PELONIS PHOENIX 13M

PELONIS PHOENIX 13M 2500W 오일 충전 라디에이터 사용 설명서

Model: PHOENIX 13M (PHO25A3ABWDE)

1. 서론

Thank you for choosing the PELONIS PHOENIX 13M 2500W Oil-Filled Radiator. This manual provides important information for the safe and efficient operation of your new heater. Please read it thoroughly before use and retain it for future reference.

This oil-filled radiator is designed to provide consistent and gentle warmth to your living spaces. It features 3D convection technology and VOLCANO technology for efficient heat distribution, along with multiple safety features for peace of mind.

PELONIS PHOENIX 13M 2500W Oil-Filled Radiator, white with black fins and control knobs

이미지 1.1: 앞면 view of the PELONIS PHOENIX 13M Oil-Filled Radiator.

2. 중요 안전 지침

전기 제품을 사용할 때는 화재, 감전, 인명 피해 위험을 줄이기 위해 다음 사항을 포함한 기본 예방 조치를 항상 따라야 합니다.

  • 이 히터를 사용하기 전에 모든 지침을 읽으세요.
  • 이 히터를 야외에서 사용하지 마십시오.
  • 이 히터는 사용 중 뜨거워집니다. 화상을 피하기 위해 맨살이 뜨거운 표면에 닿지 않도록 하십시오.
  • 사용하지 않을 때는 항상 히터의 플러그를 뽑아두세요.
  • 코드나 플러그가 손상된 경우, 히터가 고장난 경우, 히터를 떨어뜨린 경우 또는 어떤 식으로든 손상된 경우에는 히터를 작동하지 마십시오.
  • 카펫 아래로 코드를 놓지 마십시오. 코드를 러그, 러너 또는 이와 유사한 덮개로 덮지 마십시오. 코드를 교통 구역에서 멀리하고 걸려 넘어지지 않는 곳에 정리하십시오.
  • 히터를 분리하려면 컨트롤을 OFF로 돌린 다음 콘센트에서 플러그를 뽑습니다.
  • 감전이나 화재가 발생하거나 히터가 손상될 수 있으므로 통풍구나 배기구에 이물질을 넣거나 이물질이 들어가지 않도록 주의하세요.
  • 화재 가능성을 예방하려면 공기 흡입구나 배출구를 어떤 식으로든 막지 마십시오. 침대와 같이 구멍이 막힐 수 있는 부드러운 표면에서는 사용하지 마십시오.
  • This heater has internal overheat protection and tip-over protection. If the heater overheats or tips over, it will automatically shut off.
  • The heater is constructed with a durably sealed ERW casting and high-quality oil, ensuring no oil leakage.
  • 히터가 작동하는 동안에는 어린이와 애완동물이 히터에 접근하지 못하도록 하세요.
Image showing the PELONIS oil-filled radiator with icons for overheat protection, tip-over protection, anti-scald, and GS listed, emphasizing safety certification.

Image 2.1: Visual representation of the multiple safety features including overheat and tip-over protection.

3. 패키지 내용

포장을 개봉하신 후 내용물을 확인해 주십시오. 누락되거나 손상된 품목이 있을 경우 고객 지원 센터로 문의해 주십시오.

  • 1 x PELONIS PHOENIX 13M Oil-Filled Radiator
  • 2 x Wheel Assemblies
  • 1 x 사용 설명서

4. 설치 및 조립

The PELONIS PHOENIX 13M radiator is designed for easy assembly and mobility.

4.1 바퀴 부착

  1. 라디에이터를 조심스럽게 뒤집어 안정적인 위치에 놓으십시오.
  2. Locate the wheel attachment points at the bottom of the radiator.
  3. Insert the wheel assemblies into the designated slots. Ensure they click securely into place.
  4. Return the radiator to an upright position. The hidden, silent-running casters allow for easy movement.
Person moving the PELONIS oil-filled radiator with a handle, showing the hidden wheels at the bottom for portability.

Image 4.1: Demonstrating the portability of the radiator with its hidden wheels.

4.2 배치

  • 히터를 단단하고 평평한 표면에 놓으십시오.
  • Ensure there is adequate clearance (at least 3 feet or 90 cm) from walls, furniture, curtains, and other combustible materials.
  • 히터를 전원 콘센트 바로 아래에 두지 마십시오.
  • The heater is suitable for rooms up to 25 m².
Diagram showing heat distribution from the PELONIS oil-filled radiator in a bedroom, illustrating its ability to heat up to 25 square meters.

Image 4.2: Illustration of the radiator's effective heating area of up to 25m².

5. 사용 설명서

The PELONIS PHOENIX 13M features intuitive dual knob controls for power and thermostat settings.

5.1 Powering On and Setting Heat Level

  1. Ensure the heater is plugged into a suitable 240V power outlet.
  2. Turn the inner regulator knob to select one of the three power settings:
    • 낮음 (1000W)
    • 중간(1500W)
    • 높음 (2500W)
  3. The indicator light will illuminate when the heater is operating.
A hand adjusting the inner knob of the PELONIS oil-filled radiator to select one of three power levels: High, Medium, or Low.

Image 5.1: Adjusting the power settings using the inner control knob.

5.2 온도 조절기 설정

  1. Once a power setting is selected, use the outer regulator knob to set the desired room temperature.
  2. Turn the knob clockwise to increase the temperature setting and counter-clockwise to decrease it.
  3. The heater will cycle on and off to maintain the set temperature, optimizing energy consumption.

5.3 VOLCANO Cross Technology

The integrated VOLCANO Cross Technology, combined with 13 fins, ensures rapid and efficient heat distribution. This technology enhances the heat range by 50%, allowing the room to warm up faster through effective convection currents.

Diagram illustrating the VOLCANO Cross Technology within the PELONIS radiator, showing increased heat coverage and heating efficiency compared to older models.

Image 5.2: Explanation of VOLCANO Cross Technology for enhanced heating performance.

5.4 조용한 작동

Unlike traditional fan heaters, this oil-filled radiator operates without a fan, resulting in very quiet performance. This makes it suitable for use in bedrooms, offices, or any area where minimal noise is desired.

A person sleeping peacefully in a bedroom with the PELONIS oil-filled radiator operating quietly, showing a noise level below 20dB, comparable to a whisper.

Image 5.3: Illustrating the quiet operation of the radiator, ideal for sleeping environments.

6. 유지관리

정기적인 유지관리를 통해 히터의 최적의 성능과 수명을 보장할 수 있습니다.

6.1 청소

  • 청소하기 전에 항상 히터의 플러그를 뽑고 완전히 식히십시오.
  • 부드러운 d로 외부 표면을 닦으십시오.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
  • 내부 구성품에 물이 들어가지 않도록 주의하세요.
  • 히터를 물에 담그지 마십시오.

6.2 보관

  • 히터를 장기간 보관할 경우, 철저히 청소하세요.
  • 히터는 직사광선과 습기를 피해 시원하고 건조한 곳에 보관하세요.
  • 먼지와 손상으로부터 보호하기 위해 히터를 원래 포장 상태로 보관하는 것이 좋습니다.

7. 문제 해결

If you experience issues with your PELONIS PHOENIX 13M radiator, please refer to the following common problems and solutions:

문제가능한 원인해결책
히터가 켜지지 않습니다.
  • 플러그가 꽂혀 있지 않습니다.
  • 전원 콘센트가 작동하지 않습니다.
  • 온도 조절기가 너무 낮게 설정되었습니다.
  • 과열 보호가 활성화되었습니다.
  • 전복 방지 스위치가 작동되었습니다.
  • 전원 코드가 제대로 작동하는 콘센트에 제대로 꽂혀 있는지 확인하세요.
  • 회로 차단기를 확인하거나 다른 콘센트를 사용해 보세요.
  • 온도 조절 장치 설정을 높이세요.
  • Unplug the heater, let it cool for 10-15 minutes, then plug it back in. Ensure no obstructions are blocking airflow.
  • Ensure the heater is on a stable, level surface. If it tipped, place it upright and it should reset.
히터가 효과적으로 가열되지 않습니다.
  • 열 설정이 너무 낮습니다.
  • 객실 크기가 수용 인원을 초과했습니다.
  • 외풍이 심하거나 단열이 제대로 되어 있지 않습니다.
  • Increase the power setting (1000W, 1500W, 2500W).
  • Ensure the heater is used in a room within its recommended size (up to 25 m²).
  • Minimize drafts and improve room insulation if possible.
특이한 냄새.
  • 새 제품 냄새.
  • 먼지가 쌓인다.
  • A slight odor may occur during the first few uses; this is normal and will dissipate.
  • Clean the exterior of the heater as per maintenance instructions.

위 해결 방법을 시도해 보신 후에도 문제가 지속되면 펠로니스 고객 지원팀에 문의하십시오.

8. 사양

특징세부 사항
상표펠로 니스
모델PHOENIX 13M (PHO25A3ABWDE)
전력 출력2500와트
권tage240 볼트
치수(길이 x 너비 x 높이)43 x 12.5 x 54.5cm(16.93 x 4.92 x 21.46인치)
순중량10.6kg(23.3파운드)
재료13 Mechanical Fins, SPCC
열 설정3(1000W, 1500W, 2500W)
특별 기능3D Convection Technology, VOLCANO Technology, Adjustable Thermostat, Overheat Protection, Tip-over Protection, Carry Handle, Mobile Wheels
에너지 효율 등급A to G (as per EU standard)
추천 객실 크기최대 25m²
안전 인증GS인증
Close-up diagram of the PELONIS radiator's internal construction, highlighting high-quality oil, SPCC material, and resistance-welded (ERW) cast parts for durability.

Image 8.1: Details of the radiator's high-quality construction materials.

9. 보증 및 지원

PELONIS offers a 12-month warranty for this product, reflecting our confidence in its quality and durability. For warranty claims, technical support, or any questions not covered in this manual, please contact PELONIS customer service.

Please have your model number (PHOENIX 13M or PHO25A3ABWDE) and purchase information ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.