1. 소개 및 이상view
The ILM Model 159 Modular Motorcycle Helmet is designed to provide superior protection and comfort for riders. This helmet features a modular flip-up design, dual visors, and an advanced ventilation system, meeting or exceeding DOT safety standards. Its lightweight ABS shell and high-density EPS liner ensure both safety and a comfortable riding experience.
주요 특징은 다음과 같습니다.
- Modular Flip-Up Design: Allows for easy conversion between full-face and open-face configurations.
- Dual Visor System: Includes a clear outer visor for impact resistance and an inner dark sun visor for glare protection.
- Advanced Ventilation: Multiple air intake and exhaust vents promote airflow, keeping you cool and comfortable.
- DOT 승인: Certified to meet Department of Transportation safety standards.
- Quick Release Buckle: Ensures a secure fit and easy removal.
- Removable & Washable Liner: For easy cleaning and hygiene maintenance.
2. 설정 및 맞춤
2.1 Sizing and Proper Fit
A proper fit is crucial for safety and comfort. Refer to the size chart below to determine your correct helmet size. The helmet should fit snugly around your head without causing pressure points. Your cheeks should be compressed slightly, and the helmet should not move freely when you shake your head.
2.2 Adjusting the Quick Release Buckle
The helmet is equipped with a quick-release buckle for secure fastening and easy removal. To fasten, insert the male end into the female receiver until it clicks. To release, press the red button on the female receiver.
2.3 Removing Visor Protective Film
Before first use, carefully peel off any protective film from both the clear outer visor and the inner sun visor to ensure optimal visibility.
3. Operating the Helmet Features
3.1 Main Visor Operation
The clear outer visor can be easily raised and lowered. Use the tab located at the bottom center of the visor to lift it up or push it down. The visor has multiple detent positions for varying levels of opening.
3.2 Inner Sun Visor Operation
The inner dark sun visor provides additional eye protection from sunlight. It is operated by a switch located on the side of the helmet. Slide the switch forward to deploy the sun visor and backward to retract it.
3.3 Modular Flip-Up Mechanism
To raise the front section of the helmet, locate the release button/latch, typically found near the chin bar. Press the button and lift the chin bar upwards until it locks into the open position. To close, press the release button again and push the chin bar down until it securely latches.
3.4 환기 시스템
The helmet features multiple vents for optimal airflow. Adjust the front, top, and rear vents by sliding their respective covers to open or close them, controlling the internal air circulation.
4. 유지관리 및 관리
4.1 헬멧 쉘 청소
Clean the helmet's exterior with a soft cloth, mild soap, and lukewarm water. Avoid harsh chemicals or abrasive cleaners, as they can damage the finish and protective coatings.
4.2 Cleaning Visors
The clear and sun visors should be cleaned with a soft, lint-free cloth and clean water. For stubborn dirt, use a specialized helmet visor cleaner. Do not use ammonia-based cleaners.
4.3 Removable and Washable Liner
The helmet's interior liner and cheek pads are removable and washable. Gently detach them from the helmet. Hand wash with mild soap and cold water, then air dry completely before reinserting. Ensure all components are dry to prevent mildew.
5. 안전 정보
The ILM Model 159 helmet is DOT approved, meaning it meets the safety standards set by the U.S. Department of Transportation. Always wear your helmet correctly fastened and ensure all components are in good working order before riding. Replace your helmet after any impact, even if visible damage is not apparent.
5.1 Emergency Helmet Removal Device
Some helmets are equipped with an emergency helmet removal device. Familiarize yourself with its location and operation, which is designed to assist emergency personnel in safely removing the helmet after an accident.
6. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | 159 |
| 상표 | 일림엠(ILM) |
| 인증서 유형 | DOT, ETL |
| 쉘 유형 | 딱딱한 |
| 폐쇄 유형 | 퀵 릴리스 |
| 재료 | Acrylonitrile Butadiene Styrene (ABS), Expanded Polystyrene (EPS) |
| 품목 무게 | 3.86파운드(1750그램) |
| 제품 치수 | 14 x 10 x 10 인치 |
| 특별 기능 | Lightweight, Dual Visor |
| 차량 서비스 유형 | ATV, Cruiser, PWC, Street Bike |
7. 문제 해결
If you encounter any issues with your ILM Model 159 helmet, please refer to the relevant sections of this manual. For problems not addressed here, or for further assistance, contact ILM customer support.
8. 보증 및 지원
ILM provides a limited warranty for manufacturing defects. Please retain your proof of purchase for warranty claims. For detailed warranty information, product support, or to purchase replacement parts, visit the official ILM web사이트 또는 고객 서비스 부서에 문의하십시오.
Official ILM Web대지: ILM Store on Amazon
9. 제품 비디오
9.1 Modular Motorcycle Helmet Overview
이 영상은 간결한 내용을 제공합니다.view of the ILM modular motorcycle helmet, demonstrating its key features and functionality, including the flip-up mechanism and visor operation.