Westclox Tilt & Swivel Digital Alarm Clock Instruction Manual

소개

Thank you for choosing the Westclox Tilt & Swivel Digital Alarm Clock. This manual provides detailed instructions for the setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

주요 특징

• 디지털 디스플레이: Features a large 1.8" LED digital display for easy reading.
• Tilt & Swivel Design: Unique tilt and swivel stand allows flexible positioning for optimal view주고받음.
• 특대 사이즈: Measures 11" wide x 5" high x 5" deep for amp르 디스플레이 공간.
• Quiet Alarm: Uses a loud, clear alarm sound.
• 내구성 있는 구조: Made from sturdy ABS plastic with a powder-coated finish.

Image: The Westclox Tilt & Swivel Digital Alarm Clock, highlighting its large display and adjustable stand.

설정

시계에 전원을 공급하세요

The Westclox Digital Alarm Clock operates primarily via AC power. Connect the provided power adapter to the clock's power input port and then plug it into a standard electrical outlet. The display will illuminate, indicating power is supplied.

배터리 백업 설치

외출 중 백업 전원용tages, install 2 AAA batteries (not included) into the battery compartment located on the bottom of the clock. Ensure correct polarity (+/-) as indicated inside the compartment. The battery backup maintains time and alarm settings but does not power the display.

초기 시간 설정

Upon first power-up or after a prolonged power loss without battery backup, the display may show a default time. Refer to the 'Setting the Time' section under Operating Instructions to set the current time.

작동 지침

시간 설정

1. 를 누르고 계세요 시간 설정 button (usually located on the back or top of the clock) until the hour digits begin to flash.
2. 를 누르세요 시간 button repeatedly to adjust the hour. Pay attention to the PM indicator if using a 12-hour format.
3. 를 누르세요 분 분을 조정하려면 버튼을 반복해서 누르세요.
4. 를 누르세요 시간 설정 버튼을 다시 누르면 시간이 확정되고 시간 설정 모드가 종료됩니다.

Setting Alarms (AL.1 and AL.2)

This clock features two independent alarms, AL.1 and AL.2.

1. 를 누르고 계세요 AL.1 세트 or AL.2 세트 알람 시간 숫자가 깜빡일 때까지 버튼을 누르세요.
2. 를 누르세요 시간 button to adjust the alarm hour. Observe the PM indicator.
3. 를 누르세요 분 버튼을 눌러 알람 분을 조정하세요.
4. 해당되는 것을 누르세요 AL.1 세트 or AL.2 세트 알람 시간을 확인하려면 버튼을 다시 누르세요.
5. To activate or deactivate an alarm, locate the AL.1 켜짐/꺼짐 or AL.2 켜짐/꺼짐 switch/button. Slide the switch to 'ON' or press the button to toggle the alarm. An indicator light (e.g., AL.1 or AL.2) will appear on the display when the alarm is active.

스누즈 기능

Image: The top of the Westclox Digital Alarm Clock showing the prominent snooze/dimmer button.

알람이 울리면 큰 버튼을 누르세요 스누즈/디머 button located on the top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes. To turn off the alarm completely, press the corresponding AL.1 켜짐/꺼짐 or AL.2 켜짐/꺼짐 버튼/스위치.

디스플레이 디머

그만큼 스누즈/디머 button also controls the brightness of the LED display. Press this button (without an active alarm) to cycle through different brightness levels (e.g., High, Medium, Low, Off). Select the desired brightness for your environment.

Tilt and Swivel Feature

The clock is designed with a unique base that allows the display to be tilted vertically and swiveled horizontally. Gently adjust the clock face to your preferred viewing angle for optimal readability from any position in the room.

유지

To ensure the longevity and optimal performance of your Westclox Digital Alarm Clock, follow these simple maintenance guidelines:

• 청소: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or electronic components.
• 놓기: Place the clock on a stable, flat surface. Avoid areas with extreme temperatures, direct sunlight, high humidity, or strong vibrations.
• 배터리 교체: Replace the AAA backup batteries annually or when the clock experiences frequent power outages to ensure settings are retained.

문제 해결

명세서

보증 및 지원

For warranty information or technical support, please refer to the packaging or contact Westclox customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.