Dynaudio Emit 25C Center Channel Speaker User Manual

1. 서론

The Dynaudio Emit 25C is a dedicated center channel speaker designed for multi-channel home theater systems. It plays a crucial role in delivering clear dialogue and central audio elements, ensuring an immersive listening experience. The Emit 25C integrates seamlessly with other Emit series speakers, providing consistent sound quality across your setup.

This speaker features Dynaudio's proprietary Magnesium Silicate Polymer (MSP) woofers and a high-quality soft-dome tweeter, engineered for precise sound reproduction and dynamic performance. This manual provides essential information for the proper setup, operation, and maintenance of your Emit 25C speaker.

앞쪽 view of the Dynaudio Emit 25C Center Channel Speaker, showcasing the two Magnesium Silicate Polymer (MSP) woofers flanking the soft-dome tweeter.

2. 안전 정보

• 스피커를 작동하기 전에 모든 지침을 읽으십시오.
• 스피커를 물, 습기 또는 극한 온도에 노출시키지 마세요.
• 스피커 과열을 방지하기 위해 스피커 주변에 적절한 환기가 이루어지도록 하십시오.
• 적절한 굵기와 품질의 스피커 케이블만 사용하십시오.
• Do not attempt to open or service the speaker yourself. Refer all servicing to qualified personnel.
• 스피커를 강한 자기장에서 멀리 두세요.

3. 상자 안에 무엇이 들어있나요?

Upon unpacking your Dynaudio Emit 25C, please verify that all components are present:

• 1 x Dynaudio Emit 25C Center Channel Speaker
• 문서 (사용자 설명서, 보증 정보)

누락되거나 손상된 품목이 있는 경우 즉시 판매점에 문의하십시오.

4. 설정

4.1 스피커 배치

Optimal placement of the center channel speaker is crucial for clear dialogue and a cohesive soundstage. Position the Emit 25C directly above or below your television or projection screen, centered horizontally with your main left and right speakers. Ensure the speaker is at or near ear level when seated in your primary listening position.

Maintain a clear line of sight between the speaker and the listening area, avoiding obstructions. The Emit 25C includes magnetically attached black front grilles, which can be used for aesthetic preference or removed for a more open sound. Foam plugs are also provided to adjust the bass performance to best suit its position in your room, especially if placed close to a wall or in a cabinet.

앞쪽 view of the Dynaudio Emit 25C Center Channel Speaker with its magnetically attached black fabric grille in place.

4.2 연결

Connect the Emit 25C to the center channel output of your AV receiver or amplifier using high-quality speaker cables. Ensure correct polarity: connect the positive (+) terminal on the speaker (usually red) to the positive (+) terminal on your amplifier, and the negative (-) terminal on the speaker (usually black) to the negative (-) terminal on your amplifier. Incorrect polarity can result in poor sound quality and phase issues.

Strip approximately 1/2 inch (12mm) of insulation from the ends of your speaker wires. Twist the bare wire strands tightly. Unscrew the binding post caps on the speaker and amplifier, insert the bare wire into the hole, and tighten the caps securely to ensure a firm connection. Avoid stray wire strands that could short-circuit the amp리퍼.

뒤쪽 view of the Dynaudio Emit 25C Center Channel Speaker, showing the bass reflex port and the high-quality binding posts for speaker cable connection.

5. 운영

Once connected, your Dynaudio Emit 25C speaker is ready for operation. Power on your AV receiver or amplifier and select the appropriate input source. Adjust the volume to a comfortable listening level. For optimal performance, refer to your AV receiver's manual for speaker calibration settings, including speaker size (typically 'Small' for center channels with a subwoofer, or 'Large' if running full-range without a subwoofer), crossover frequency, and channel levels.

Allow a break-in period for new speakers. The drivers will perform optimally after several hours of use.

6. 유지관리

To maintain the appearance and performance of your Dynaudio Emit 25C speaker, follow these simple guidelines:

• 청소: Dust the cabinet and grille with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
• 그릴 관리: If the grille becomes dusty, gently vacuum it with a soft brush attachment.
• 운전자 관리: Avoid touching the speaker drivers (woofers and tweeter) as this can cause damage.
• 놓기: 스피커 위에 무거운 물건을 올려놓지 마세요.

7. 문제 해결

If you encounter issues with your Emit 25C speaker, refer to the following common troubleshooting steps:

• 소리 없음:
  • 스피커와 앰프 양쪽의 모든 스피커 케이블 연결 상태를 확인하십시오. amplifier/receiver. Ensure they are secure and correctly polarized (+ to + and - to -).
  • 귀하의 것을 확인하십시오 amp수신기의 전원이 켜져 있고 올바른 입력 소스가 선택되어 있습니다.
  • Ensure the center channel output is enabled and not muted in your amplifier/receiver's settings.
• 왜곡된 소리:
  • 볼륨 레벨을 줄이세요 amplifier/receiver. Distortion often occurs when the amp리파이어가 오버드라이브되었습니다.
  • 스피커 케이블 연결부에 느슨한 가닥이나 단락이 있는지 확인하십시오.
  • Ensure the source audio is not distorted. Try a different audio source.
  • Verify that the speaker impedance settings on your amplifier/receiver match the speaker's specifications (if applicable).
• 불균형한 소리:
  • Check the balance and channel level settings on your amp리시버/리시버.
  • 청취 위치를 기준으로 스피커 배치가 대칭인지 확인하십시오.

If these steps do not resolve the issue, please contact Dynaudio customer support or your authorized dealer for further assistance.

8. 사양

9. 보증 및 지원

Your Dynaudio Emit 25C Center Channel Speaker is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or warranty claims, please contact your authorized Dynaudio dealer or visit the official Dynaudio web고객 서비스 연락처 정보를 제공하는 사이트입니다.

보증을 위해 구매 증빙서류를 보관하세요.