Feit Electric PL18AB/H/CCT/LED 4-pin Color Selectable PL Lamp 사용 설명서

소개

Welcome to the instruction manual for your Feit Electric PL18AB/H/CCT/LED 4-pin Color Selectable PL Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED lamp. Please read these instructions thoroughly before installation and retain them for future reference.

이 LED lamp is designed to upgrade existing fluorescent fixtures to energy-efficient LED technology. Featuring a 4-pin base, it serves as a horizontal replacement for traditional downlight fluorescents, offering selectable color temperatures of 2700K (Soft White), 3500K (Neutral White), and 4000K (Cool White).

안전 정보

경고: 감전의 위험이 있습니다. Always disconnect power at the circuit breaker or fuse box before attempting any installation, maintenance, or removal of the lamp. Failure to do so may result in serious injury or death.

• 이 lamp is not intended for use with dimmers.
• 이것을 사용하지 마십시오 lamp in emergency exit fixtures or emergency lighting applications.
• Ensure the fixture is compatible with the lamp의 권tage (120-277V) and wattage.
• If rewiring is required for ballast bypass, it must be performed by a qualified electrician in accordance with all applicable electrical codes.
• 제품을 개조하거나 분해하지 마십시오.amp. 내부에는 사용자가 수리할 수 있는 부품이 없습니다.

IMPORTANT NOTE REGARDING BALLAST COMPATIBILITY: The product offers flexible installation options, including direct plug-and-play with an existing ballast or direct wire operation after bypassing the ballast. However, user feedback has indicated potential issues when used with certain ballasts, including a risk of ballast failure. While the manufacturer states dual-mode capability, it is strongly recommended to consult a qualified electrician for installation, especially if choosing the rewiring option to bypass the ballast, or if you are unsure about the compatibility of your existing ballast.

제품 끝view

The Feit Electric PL18AB/H/CCT/LED lamp is an energy-efficient LED replacement for traditional PL fluorescent lamp주요 특징은 다음과 같습니다.

• 4-pin Base: Universal base compatible with multiple fluorescent bases.
• 색상 선택 가능: Choose between 2700K (Soft White), 3500K (Neutral White), and 4000K (Cool White) using an integrated switch.
• 수평 사용: Designed for horizontal installation in downlight fixtures.
• 이중 설치 옵션: Can be used as a plug-and-play replacement with a compatible ballast or direct-wired (ballast bypass).
• 에너지 효율성: Uses 12 watts of power while providing light equivalent to an 18-watt fluorescent lamp.
• 명도: 950 루멘.
• 비조광: 디머 스위치와 호환되지 않습니다.

Image 1: Feit Electric PL18AB/H/CCT/LED Lamp. This image shows the Feit Electric PL18AB/H/CCT/LED lamp, highlighting its elongated form factor, 4-pin base, and the integrated switch for color temperature selection located near the base.

Image 2: Product Packaging and Features. This image displays the product packaging, illustrating key features such as the 4-pin base, 18W equivalent output (uses 12W), suitability for horizontal use, flexible installation (plug-and-play or rewire), and the selectable color temperatures: Soft White (2700K), Neutral White (3500K), and Cool White (4000K). It also indicates a lifespan of up to 15,000 hours and 950 lumens brightness.

설정 및 설치

Always ensure power is disconnected at the circuit breaker before beginning any installation. This lamp 두 가지 설치 방법을 제공합니다.

Method 1: Plug-and-Play (with Existing Ballast)

1. 전원 분리: 회로 차단기를 이용해 조명기구의 전원을 끕니다.
2. 이전 L 제거amp: 기존 형광등을 조심스럽게 제거하세요.amp 고정 장치에서.
3. Check Ballast Compatibility: Ensure your existing ballast is compatible with LED PL lamps. Refer to the ballast manufacturer's specifications if unsure.
4. LED L 설치amp: Insert the Feit Electric PL18AB/H/CCT/LED lamp into the fixture's 4-pin socket, ensuring it is securely seated.
5. 복원력 : 회로 차단기의 전원을 다시 켜십시오.

Method 2: Direct Wire (Ballast Bypass)

WARNING: This method requires electrical wiring knowledge. If you are not comfortable with electrical work, consult a qualified electrician. Improper wiring can lead to electric shock, fire, or damage to the lamp 그리고 고정물.

1. 전원 분리: 회로 차단기를 이용해 조명기구의 전원을 끕니다.
2. 이전 L 제거amp 그리고 평형추: 기존 형광등을 조심스럽게 제거하세요.amp. Then, locate and remove the existing ballast from the fixture.
3. 조명기구 재배선: Bypass the ballast by directly connecting the fixture's lamp holder to the main power supply (120-277V). Ensure proper polarity (line and neutral) is maintained according to electrical codes. All unused wires should be capped.
4. LED L 설치amp: Insert the Feit Electric PL18AB/H/CCT/LED lamp into the rewired fixture's 4-pin socket, ensuring it is securely seated.
5. 복원력 : 회로 차단기의 전원을 다시 켜십시오.

작동 지침

The Feit Electric PL18AB/H/CCT/LED lamp features an integrated switch for selecting your preferred color temperature.

1. 스위치 찾기: The color selection switch is located on the base of the lamp.
2. 색온도 선택: Before or after installation (if the switch is accessible), slide the switch to choose one of the three available color temperatures:
   • 2700K: 부드러운 흰색 (따뜻하고 편안한 빛)
   • 3500K: 뉴트럴 화이트(균형 잡힌 자연광)
   • 4000K: Cool White (bright, crisp light)
3. 전원 켜기: 일단 내가amp is installed and the desired color temperature is selected, restore power to the fixture. The lamp will illuminate at the chosen setting.

참고: 이 lamp is non-dimmable. Do not attempt to use it with dimmer switches.

유지

Your Feit Electric LED lamp 최소한의 유지보수만 필요합니다.

• 청소: Ensure power is disconnected before cleaning. Clean the lamp with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these may damage the lamp마감이나 내부 구성 요소.
• 사용자가 수리할 수 없는 부품: 난amp contains no user-serviceable parts. Do not attempt to open or repair the lamp 당신 자신.

문제 해결

If you encounter issues with your Feit Electric PL18AB/H/CCT/LED lamp, please refer to the following troubleshooting steps:

• Lamp Does Not Illuminate:
  • Verify that power is supplied to the fixture. Check the circuit breaker.
  • l을 확인하세요amp is correctly and securely seated in the 4-pin socket.
  • If using the plug-and-play method, confirm the existing ballast is functional and compatible. A failing ballast may prevent the lamp 조명에서.
  • If using the direct wire method, verify all wiring connections are secure and correct.
  • Check the position of the color selection switch on the lamp.
• Lamp 깜빡임:
  • For plug-and-play installations, flickering may indicate an incompatible or failing ballast. Consider bypassing the ballast (professional installation recommended) or replacing the ballast.
  • For direct wire installations, check for loose wiring connections or improper voltage.
• 색온도가 잘못되었습니다:
  • Ensure the color selection switch on the lamp is set to your desired position.

If these steps do not resolve the issue, please contact customer support or consult a qualified electrician.

명세서

보증 및 지원

For detailed warranty information, please refer to the original product packaging or visit the official Feit Electric website. For technical support or further assistance with your Feit Electric PL18AB/H/CCT/LED lamp, you may also visit the Feit Electric Store on Amazon.