소개
The Behringer CLOCKED SEQUENTIAL CONTROL MODULE 1027 is a faithful reproduction of the legendary 2500 Series 8-position step sequencer. Designed for Eurorack systems, this module provides precise control over voltage and gate signals, making it an essential tool for creating complex melodic and rhythmic patterns in your modular synthesizer setup. Its robust design and intuitive interface ensure reliable performance and creative flexibility.
중요 안전 지침
- Read these instructions thoroughly before operating the module.
- 이 지침을 향후 참고용으로 보관하세요.
- 제품과 설명서에 있는 모든 경고에 유의하십시오.
- 안전한 작동을 위해 모든 지침을 따르세요.
- 이 기기를 물이나 습기가 있는 곳에서 사용하지 마십시오.
- 마른 천으로만 닦으십시오.
- 환기구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오.
- 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
- 제조사가 지정한 부속품/액세서리만 사용하세요.
- 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오. 장비가 어떤 식으로든 손상된 경우 서비스가 필요합니다.
설정
유로랙 설치
The CLOCKED SEQUENTIAL CONTROL MODULE 1027 is designed for installation into a standard Eurorack case. Ensure your Eurorack case has sufficient power and space (16 HP width) before installation.
- 전원 끄기 : Always disconnect power from your Eurorack case before installing or removing any modules.
- 설치: Align the module with an available 16 HP space in your Eurorack case. Secure it using the provided screws.
- 전원 연결: Connect the 16-pin power cable from your Eurorack power supply to the module's power header. Ensure the red stripe on the cable aligns with the -12V pin on both the module and the power supply. Incorrect connection can damage the module and/or power supply.
- 전원 켜기: Once securely mounted and connected, you can power on your Eurorack case.
그림 1: 전면 view of the Behringer 1027 module, showing all controls and patch points. This image illustrates the module's layout for proper installation and connection within a Eurorack system.
초기 연결
To begin using the 1027, connect its outputs to other modules in your Eurorack system. Common connections include:
- Clock Input (CLK IN): Connect a clock signal from another module (e.g., an LFO or clock divider) to the CLK IN jack to drive the sequencer.
- CV Outputs (CH A, CH B, CH C): Patch these outputs to the CV inputs of oscillators, filters, or other modules to control pitch, cutoff, or other parameters.
- Gate Outputs (POSITION GATES 1-8): Connect these to gate inputs of envelope generators or drum modules to trigger events at specific steps.
그림 2: 클로즈업 view of the input and output jacks on the Behringer 1027 module, highlighting the various patch points for integration into a modular system.
작동 지침
위에view 컨트롤의
The 1027 module features a clear layout of controls for intuitive sequencing:
- 속도 조절 손잡이: Adjusts the speed of the internal clock. The range switch (LOW/HIGH) selects the clock speed range.
- PULSE WIDTH Knob: Controls the width of the gate pulses. The switch (INT/EXT) selects between internal control or external CV control.
- 온 / 오프 스위치: Toggles the sequencer's operation.
- STEP Buttons (1-8): Each step has a corresponding button to activate/deactivate it.
- CV Knobs (A, B, C for each step): Adjust the control voltage output for each of the three channels (A, B, C) at each step.
- POSITION GATES (1-8): Individual gate outputs for each step.
- STEP/RESET Buttons: Manual step advance and reset functions.
그림 3: 각도 view of the Behringer 1027 module, providing a clear perspective of the control knobs and buttons for each step and channel.
Creating a Sequence
- 시계 설정: 사용하세요 비율 손잡이와 낮음/높음 switch to set the desired tempo. Alternatively, connect an external clock to the 클락 인 잭.
- Activate Steps: 를 누르세요 단계 buttons (1-8) to activate the desired number of steps in your sequence. Active steps will typically illuminate.
- Adjust CV: For each active step, turn the CV Knobs (A, B, C) 볼륨을 설정하려면tage level for each channel. These voltages will be outputted sequentially.
- Configure Gates: 그만큼 포지션 게이트 will output a pulse when their corresponding step is active. Use these to trigger envelopes or other events.
- 시작/중지: 사용하세요 켜짐/꺼짐 switch to start and stop the sequence.
고급 기능
- External Pulse Width Control: Connect a CV source to the EXT input for the PULSE WIDTH section to dynamically control the gate pulse width.
- Manual Step/Reset: 그만큼 단계 그리고 다시 놓기 buttons allow for manual control over the sequence progression, useful for live performance or precise programming.
유지
청소
To maintain the appearance and functionality of your module:
- Always power off your Eurorack system before cleaning.
- Use a soft, dry, lint-free cloth to wipe the module's surface.
- 완고한 먼지에는 약간 damp천에 물을 묻혀 닦으세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
- Do not allow any liquids to enter the module through jacks or openings.
저장
When not in use for extended periods, store the module in a cool, dry place, away from direct sunlight and extreme temperatures. If removed from the Eurorack case, store it in anti-static packaging.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 모듈의 전원이 켜지지 않습니다. | Incorrect power cable connection; Eurorack power supply off or faulty. | Check power cable orientation (red stripe to -12V). Ensure Eurorack power supply is on and functioning correctly. |
| Sequencer not advancing steps. | No clock signal; ON/OFF switch is OFF; RATE knob set too low. | Connect a clock signal to CLK IN. Ensure ON/OFF switch is ON. Increase the RATE knob setting. |
| No CV output from a channel. | CV knob for that step/channel is at minimum; step is not active. | Adjust the corresponding CV knob. Ensure the step is active (illuminated). |
| No Gate output from a position. | Step is not active; PULSE WIDTH set to minimum. | Ensure the step is active. Increase the PULSE WIDTH setting. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | 1027 |
| 모듈 유형 | 클럭 순차 제어 모듈 |
| 시리즈 | 2500 시리즈 |
| 체재 | 유로 랙 |
| 너비 | 16마력 |
| 깊이 | Not specified (typical Eurorack depth) |
| 전력 소비 | Not specified (standard Eurorack +12V, -12V) |
| 입력 | Clock In, External Pulse Width CV |
| 출력 | 3 x CV (A, B, C), 8 x Gate (Position Gates) |
| 치수(높이 x 너비 x 깊이) | 43 x 162 x 129mm(약 1.69 x 6.38 x 5.08인치) |
| 품목 무게 | 0.77파운드(약 0.35kg) |
| 연결 기술 | 3.5mm TS jack |
| 전원 | DC power supply (via Eurorack bus) |
보증
Behringer products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please visit the official Behringer website or the Music Tribe Community portal. Warranty services are typically handled through authorized service centers.
보증 설명: Community. Musictribe. Com.
지원하다
For further assistance, technical support, or to download the latest firmware and documentation, please visit the official Behringer web대지:
- 베링거 공식 Web대지
- Music Tribe Community (for warranty and support information)
You can also contact your local Behringer dealer or distributor for product-specific inquiries.