1. 서론
The Antec NX260 is a mid-tower ATX gaming PC case designed to accommodate high-performance components. It features a fine mesh front panel for optimal airflow, a tempered glass side panel to showcase your build, and includes three 120mm ARGB fans for effective cooling and customizable lighting. This manual provides essential information for setting up, operating, and maintaining your NX260 case.
2. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Antec NX260 ATX Mid-Tower PC Case
- 3 x 120mm ARGB Fans (pre-installed in the front)
- Accessory Box (containing screws, standoffs, and cable ties)
- 사용 설명서 (본 문서)
3. 기술 사양
| 특징 | 사양 |
|---|---|
| 모델명 | NX260 |
| 케이스 유형 | 미드타워 |
| 치수(D x W x H) | 50.6 x 28.4 x 44.5cm(19.9 x 11.2 x 17.5인치) |
| 무게 | 4.3kg(9.48파운드) |
| 재료 | 강철, 강화 유리 |
| 마더보드 지원 | ATX, 마이크로 ATX |
| 확장 슬롯 | 7 |
| 드라이브 베이 | 2 x 3.5" HDD / 2.5" SSD (convertible), 2 x 2.5" SSD |
| 전면 I / O 포트 | Power, LED Control Button, 1 x USB 3.0, 2 x USB 2.0, HD-AUDIO |
| 포함된 팬 | 3 x 120mm ARGB fans (Front) |
| 팬 지원(최대) | Front: 3 x 120mm / 2 x 140mm; Top: 2 x 120mm; Rear: 1 x 120mm; PSU Shroud: 2 x 120mm |
| 라디에이터 지원 | 전면: 최대 360mm; 후면: 120mm |
| 최대 GPU 길이 | 310mm |
| 최대 CPU 쿨러 높이 | 160mm |
| 최대 PSU 길이 | 185mm (with HDD), 310mm (without HDD) |
4. 설정 및 설치
4.1. 설치 전 체크리스트
- Ensure you have all necessary components (motherboard, CPU, GPU, PSU, storage, RAM).
- Gather essential tools: Phillips head screwdriver, cable ties (some included).
- 깨끗하고 정전기가 없는 표면에서 작업하십시오.
4.2. Component Installation Guide
- 사이드 패널 제거: Carefully unscrew the tempered glass side panel and the solid steel side panel. Place them aside on a soft, flat surface to prevent scratches.
- 마더보드 설치: Align your ATX or Micro ATX motherboard with the standoffs inside the case. Secure it with the provided screws.
- CPU 쿨러 설치: If using an air cooler, install it according to its manufacturer's instructions, ensuring it does not exceed the 160mm height limit. For liquid cooling, install the radiator (up to 360mm in front, 120mm in rear) and then the CPU block.
- 그래픽 카드(GPU) 설치: Insert your graphics card into the appropriate PCIe slot on your motherboard. Ensure it is securely seated and fastened with the expansion slot screws. The case supports GPUs up to 310mm in length.
- 저장 드라이브 설치:
- For 3.5" HDDs or 2.5" SSDs: Use the convertible drive bays located in the PSU shroud area.
- For 2.5" SSDs: Mount them on the dedicated SSD trays behind the motherboard tray.
- 전원 공급 장치(PSU) 설치: Mount your PSU in the bottom rear compartment of the case. Ensure the fan faces downwards (if the case has bottom ventilation) or upwards. Secure it with screws. The case supports PSUs up to 185mm in length with HDDs installed, or 310mm without HDDs.
- 전면 패널 케이블 연결: Connect the front panel I/O cables (Power, Reset, USB 3.0, USB 2.0, HD-AUDIO, LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for correct pin assignments.
- 케이블 관리 : Utilize the space behind the motherboard tray and the cable routing cutouts to neatly organize your cables. Use the included cable ties to secure them, improving airflow and aesthetics.
- 측면 패널을 다시 설치하십시오: 모든 구성품 설치 및 케이블 정리가 완료되면 양쪽 측면 패널을 조심스럽게 다시 부착하십시오.
5. 사용 설명서
5.1. 시스템 전원 켜기
After completing the installation and connecting all external peripherals (monitor, keyboard, mouse, power cable), press the power button located on the front I/O panel to start your computer.
5.2. ARGB 팬 제어
The Antec NX260 includes three pre-installed 120mm ARGB fans in the front. These fans are controlled via a dedicated LED button on the front I/O panel.
- 조명 효과 변경: Press the LED button briefly to cycle through various pre-set ARGB lighting modes and colors.
- 불 끄기: Press and hold the LED button for a few seconds to turn off the ARGB lighting. Repeat the action to turn them back on.
메모: The included ARGB fans use a proprietary connection and are controlled directly by the case's integrated controller. They may not be compatible with motherboard ARGB software synchronization without an additional adapter (not included).
6. 유지관리
정기적인 유지관리는 PC 케이스의 최적의 성능과 수명을 보장하는 데 도움이 됩니다.
- 먼지 청소: Periodically clean the mesh front panel and any dust filters (if present) to maintain good airflow. Use compressed air or a soft brush to remove accumulated dust.
- 강화 유리 패널: Clean the tempered glass side panel with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that could damage the glass or coating.
- 내부 청소 : 시스템 전원을 끄고 플러그를 뽑은 후 압축 공기를 사용하여 내부 부품과 팬 블레이드의 먼지를 제거하십시오.
7. 문제 해결
If you encounter issues with your Antec NX260 case, consider the following:
- 선풍기가 돌아가지 않거나 불이 켜지지 않음:
- Check if the fan power cables are securely connected to the case's fan controller or motherboard headers.
- Ensure the SATA power connector for the fan controller is connected to your PSU.
- Verify that the LED button is not in the 'off' state (press it briefly or hold to cycle modes).
- 전면 USB 포트가 작동하지 않습니다:
- Ensure the USB 3.0 and USB 2.0 headers from the front panel are correctly connected to your motherboard. Refer to your motherboard manual for correct pin orientation.
- 전면 오디오 잭이 작동하지 않습니다:
- Verify that the HD-AUDIO cable from the front panel is correctly connected to the audio header on your motherboard.
- Check your operating system's audio settings and drivers.
- 전원 버튼이 응답하지 않음:
- Ensure the power switch cable from the front panel is correctly connected to the power header on your motherboard.
8. 보증 및 지원
8.1. 보증 정보
The Antec NX260 PC case comes with a manufacturer's warranty. For specific details regarding warranty duration and coverage in your region, please refer to the warranty card included with your product or visit the official Antec website. Spare parts availability in the EU is guaranteed for 2 years from the date of purchase.
8.2. 기술 지원
For technical assistance, troubleshooting beyond this manual, or inquiries about replacement parts, please contact Antec customer support through their official website. Have your product model (NX260) and proof of purchase ready when contacting support.