1. 서론
Thank you for choosing the NUWATT 50W LED Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before installation and retain them for future reference.
2. 안전 정보
- 설치나 정비를 하기 전에 항상 회로 차단기의 전원을 끄세요.
- 설치는 국가 및 지역 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- 공급 볼륨을 확인tage는 조명기구(120-277V)와 호환됩니다.
- 배선이나 부품이 손상된 상태로 제품을 작동하지 마십시오.
- LED 조명이 켜져 있을 때는 LED 광원을 직접 쳐다보지 마십시오.
- 이 조명기구는 실외 사용에 적합한 IP65 등급을 획득하여 먼지와 물 분사로부터 보호됩니다.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 1 x NUWATT 50W LED Flood Light (Bronze)
- 1 x Adjustable Knuckle Mount
- 설치용 하드웨어(나사, 전선 너트)
4. 사양
| 모델 | NW-SFL-50W-3CT-KN |
| 왓tage | 50와트 |
| 루멘 출력 | 7050루멘 |
| 효능 | 와트당 141루멘 |
| 색온도(CCT) | 3000K (Warm White), 4000K (Cool White), 5000K (Daylight) Selectable |
| 권tage | 120-277V AC |
| 밝기 조절 가능 | 0-10V 디밍 가능 |
| 빔 각도 | 150도 |
| IP 등급 | IP65 (방수) |
| 설치 | Adjustable Knuckle Mount (Surface, Bracket, Ceiling, Deck, Floor, Pole) |
| 재료 | Die-cast Aluminum Housing, Acrylic Lens |
| 치수 | 7.16인치 길이 x 1.85인치 너비 x 9.8인치 높이 |
| 인증 | UL, cUL, DLC Listed |
5. 설치 지침
중요한: 작업을 진행하기 전에 회로 차단기에서 전원이 꺼져 있는지 확인하십시오.
5.1 고정물 장착
- 장착 표면 준비: Select a suitable location for installation. The adjustable knuckle mount allows for various mounting options including surface, bracket, ceiling, deck, floor, or pole mounting.
- 장착 플레이트 부착: Secure the mounting plate (if applicable, sold separately) to the junction box or desired surface using appropriate hardware.
- Adjust Knuckle Mount: The knuckle mount provides 180-degree vertical and horizontal rotation. Loosen the adjustment screws on the knuckle mount to position the light head as desired, then tighten securely to prevent movement. The rugged locking teeth ensure the light stays in place.
Image: Versatile design demonstrating 180-degree vertical and horizontal rotation for precise light aiming.
5.2 Wiring the Fixture
The flood light features universal voltage compatibility (120-277V) and 0-10V dimming capabilities.
- 경로 전선: Insert the fixture's wires into the mounting plate and through the junction box opening.
- 전선 연결: Connect the fixture wires to the supply wires according to the following color code using appropriate wire nuts:
- 검은색: 라인(핫)
- 하얀색: 중립적
- 녹색: 지면
- 보라: Dimming (+)
- 회색: Dimming (-)
- 보안 고정 장치: Mount the light fixture to the mounting plate or junction box, ensuring all wires are properly tucked away and not pinched.
Image: Easy installation guide illustrating the wiring and mounting process to a junction box.
이미지: 앞면 view of the flood light with wiring, indicating the 3CCT color temperature options.
6. 사용 설명서
6.1 색온도 선택 (3CCT)
Your NUWATT flood light features a selectable color temperature switch, allowing you to choose between three options:
- 3000K: Warm White (for a softer, inviting ambiance)
- 4000K: Cool White (for a balanced, natural light)
- 5000K: Daylight (for bright, crisp illumination)
To change the color temperature, locate the small switch on the side of the fixture (often under a protective cap). Use a small tool to slide the switch to your desired setting. This adjustment should be made before final installation or with power off for safety.
Image: Illustration of the 3CCT selectable color temperature feature.
6.2 0-10V Dimming Function
This flood light is compatible with 0-10V dimming systems, allowing you to adjust the light intensity from 10% to 100%. Connect the purple (Dimming +) and gray (Dimming -) wires to a compatible 0-10V dimmer switch. Refer to your dimmer switch's instructions for proper wiring and operation.
Image: Demonstration of 0-10V dimming capability and compatible dimmer models.
7. 유지관리
The NUWATT LED Flood Light is designed for minimal maintenance due to its durable construction and IP65 rating.
- 청소: 렌즈와 하우징을 부드러운 천으로 주기적으로 청소하십시오.amp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents. Ensure the fixture is cool and power is off before cleaning.
- 점검: Regularly inspect the fixture for any signs of damage to the housing, lens, or wiring. Address any issues promptly.
- 내후성: The IP65 rating ensures protection against rain, snow, dust, and ice. The die-cast aluminum construction provides corrosion-free performance.
Image: Features demonstrating IP65 weatherproof design and advanced heat dissipation.
8. 문제 해결
투광등에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 불이 켜지지 않습니다 | 전원 공급 없음; 배선 불량; 조명기구 고장 | Check circuit breaker; Verify all wire connections; Contact customer support if issue persists. |
| 조명이 예기치 않게 깜박이거나 어두워집니다. | 호환되지 않는 디머; 디밍 배선이 헐거워짐; 볼륨tag전자 변동 | Ensure dimmer is 0-10V compatible; Check dimming wire connections; Consult an electrician for voltag전자 문제. |
| 잘못된 색온도 | CCT 스위치 설정이 잘못되었습니다 | Adjust the CCT switch on the fixture to the desired setting. |
| 설비 내부에 물이 있음 | 부적절한 설치; 손상된 씰 | Ensure all seals and connections are tight; Contact customer support for potential damage. |
9. 보증 및 지원
The NUWATT 50W LED Flood Light is backed by a 5년 한정 보증이 보증은 정상적인 사용 및 서비스 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다.
For warranty claims, technical assistance, or any questions regarding your product, please contact NUWATT customer support:
- Web대지: Visit the NUWATT Store on Amazon
- 지원 시간: 8 AM - 5 PM Pacific Standard Time
Please have your model number (NW-SFL-50W-3CT-KN) and purchase information ready when contacting support.