Tech 21 Bass Fly Rig v2 Bass Multi-effects Pedal User Manual

제품 끝view

The Tech 21 Bass Fly Rig v2 is a compact, all-analog multi-effects pedal designed for bass guitarists. It integrates a complete bass rig, including amplifier and effects, into a single unit. This pedal features Tech 21's SansAmp technology, offering two footswitchable channels for authentic bass amp tones. It also includes two SansAmp Character modes, a Bite switch, and an active post-EQ section for comprehensive sound shaping. Additional features include a FET compressor, a versatile EFX section, an effects loop, and a built-in chromatic tuner, providing a comprehensive solution for bass players seeking convenience without compromising tone or functionality.

주요 특징

• 2-channel Bass Multi-effects Pedal with Switchable Channels
• Integrated Effects Loop
• Built-in FET Compressor
• Octafilter Effect
• Authentic SansAmp 기술
• 반음계 튜너

그림 1: 상향식 view of the Tech 21 Bass Fly Rig v2, showcasin컨트롤 및 풋스위치를 조작합니다.

설정

Before operating the Bass Fly Rig v2, ensure all connections are made correctly. This unit requires a stable power supply and proper audio signal routing.

1. 전원 연결: Connect the included power supply to the DC input jack on the rear of the unit. Plug the power supply into a suitable electrical outlet. The unit operates on 240 Volts and draws 100 Milliamps.
2. 기기 입력: Connect your bass guitar to the 1/4" IN jack on the rear of the pedal using a standard instrument cable.
3. 오디오 출력: Connect the 1/4" OUT jack on the rear of the pedal to your amplifier's input, a mixing console, or an audio interface. For direct connection to a PA system or recording device, use the XLR output located on the side of the unit.
4. 이펙트 루프(선택 사항): If using external effects pedals, connect the SEND jack to the input of your external pedal(s) and the RETURN jack to the output of your external pedal(s).

Figure 2: Rear panel connections including IN, SEND, RETURN, OUT, and DC power input.

그림 3: 측면 view of the unit, highlighting the XLR output for direct connection.

작동 지침

The Bass Fly Rig v2 offers a range of effects and tone-shaping capabilities. Familiarize yourself with the controls to achieve your desired sound.

그림 4: 자세한 상단 view of the Bass Fly Rig v2, illustrating the layout of knobs and footswitches for various effects and channels.

산스Amp 부분

• Channel Footswitch: Toggles between two distinct SansAmp channels. Each channel can be configured independently for different tones.
• Character Modes: Two SansAmp Character modes provide additional tonal variations, allowing for a wider range of amplifier emulations.
• 바이트 스위치: Engages a high-end boost for added presence and clarity.
• Active Post-EQ: Adjusts the tone after the SansAmp section, providing further sound sculpting with Bass, Mid, and Treble controls.
• 운전하다: Controls the amount of gain and overdrive.
• 수준: Adjusts the overall output volume of the SansAmp 부분.

EFX 섹션

• Chorus/Tuner Footswitch: Activates the Chorus effect. Holding this footswitch engages the built-in chromatic tuner. The display will show the note being played.
• Octafilter Footswitch: Engages the Octafilter effect, which combines an octave-down effect with a filter.
• 통제 수단: Dedicated knobs for each effect allow for adjustment of parameters such as blend, depth, and filter frequency.

압축기 섹션

• Compressor Footswitch: Activates the FET compressor, providing dynamic control and sustain.
• 컴프 노브: 압축량을 조절합니다.
• 레벨 노브: Controls the output level of the compressor.

효과 루프

The integrated effects loop allows for the insertion of external pedals into the signal chain. This is useful for effects that perform best after the preamp section, such as modulation or time-based effects.

유지

Proper maintenance ensures the longevity and optimal performance of your Bass Fly Rig v2.

• 청소: Use a soft, dry cloth to clean the exterior of the unit. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish or internal components.
• 저장: Store the pedal in a cool, dry environment away from direct sunlight, extreme temperatures, and high humidity. When transporting, use a protective case to prevent physical damage.
• 사이: 모든 케이블 연결 부위의 마모나 손상을 주기적으로 점검하세요. 잭에 먼지나 이물질이 없는지 확인하세요.
• 전원 공급 장치: Always use the original or a compatible power supply to prevent damage. Disconnect power when the unit is not in use for extended periods.

문제 해결

If you encounter issues with your Bass Fly Rig v2, refer to the following common problems and solutions.

• 사운드 출력 없음:
  • Ensure the power supply is correctly connected and the unit is receiving power.
  • Check all instrument cables (input, output, effects loop) for proper connection and functionality.
  • 귀하의 것을 확인하십시오 amplifier or audio interface is powered on and correctly configured.
  • Ensure the Level knobs on the pedal are not set to minimum.
• Unwanted Noise (Hiss, Hum, Pops):
  • Ensure you are using the correct power supply. Incorrect power can introduce noise.
  • Check for faulty cables or connections. Try swapping cables to isolate the issue.
  • If a loud pop occurs when engaging the compressor, ensure the unit is properly grounded and try a different power outlet. If the issue persists, contact customer support.
  • Reduce gain/drive settings if excessive hiss is present.
• Unit Not Powering On / Intermittent Power:
  • Verify the power adapter is fully inserted into the DC input jack and the wall outlet.
  • 전원 케이블에 손상이 있는지 확인하세요.
  • If the power connection feels loose or intermittent, contact customer support as this may indicate a hardware issue.
• 소리가 왜곡되거나 불분명함:
  • Check the Drive and Level settings. Excessive drive can lead to unwanted distortion.
  • Ensure your instrument's output level is not overloading the pedal's input.
  • Adjust the active post-EQ settings to balance the tone.

명세서

보증 정보

The Tech 21 Bass Fly Rig v2 is covered by a 2년 보증 from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Tech 21 web사이트를 방문하거나 고객 지원팀에 문의하세요.

고객 지원

For further assistance, technical support, or service inquiries regarding your Tech 21 Bass Fly Rig v2, please visit the official Tech 21 website or contact their customer service department. Contact information and support resources can typically be found on the manufacturer's official product page or support section.

제조업체: Tech 21

Web대지: www.tech21nyc.com