FallTech 8144QCSM

FallTech FT 철골 작업자 안전벨트 사용 설명서

Model: 8144QCSM

소개

This manual provides essential information for the proper use, care, and maintenance of the FallTech FT Iron Worker Body Harness. This harness is designed for fall protection in various industrial and construction environments, specifically tailored for ironwork. Adherence to these instructions is crucial for user safety and product longevity. Always inspect the harness before each use.

안전 정보

경고: 이 지침을 따르지 않으면 심각한 부상이나 사망을 초래할 수 있습니다.

Always inspect the harness for damage, wear, or defects before each use.
Ensure all buckles and adjusters are securely fastened and properly adjusted.
The harness must be used as part of a complete personal fall arrest system.
Do not modify the harness in any way.
Consult a qualified person for training on proper fall protection procedures.
Maximum weight capacity for this harness is 425 lbs (including tools and clothing).

구성 요소 이상view

The FallTech FT Iron Worker Body Harness features several key components designed for comfort and safety.

FallTech FT Iron Worker Body Harness - Full View

그림 1: 전체 View of the FallTech FT Iron Worker Body Harness. This image displays the complete harness, highlighting its various straps, buckles, and D-rings from a side perspective.

FallTech FT Iron Worker Body Harness - Front View

그림 2: 전면 View of the FallTech FT Iron Worker Body Harness. This image shows the front of the harness, including the chest strap, shoulder padding, and waist belt with quick-connect buckles.

FallTech FT Iron Worker Body Harness - Back View

그림 3: 뒤로 View of the FallTech FT Iron Worker Body Harness. This image illustrates the back of the harness, featuring the dorsal D-ring, shoulder straps, and back padding.

등쪽 D-링: Located on the back, used as the primary attachment point for fall arrest.
측면 D-링: Located on the hips, used for work positioning or restraint.
어깨 끈: Adjustable straps that go over the shoulders, often padded for comfort.
가슴 스트랩 : Secures the shoulder straps across the chest, typically with a quick-connect buckle.
다리 끈: Adjustable straps that go around the legs, usually with quick-connect buckles.
허리띠: Provides support and attachment points for tools, with a belt buckle.
Torso Adjusters: Mechanisms for adjusting the fit of the harness vertically.

Setup and Donning

Follow these steps to properly don and adjust your FallTech FT Iron Worker Body Harness:

Inspect the Harness: Before each use, visually inspect the entire harness for cuts, fraying, broken stitches, heat damage, chemical damage, or any other signs of wear or damage. Ensure all buckles and D-rings are free of deformation or corrosion.
Hold by Dorsal D-Ring: Hold the harness by the dorsal D-ring (back D-ring) to allow the straps to fall into place.
Don Shoulder Straps: Slip the shoulder straps over your shoulders, as if putting on a vest. Ensure the dorsal D-ring is centered on your back, between your shoulder blades.
Connect Leg Straps: Bring the leg straps between your legs and connect them to the corresponding buckles on the waist belt or main harness body. Ensure the straps are not twisted.
Connect Chest Strap: Fasten the chest strap across your chest. Adjust its position so it is approximately mid-chest level.
Adjust Leg Straps: Tighten the leg straps so they are snug but allow for full range of motion. You should be able to slide your flat hand between the strap and your leg.
어깨 끈 조정: Pull the shoulder strap adjusters to remove any slack. The harness should fit snugly without restricting movement.
Adjust Torso/Waist Belt: Adjust the torso straps and waist belt to ensure a snug fit around your waist and hips. The waist belt should sit comfortably and securely.
최종 확인: Perform a final visual check to ensure all straps are flat, not twisted, and all buckles are securely fastened. The harness should fit snugly, allowing for comfortable movement without excessive slack.

작동 및 사용

The FallTech FT Iron Worker Body Harness is designed for fall arrest, work positioning, and restraint applications. Always connect to an approved anchorage point and compatible connecting device.

가을 체포: Connect a compatible lanyard or self-retracting lifeline to the dorsal D-ring. Ensure the anchorage point is capable of supporting 5,000 lbs (22.2 kN) per worker or meets OSHA/ANSI requirements.
작업 위치: Use the side D-rings for work positioning. These are designed to support a worker in a suspended position, allowing hands-free operation. Always use a separate fall arrest system when using work positioning.
제지: The side D-rings can also be used for restraint, preventing a worker from reaching a fall hazard.
Tool Attachment: The waist belt is designed to accommodate tool bags and other accessories. Ensure that the combined weight of tools and the user does not exceed the harness's maximum weight capacity.
Post-Fall Procedure: In the event of a fall, immediately remove the harness from service. Do not use it again. The harness must be inspected by a competent person or destroyed. Seek medical attention if necessary.

유지

Proper maintenance extends the life of your harness and ensures its continued safety.

청소

손세탁만 가능합니다.
Use a mild soap or detergent and lukewarm water.
Scrub the harness with a stiff brush to remove dirt and grime.
비누 잔여물이 완전히 제거될 때까지 깨끗한 물로 충분히 헹궈주세요.
Hang to air dry in a clean, shaded area away from direct sunlight, heat, or open flame. Do not machine wash or dry.

점검

매번 사용하기 전에: Perform a visual inspection as described in the

관련 문서 - 8144QCSM

	낙하 방지 하네스 사이즈 가이드 \| FallTech FallTech의 종합적인 사이즈 가이드로 나에게 딱 맞는 낙하 방지 하네스를 찾아보세요. 최적의 안전과 편안함을 위해 가슴, 허리, 허벅지를 측정하는 방법을 알아보세요.
	FallTech Full Body Harness User Instruction Manual (MFBH04) Comprehensive user instruction manual for FallTech Full Body Harnesses, covering installation, inspection, maintenance, and safety guidelines for fall protection systems.
	FallTech 풀바디 하네스 사용 설명서 - MFBH04 FallTech 전신 하네스(모델 MFBH04)에 대한 종합적인 사용 설명서입니다. 추락 방지를 위한 안전 경고, 설명, 적용, 시스템 요구 사항, 설치, 사용, 유지보수, 검사 및 정의를 다룹니다.
	FallTech Full Body Harness User Instruction Manual Comprehensive user instruction manual for FallTech Full Body Harnesses. Includes safety warnings, installation, inspection, maintenance, and compliance details for ANSI, CSA, and OSHA standards.
	FallTech Full Body Harness User Instruction Manual Comprehensive user instruction manual for FallTech Full Body Harnesses. Includes safety warnings, installation, donning, inspection, and maintenance procedures for fall protection systems.
	FallTech 9000FW User Kit Specification Sheet Technical specifications and features for the FallTech 9000FW User Kit, including the 7016 Harness and 8256 ViewPack Lanyard. Fall protection equipment details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.