installation: Attach your chosen cartridge to the head shell using the provided screw set. Note: A stylus is not included with the turntable and must be purchased separately.
3. Tonearm Balance and Tracking Force:
   • Attach the head shell with the cartridge to the tonearm.
   • Mount the balance weight onto the rear of the tonearm.
   • Adjust the balance weight until the tonearm is perfectly level (floating freely).
   • Set the tracking force ring to "0" while the tonearm is balanced.
   • Rotate the balance weight to apply the recommended tracking force for your cartridge (typically 0-4g, as per the turntable's adjustment range).
4. 안티 스케이팅 조정: Set the anti-skating dial to match the tracking force you applied. This helps prevent the stylus from skipping inwards.
5. Arm-Height Adjustment: The tonearm height can be adjusted from 0 to 6 mm to ensure the tonearm is parallel to the record surface when playing. Use the tonearm height adjustment ring at the base of the tonearm.
6. 연결 케이블:
   • Connect the PHONO cable from the turntable's output to the PHONO input on your amp수신자 또는 수신자.
   • Connect the PHONO earth lead (ground wire) from the turntable to the ground terminal on your amp리퍼. Proper grounding is crucial to eliminate hum.
   • Connect the AC power supply cord to the turntable and then to a wall outlet.
7. 먼지 커버: Place the dust cover on the turntable to protect it when not in use.

작동 지침

Once set up, operating your SL-1200MK7 is straightforward:

1. 전원 켜기: 전원 스위치를 사용하여 턴테이블을 켜십시오.
2. 속도 선택: Choose the appropriate speed (33-1/3, 45, or 78 rpm) using the speed selector buttons. For 78 rpm, ensure the switch is engaged.
3. 장소 기록: Carefully place a record on the platter. If playing an EP record, use the provided adaptor.
4. 재생 시작:
   • 큐잉 레버를 사용하여 톤암을 들어 올리십시오.
   • 를 누르세요 시작/중지 button to begin platter rotation. The platter will reach the selected speed quickly due to the direct drive system (approx. 0.7 seconds to 33 1/3 rpm).
   • Carefully position the stylus over the desired groove on the record.
   • Lower the tonearm gently using the cueing lever.
5. 피치 조절: Use the pitch control fader to fine-tune the playback speed if desired.
6. 재생 중지 : At the end of the record, or when you wish to stop, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the 시작/중지 button to halt platter rotation.

유지

Regular maintenance ensures the longevity and optimal performance of your turntable:

• 먼지 덮개 청소하기: Use a soft, dry cloth to wipe the dust cover. For stubborn marks, use a slightly damp 닦고 즉시 말리십시오. 연마성 세제 사용을 피하십시오.
• Cleaning the Platter and Chassis: Wipe the metal platter and turntable chassis with a soft, dry cloth. Do not use solvents or harsh chemicals.
• 스타일러스 관리: Regularly clean your stylus with a dedicated stylus brush or cleaner to remove dust and debris, which can affect sound quality and record wear.
• 기록 관리: Keep your records clean and stored properly to prevent dust accumulation and scratches.
• 액체를 피하세요: Do not spill liquids on the turntable. If liquid enters the unit, disconnect power immediately and consult a qualified technician.

문제 해결

턴테이블 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

명세서

Key technical specifications for the Technics SL-1200MK7 Direct Drive Turntable:

• 유형: Direct Drive Manual Turntable
• 턴테이블 속도: 33-1/3, 45 rpm (with switch 78 rpm)
• 시작 토크: 0.18 N·m / 1.8 kg·cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• 와우 그리고 설레다: 0.025% WRMS
• 플래터 직경: 332mm(13-5/64인치)
• Tonearm Effective Length: 230mm (9-1/16")
• Tonearm Overhang: 15mm (19/32")
• Tonearm Offset Angle: 22°
• 추적 오류 각도: Within 2° 32’ (at the outer groove of 30 cm (12") record) / Within 0° 32' (at the inner groove of 30 cm (12") record)
• Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
• Arm-height Adjustment Range: 0~6mm
• Head Shell Weight: 약 7.6g
• 전원 공급 장치: 교류 110-240V, 60Hz
• 전력 소비량: 8와트
• 치수(폭 x 높이 x 깊이): 453 x 169 x 353mm(17.8 x 6.7 x 13.9인치)
• 무게: 약. 9.6kg / 21.2파운드
• 재료: Metal (Chassis)
• 색상: 검은색

보증 및 지원

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Technics web대지.

온라인 리소스:

• Visit the Technics Store on Amazon
• 공식 기술 Web대지