EverBrite 3팩 무선 LED 퍽 라이트 (12가지 RGB 색상 및 리모컨 포함) 사용 설명서

1. 서론

This manual provides detailed instructions for the EverBrite 3-Pack Wireless LED Puck Lights. These versatile lights offer 12 RGB color options, remote and touch control, and timing functions, making them suitable for various indoor lighting needs.

2. 포함 사항

• 3 x EverBrite Wireless LED Puck Lights
• 1 x 원격 제어
• 9 x AAA Batteries (3 per light)
• 3 x Double-Sided Adhesive Tapes

Image: Contents of the EverBrite 3-Pack Wireless LED Puck Lights package, including three puck lights, a remote control, nine AAA batteries, and three adhesive tapes.

3. 설정 및 설치

3.1. 배터리 설치

1. Gently twist the back cover of each puck light counter-clockwise to open the battery compartment.
2. 각 전등에 AAA 배터리 3개를 넣을 때, 극성(+/-)을 정확히 확인하십시오.
3. Replace the back cover by aligning the notches and twisting clockwise until secure.

Image: Step-by-step illustration of opening the battery cover and inserting AAA batteries into the puck light.

3.2. 조명 설치

1. Clean the surface where you intend to mount the light. Ensure it is dry and free of dust.
2. Peel off one side of the double-sided adhesive tape and apply it firmly to the back of the puck light.
3. Peel off the other side of the adhesive tape and press the light firmly onto the desired surface for at least 30 seconds.

Image: Illustration showing the application of double-sided adhesive tape to the back of the puck light for mounting.

4. 사용 설명서

4.1. 터치 컨트롤

Press the center of the light to turn it ON/OFF. Repeated presses will cycle through preset colors (White, Red, Green, Blue) and then OFF.

Image: Demonstrates the touch control feature of the puck light, cycling through white, red, green, and blue colors.

4.2. 원격 제어

The included remote control allows for comprehensive management of the puck lights from up to 20 feet away. Point the remote directly at the lights for optimal response.

이미지: 자세한 view of the remote control, highlighting buttons for ON/OFF, color selection, brightness adjustment, and timing functions.

• 켜기/끄기: Press the "ON" button to turn on all connected lights. Press "OFF" to turn them off.
• 색상 선택: Choose from 12 RGB colors using the color palette buttons.
• 백색광: Press the "W" button for a pure white light.
• 밝기 조정: 밝기 높이기/낮추기 버튼을 사용하여 조명 강도를 높이거나 낮춥니다.
• 플래시 모드 : Press "FLASH" to activate a mode where 7 colors flash gradually.
• 페이드 모드: Press "FADE" to activate a mode where 7 colors dimmable gradually.
• 타이머 기능: Set the lights to automatically turn off after 30 minutes ("30 min") or 60 minutes ("60 min").

5. 유지관리

5.1. 배터리 교체

When the lights dim or stop responding, it's time to replace the AAA batteries. Follow the battery installation steps in Section 3.1. For optimal performance, replace all three batteries in a puck light at the same time.

5.2. 청소

Wipe the lights with a soft, dry cloth. Do not use abrasive cleaners or immerse the lights in water.

6. 문제 해결

• 불이 켜지지 않음: Ensure batteries are correctly installed and not depleted. Check if the remote control battery is functional.
• 리모컨이 응답하지 않음: Point the remote directly at the lights. Ensure there are no obstructions. Replace the remote's battery if necessary.
• Lights falling off: Ensure the mounting surface is clean and dry before applying adhesive. For heavy-duty applications or rough surfaces, consider additional mounting solutions.
• 짧은 배터리 수명: Continuous use of color-changing modes (Flash/Fade) or high brightness settings can deplete batteries faster. Using timer functions can help conserve battery life.

7. 사양

8. 보증 및 지원

For warranty information or technical support, please refer to the product packaging or contact EverBrite customer service directly. Contact details are typically available on the manufacturer's web사이트나 소매업체를 통해 구매하세요.