MOMIMO Bike Tail Light with Turn Signals

1. 서론

Thank you for choosing the MOMIMO Bike Tail Light with Turn Signals. This device is designed to significantly enhance your visibility and safety while cycling, especially during night rides or in low-light conditions. Featuring ultra-bright LEDs, wireless remote control, and multiple lighting modes, it provides clear signaling capabilities for turns and warnings. Please read this manual thoroughly before installation and use to ensure proper operation and to maximize the lifespan of your product.

Image: The MOMIMO Bike Tail Light unit attached to a bike seat post, with its wireless remote control.

2. 안전 정보

• 주행 전에 후미등이 단단히 고정되어 있는지 반드시 확인하십시오.
• 전등이 켜져 있을 때 직접 쳐다보지 마십시오. 일시적인 시력 저하를 유발할 수 있습니다.
• 이 조명은 IPX4 방수 등급이지만, 장시간 물에 담그는 것은 피하십시오.
• Regularly check the battery level and charge the device to ensure optimal performance.
• Use turn signals appropriately and in conjunction with hand signals where required by local traffic laws.

3. 제품 오버view

구성 요소:

• Bike Tail Light Unit
• 무선 원격 제어
• Mounting Straps (for tail light and remote)
• USB 충전 케이블

이미지: 상세 view of the tail light unit, remote control, mounting accessories, and USB charging port.

주요 특징:

• Ultra Bright LED: 100 lm output for excellent visibility.
• 무선 원격 제어: Easily activate turn signals and change light modes.
• 다양한 조명 모드: Red light (solid), Red light-flashing, All flashing (hazard).
• 방향 지시등: Dedicated left and right turn indicators.
• 방수 디자인 : IPX4 rated for reliable performance in rainy conditions.
• 충전식 배터리: Built-in 1000mAh battery, charged via USB.
• 폭넓은 가시성: 270-degree visual range with adjustable angle.
• 라우드 스피커 : Integrated 120 decibel loudspeaker for audible alerts.

4. 설정

4.1 후미등 충전

Before first use, fully charge the tail light unit. Connect the supplied USB charging cable to the charging port on the back of the tail light and plug the other end into a USB power source (e.g., computer, wall adapter, power bank). The indicator light will show charging status.

4.2 Installing the Tail Light Unit

1. Select a suitable position on your bike's seat post.
2. Attach the mounting bracket to the seat post using the provided rubber strap. Ensure it is tight and stable.
3. Slide the tail light unit onto the mounting bracket until it clicks securely into place.
4. Adjust the angle of the tail light for optimal visibility (270-degree range).

Image: Step-by-step guide for attaching the tail light to the seat post.

4.3 무선 리모컨 설치

1. Choose a convenient location on your bike's handlebar, within easy reach of your thumb.
2. Use the smaller rubber strap to securely attach the remote control to the handlebar.
3. Ensure the remote is stable and does not interfere with braking or gear shifting.

4.4 페어링(필요한 경우)

The tail light and remote control are typically pre-paired from the factory. If they do not respond to each other, ensure both devices are powered on. Refer to the user manual for specific pairing instructions if needed, though the unboxing video suggests they are ready to use out of the box after removing the battery protector from the remote.

5. 사용 설명서

5.1 전원 켜기/끄기

Press the main power button on the tail light unit to turn it on or off. The remote control will automatically connect when the tail light is on.

5.2 조명 모드 전환

The tail light offers three primary modes for enhanced visibility:

• 빨간색 표시등 (점등): 지속적인 붉은색 조명.
• Red Light-Flashing: Red light flashes intermittently.
• All Flashing (Hazard): All LEDs (red and amber) flash simultaneously for maximum attention.

Use the central button on the remote control to cycle through these modes.

Image: Visual representation of the tail light's different illumination patterns.

5.3 Activating Turn Signals

The remote control has dedicated buttons for left and right turn signals:

• 를 누르세요 왼쪽 화살표 button to activate the left turn signal. The left amber LEDs on the tail light will flash, accompanied by an audible beep.
• 를 누르세요 오른쪽 화살표 button to activate the right turn signal. The right amber LEDs on the tail light will flash, accompanied by an audible beep.

Press the same arrow button again to deactivate the turn signal.

5.4 Using the Loudspeaker (Horn)

The tail light features a 120 decibel loudspeaker for alerting pedestrians or other cyclists. This is typically integrated with the turn signal activation, providing an audible cue when signaling a turn.

Image: A cyclist on a road at night, demonstrating the visibility and audible alert of the tail light.

6. 유지관리

6.1 후미등 충전

Charge the tail light regularly to ensure it is ready for use. A full charge typically takes approximately 2 hours. The light can be charged via a power bank, wall charger, laptop/PC, or car charger.

Image: Various methods for charging the tail light unit.

6.2 청소

부드러운 천으로 후미등과 리모컨을 닦으세요.amp 천으로 먼지와 이물질을 제거하세요. 연마성 세제나 용제는 사용하지 마세요.

6.3 방수

The device is IPX4 waterproof, meaning it is resistant to splashing water from any direction. While it can withstand rain, avoid submerging it in water for extended periods.

Image: The tail light being tested under splashing water, demonstrating its IPX4 waterproof rating.

7. 문제 해결

• 불이 켜지지 않음: 배터리가 충전되었는지 확인하세요. 전원 버튼을 단단히 누르세요.
• 리모컨이 응답하지 않음: Check if the remote's battery is functional (remove plastic protector if new). Ensure the tail light is powered on. Re-pair if necessary (refer to manual for specific steps).
• 방향지시등이 작동하지 않습니다. Verify the remote is paired and the tail light is on. Check for any obstructions.
• 배터리가 충전되지 않음: Ensure the USB cable and power source are working correctly. Check the charging port for debris.

8. 사양

Image: Diagram showing the dimensions of the tail light and remote control.

9. 보증 및 지원

MOMIMO products are manufactured to the highest quality standards. If you encounter any issues or have questions regarding your Bike Tail Light with Turn Signals, please contact our customer support. We are committed to providing excellent service and ensuring your satisfaction.

For warranty information and support, please refer to the contact details provided on the product packaging or our official web대지.