옐로우 재킷 63329

Yellow Jacket 63329 Crossbar Assembly Instruction Manual

Model: 63329 | For 3/4" to 7/8" (19-22 mm) Tube

1. 서론

This manual provides essential instructions for the safe and effective use of the Yellow Jacket 63329 Crossbar Assembly. Please read this manual thoroughly before installation and operation to ensure proper function and to prevent damage or injury.

2. 안전 정보

경고: 이 안전 지침을 따르지 않을 경우 부상이나 장비 손상이 발생할 수 있습니다.

  • Always wear appropriate personal protective equipment (PPE) such as safety glasses and gloves when handling tools and working with tubing.
  • Ensure the crossbar assembly is correctly seated and secured before applying force.
  • Do not modify the crossbar assembly. Use only genuine Yellow Jacket replacement parts if necessary.
  • 어린이와 허가받지 않은 사람을 작업 구역에 접근시키지 마십시오.

3. 제품 오버view

The Yellow Jacket 63329 Crossbar Assembly is designed for use with specific flaring tools to create precise flares on 3/4" to 7/8" (19-22 mm) tubing. It features a robust construction for durability and reliable performance.

Yellow Jacket 63329 Crossbar Assembly

Figure 1: Yellow Jacket 63329 Crossbar Assembly. This image shows the metal crossbar with two black clamping mechanisms at each end, secured by hex bolts. A blue label on the bar indicates "CAUTION: THIS SIDE UP" and specifies tube sizes "3/4" - 7/8" (19-22 mm tube)".

4. 설정 및 설치

  1. 튜브를 준비하세요: Ensure the end of the tubing to be flared is cut squarely and deburred. Clean any debris from the tubing.
  2. Select Correct Die Block: Identify the appropriate die block for the 3/4" or 7/8" tubing size (not included with crossbar assembly).
  3. 튜브를 삽입하세요: Place the tubing into the selected opening of the die block, ensuring it extends slightly above the surface according to the flaring tool's instructions.
  4. Position Crossbar: Attach the Yellow Jacket 63329 Crossbar Assembly to the die block. Ensure the side labeled "CAUTION: THIS SIDE UP" is facing upwards. The clamping mechanisms on the crossbar should securely hold the die block.
  5. 안전한 조립: Tighten the bolts on the crossbar assembly to firmly clamp the die block and tubing in place. Do not overtighten, as this can damage the tubing or the tool.

5. 사용 설명서

Once the crossbar assembly and tubing are securely installed in the flaring tool:

  1. Align Flaring Cone: Position the flaring cone of your flaring tool directly over the end of the tubing.
  2. Begin Flaring: Slowly turn the feed screw of the flaring tool, applying steady pressure to form the flare.
  3. Monitor Flare Formation: Continue turning until the flare is fully formed and makes contact with the flaring cone. Avoid excessive force, which can thin or crack the flare.
  4. Retract Cone: Reverse the feed screw to retract the flaring cone.
  5. Remove Tubing: Loosen the crossbar assembly bolts and carefully remove the flared tubing.
  6. Inspect Flare: Visually inspect the flare for uniformity, cracks, or imperfections. A properly formed flare is crucial for a leak-free connection.

6. 유지관리

  • 청소: After each use, wipe down the crossbar assembly with a clean, dry cloth to remove any dirt or debris.
  • 저장: Store the crossbar assembly in a dry place, away from corrosive materials and extreme temperatures.
  • 점검: Periodically inspect the bolts and clamping mechanisms for wear or damage. Replace any worn or damaged components with genuine Yellow Jacket parts.
  • 매끄럽게 하기: Lightly lubricate the threads of the clamping bolts with a suitable lubricant if they become stiff.

7. 문제 해결

문제가능한 원인해결책
Uneven or cracked flareTubing not deburred; tubing not extending correctly; excessive force; worn flaring cone.Ensure tubing is deburred and positioned correctly. Apply steady, even pressure. Inspect flaring cone for damage.
Tubing slips during flaringCrossbar bolts not tightened sufficiently; incorrect die block size.Ensure crossbar bolts are securely tightened. Verify correct die block for tubing size.
Difficulty tightening boltsDirty or corroded threads; overtightening in the past.Clean threads and apply light lubricant. Do not overtighten.

8. 사양

  • 모델: 옐로우 재킷 63329
  • Compatible Tube Sizes: 3/4" to 7/8" (19-22 mm)
  • 재료: 내구성 있는 금속 구조
  • 대략적인 패키지 크기: 1.3 x 1.1 x 0.7 인치
  • 대략적인 패키지 무게: 1 파운드

9. 보증 및 지원

For warranty information or technical support regarding your Yellow Jacket 63329 Crossbar Assembly, please refer to the official Yellow Jacket web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.

Yellow Jacket Official Web대지: www.yellowjacket.com

© 2023 옐로우 재킷. 모든 권리 보유.