1. 서론
Thank you for choosing the FORGING MOUNT Full Motion TV Wall Mount. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed to securely hold most 32-75 inch flat screen, LED, and 4K TVs, with a maximum weight capacity of 132 lbs (60 kg) and VESA compatibility up to 600x400mm. It is suitable for installation on 8", 12", and 16" wood studs, as well as concrete and brick walls.
2. 안전 정보
경고: 본 설명서의 모든 지침, 경고 및 주의 사항을 읽고 따르지 않을 경우 심각한 부상, 재산 피해 또는 보증 무효화가 발생할 수 있습니다.
- 본 설치 안내서에 포함된 모든 지침과 경고 사항을 읽고 이해하기 전까지는 설치를 시작하지 마십시오. 지침이나 경고 사항에 대해 궁금한 점이 있으면 가까운 대리점에 문의하십시오.
- This mounting bracket is designed to be installed on wood stud walls, solid concrete walls, or brick walls. Do not install on drywall alone.
- The wall must be capable of supporting five times the weight of the TV and the mount combined.
- 목재 스터드를 정확하게 찾으려면 항상 스터드 파인더를 사용하십시오.
- Ensure all screws are tightened securely, but do not overtighten. Overtightening can damage the screws and reduce their holding capacity.
- 최대 적재 용량인 132kg을 절대 초과하지 마십시오.
- 이 제품에는 삼키면 질식 위험이 있는 작은 품목이 들어 있습니다. 이 품목은 어린이의 손이 닿지 않는 곳에 보관하세요.
- Always use two people for installation and lifting the TV.
3. 패키지 내용
Please verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not attempt to install. Contact customer support for replacement parts.


패키지에는 일반적으로 다음이 포함됩니다.
- 관절형 암이 있는 벽판 조립체
- TV 브래킷 (2개)
- Hardware Kit (various screws, washers, spacers, concrete anchors)
- 버블 레벨
- 케이블 타이
4. 설정 및 설치
4.1 설치 전 확인 사항
Before mounting, ensure your TV and wall are compatible with the mount.

- TV 크기 : 이 거치대는 32인치에서 75인치 사이의 TV에 적합합니다.
- TV 무게: TV 무게가 60kg(132파운드)을 넘지 않는지 확인하십시오.
- 베사 패턴: Check the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between them. This mount supports VESA patterns from 100x100mm up to 600x400mm.
- 케이블 콘센트: Verify that the TV brackets will not block any cable outlets on the back of your TV.
- 벽 유형: This mount is designed for installation on wood studs (8", 12", 16" spacing), solid concrete, or brick walls. 석고보드에만 부착하지 마십시오.
4.2 설치 단계
안전한 설치를 위해 다음 단계를 주의 깊게 따르십시오. 이 과정에는 두 사람이 함께 작업하는 것을 강력히 권장합니다.



- 드릴링 위치 표시: Determine the desired height for your TV. Use the wall plate as a template to mark the drilling points on your wall. For wood studs, use a stud finder to locate the center of the studs and mark the holes accordingly. For concrete/brick walls, ensure the marked points are level.
- 드릴 파일럿 홀: For wood studs, drill pilot holes using a 7/32" (5.5mm) drill bit. For concrete/brick walls, use a 3/8" (10mm) masonry drill bit and insert the concrete anchors flush with the wall surface.
- 벽면 플레이트 부착: Secure the wall plate to the wall using the lag bolts (for wood studs) or concrete anchors and lag bolts (for concrete/brick walls). Ensure the wall plate is level using the included bubble level.
- TV 브래킷을 TV에 부착하세요: Carefully place your TV face down on a soft, clean surface. Attach the two vertical TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
- 벽걸이형 TV 거치대: With the help of another person, carefully lift the TV and hook the TV brackets onto the wall plate. Ensure the brackets are properly seated on the wall plate's hooks.
- TV를 안전하게 설치하세요: Locate the security screws or locking mechanisms on the bottom of the TV brackets. Tighten these screws to secure the TV to the wall mount, preventing accidental dislodgement.
5. 사용 설명서
The FORGING MOUNT Full Motion TV Wall Mount offers various adjustments for optimal view경험.


- 확장/수축: The mount features articulating arms that allow the TV to extend up to 15.2 inches (38.6 cm) from the wall and retract to a minimum distance of 2.8 inches (7.1 cm) to save space. Gently pull or push the TV to achieve the desired distance.
- 회전 조정: The TV can be swiveled up to 60 degrees left or right. Carefully rotate the TV horizontally to adjust the view잉 각도.
- 기울기 조정: The mount allows for a tilt range of +5 degrees (upward) to -10 degrees (downward). Loosen the tilt adjustment knobs on the TV brackets, adjust the screen to the desired vertical angle, and then re-tighten the knobs to secure the position.
- 레벨 조정 : After installation, if the TV is not perfectly level, you can make a fine-tune adjustment of +/- 3 degrees. This feature allows for minor rotational adjustments to ensure the TV is perfectly horizontal.
6. 유지관리
정기적인 유지 관리는 TV 벽걸이 거치대의 수명 연장과 안전한 작동을 보장합니다.
- 정기 점검: Periodically check that all screws and connections are secure. If any screws feel loose, tighten them carefully without overtightening.
- 청소: 부드럽고 마른 천으로 마운트를 닦으십시오. 연마성 세척제나 용제를 사용하면 마감이 손상될 수 있으므로 사용하지 마십시오.
- 매끄럽게 하기: 관절 부분은 부드러운 움직임을 위해 설계되었으며 일반적으로 윤활유가 필요하지 않습니다. 움직임이 뻑뻑해지면 고객 지원팀에 문의하여 도움을 받으십시오.
7. 문제 해결
If you encounter any issues during or after installation, refer to the following common problems and solutions.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 설치 후 TV가 수평이 아닙니다. | 약간의 회전 정렬 불량. | Use the built-in level adjustment feature (+/- 3 degrees) to fine-tune the TV's horizontal position. |
| 마운트가 불안정하거나 흔들리는 느낌이 듭니다. | Screws not fully tightened; incorrect wall type; mount overloaded. | Ensure all wall plate and TV bracket screws are securely tightened. Verify the mount is installed on a compatible wall type (wood stud, concrete, brick). Check TV weight against maximum capacity (132 lbs). |
| TV가 거치대에 맞지 않습니다. | VESA 패턴이 잘못되었거나 TV 크기/무게가 맞지 않습니다. | Verify your TV's VESA pattern is within 100x100mm to 600x400mm. Confirm TV size is between 32-75 inches and weight is under 132 lbs. |
| 기울기 또는 회전 조절에 어려움이 있습니다. | Tilt knobs are too tight; joints are stiff. | Loosen the tilt adjustment knobs before attempting to tilt. For stiff joints, ensure no cables are obstructing movement. If issues persist, contact customer support. |
If the problem persists or is not listed here, please contact FORGING MOUNT customer support for further assistance.
8. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 단조 마운트 |
| 모델 번호 | HY9301-B-NEW |
| 재료 | 합금강 |
| TV 크기 호환성 | 32~75인치 |
| 최대 중량 용량 | 132파운드(60kg) |
| VESA 호환성 | 100x100mm ~ 600x400mm |
| 기울기 각도 | +5° ~ -10° |
| 회전 각도 | ±60° |
| 레벨 조정 | ±3° |
| 벽에서 연장된 부분 | 2.8인치(수축 시)에서 15.2인치(확장 시)까지 |
| 벽 호환성 | Wood Studs (8", 12", 16" spacing), Solid Concrete, Brick |
| 제품 치수 | 16 x 16 x 15 inches (approximate, when folded) |
| 품목 무게 | 11파운드 |
| 한국어: | 746608619496 |
9. 보증 및 지원
FORGING MOUNT is committed to providing high-quality products and excellent customer service. While specific warranty terms may vary by region and retailer, we stand behind the quality of our products.
- 고객 지원: For any questions, missing parts, or technical assistance, please contact FORGING MOUNT customer support. Refer to the product packaging or the FORGING MOUNT official web연락처 정보 사이트.
- 보호 계획: Extended protection plans may be available for purchase through your retailer to provide additional coverage beyond the standard warranty.