1. 소개 및 이상view
The Santa Fe Ultra98 Whole House Dehumidifier is engineered to provide efficient and effective humidity control throughout your entire home, particularly in basements and crawlspaces. This unit helps maintain optimal indoor air quality by reducing excess moisture, which can prevent mold growth, dust mites, and other humidity-related issues. This manual provides essential information for the safe installation, proper operation, and routine maintenance of your dehumidifier to ensure its optimal performance and longevity.

Image 1.1: The Santa Fe Ultra98 Whole House Dehumidifier, a compact unit designed for comprehensive humidity control.
2. 안전 정보
Please read all safety instructions carefully before installing or operating the Santa Fe Ultra98 Dehumidifier. Failure to comply with these instructions may result in property damage, personal injury, or death.
- 전기 안전: Ensure the unit is connected to a properly grounded electrical outlet. Do not use extension cords. All electrical work should be performed by a qualified electrician.
- 설치: The unit must be installed in accordance with local and national electrical codes. Ensure adequate clearance around the unit for proper airflow.
- 물 배수장치: Ensure the drainage hose is properly connected and routed to a suitable drain to prevent water damage.
- 유지: 유지관리나 청소를 하기 전에는 반드시 장치의 전원을 분리하세요.
- 어린이와 애완동물: 작동 및 유지관리 중에는 어린이와 애완동물이 장치에 접근하지 못하도록 하세요.
3. 제품 특징
The Santa Fe Ultra98 Dehumidifier incorporates several features designed for effective and reliable humidity control:
- 대용량: Removes up to 98 pints of moisture per day, suitable for areas up to 2300 square feet.
- 조용한 작동: Designed to operate with minimal noise, ensuring comfort in your living space.
- MERV-13 Air Filtration: Equipped with a MERV-13 filter to capture airborne particles, improving overall air quality.
- 내구성 있는 구조: Features a heavy-duty steel exterior for enhanced durability and longevity in various environments.
- Whole Home Dehumidification: Can be integrated into your home's HVAC system for comprehensive humidity management.
- 미국에서 제작: Engineered and assembled in the USA, ensuring quality craftsmanship.

Image 3.1: The Ultra98 unit demonstrating its capacity to remove up to 98 pints of moisture daily.

Image 3.2: Key features of the Ultra98, including whole-home dehumidification, MERV-13 filtration, and ease of use (with optional controller).

Image 3.3: A visual representation highlighting the product's manufacturing origin in the USA.
4. 설정 및 설치
Proper installation is crucial for the efficient operation of your Santa Fe Ultra98 Dehumidifier. It is recommended that installation be performed by a qualified HVAC professional.
4.1 풀기 및 검사
- 장치를 포장에서 조심스럽게 꺼냅니다.
- 제품에 배송 중 파손이 있는지 확인하십시오. 파손이 발견되면 즉시 공급업체에 보고하십시오.
- Verify all included components are present: the dehumidifier unit, four leveling feet, and a MERV 13 filter.

Image 4.1: The Santa Fe Ultra98 unit shown with its included accessories: leveling feet and a MERV 13 filter.
4.2 배치 고려 사항
- The Ultra98 is designed for installation in basements, crawlspaces, or attics.
- Ensure the unit is placed on a level surface. Use the adjustable leveling feet to stabilize the unit and minimize vibration.
- Allow sufficient space around the unit for airflow and maintenance access.
4.3 Ducting and Airflow
The Ultra98 can be installed as a stand-alone unit or ducted into your HVAC system for whole-house dehumidification. Consult the detailed installation guide for specific ducting configurations.

이미지 4.2: 전ample of the Ultra98 dehumidifier installed within a ducted system in a crawlspace environment.
4.4 배수 연결
Connect a suitable drain hose (not included) to the unit's drain port. Ensure the hose has a continuous downward slope to a floor drain, condensate pump, or other approved drainage system.
4.5 전기 연결
Connect the unit to a dedicated 120V, 15 Amp grounded electrical circuit. Refer to the wiring diagram in the full installation manual for detailed electrical requirements.
5. 사용 설명서
The Santa Fe Ultra98 Dehumidifier operates automatically to maintain desired humidity levels. An external control (purchased separately) is required for setting and monitoring humidity.
5.1 초기 시작
- After installation, ensure all connections (electrical, drainage, ducting) are secure.
- 장치의 전원을 켭니다.
- Set the desired humidity level on your external controller. A typical comfortable humidity range is between 45% and 55% Relative Humidity (RH).
5.2 External Controller
The Ultra98 is designed to work with an external dehumidistat or thermostat with dehumidification capabilities. This controller allows you to set the target humidity level, and the dehumidifier will cycle on and off as needed to maintain it.

이미지 5.1: 전ample of an external controller used to manage the dehumidifier's operation and set humidity levels.
5.3 동작 모드
The unit operates in an intermittent mode, activating only when the humidity level rises above the set point and deactivating once the desired level is reached. This ensures energy-efficient operation.
6. 유지관리
Regular maintenance ensures the longevity and efficiency of your Santa Fe Ultra98 Dehumidifier. Always disconnect power before performing any maintenance.
6.1 공기 필터 교체
The MERV-13 air filter should be inspected monthly and replaced every 3-6 months, or more frequently depending on usage and air quality. A dirty filter restricts airflow and reduces efficiency.
- 제습기를 끄고 플러그를 뽑으세요.
- Locate the filter access panel.
- 오래된 필터를 제거하여 올바르게 폐기하세요.
- Insert a new MERV-13 filter, ensuring the airflow arrow points towards the unit.
- Secure the filter access panel and restore power.

이미지 6.1: 클로즈업 view of the MERV-13 air filter, essential for maintaining air quality and unit efficiency.
6.2 코일 세척
Periodically inspect the evaporator and condenser coils for dirt and debris. If coils are dirty, clean them with a coil cleaner or a soft brush. Avoid bending the coil fins.
6.3 Drain Pan and Hose Inspection
Check the drain pan and hose regularly for blockages, algae growth, or leaks. Clean as necessary to ensure proper drainage.
7. 문제 해결
고객 지원에 문의하기 전에 다시 문의하세요.view 다음은 일반적인 문제와 해결 방법입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 제습기가 켜지지 않아요 | No power, external control off, or set point not met. | Check power connection, ensure external control is on, lower humidity set point. |
| Unit running but not removing moisture | Dirty air filter, blocked airflow, or low ambient temperature. | Replace air filter, clear obstructions, ensure room temperature is above 50°F (10°C). |
| 장치에서 물이 새는 현상 | Clogged drain hose, improper hose slope, or loose connection. | Clear drain hose, ensure continuous downward slope, tighten hose connections. |
| 과도한 소음 | Unit not level, loose components, or fan obstruction. | Adjust leveling feet, check for loose parts, inspect fan for obstructions. |
8. 사양
Detailed technical specifications for the Santa Fe Ultra98 Whole House Dehumidifier:
| 사양 | 값 |
|---|---|
| 상표 | 산타페 |
| 모델명 | Ultra98 |
| 품목 모델 번호 | 4044300 |
| 제습 능력 | 하루 98파인트 |
| 권장 바닥 면적 | 최대 2300평방피트 |
| 제품 크기(L x W x H) | 35 x 19 x 25 인치 |
| 품목 무게 | 95 파운드 |
| 색상 | 하얀색 |
| 특징 | 조용한 작동 |
| 작동 모드 | 간헐적 |
| 상한 온도 등급 | 화씨 95도 |
| 필터 유형 | MERV-13 |
| 한국어: | 859029004649 |

Image 8.1: The Santa Fe Ultra98 dehumidifier with its key dimensions indicated for installation planning.
9. 보증 및 지원
The Santa Fe Ultra98 Dehumidifier comes with a manufacturer's warranty. For specific warranty details, including coverage duration and terms, please refer to the warranty card included with your product or visit the official Santa Fe website. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Santa Fe customer service.
제조업체: 산타페
EU 예비 부품 공급 기간: 5년
추가 지원이 필요하면 다음을 방문하세요. Santa Fe Store on Amazon.







