1. 서론
The TELEVES Avant X Basic is a programmable multi-input headend designed for terrestrial TV installations, suitable for single or multi-dwelling units. It features 32 programmable digital filters across 4 VHF+UHF (DTT) inputs. The unit has 5 inputs, configurable for two distribution modes: FM-4xVHF/UHF or FM-DAB-3xUHF. It allows for precise adjustment of amplification and equalization for various RF inputs. Programming is simplified via the ASuite application (Android or Windows). The device includes automatic LTE filtering, detecting and cutting frequencies from channel 48 (LTE700). It is RED compliant.
2. 안전 정보
- 설치 및 작동 전에 모든 지침을 주의 깊게 읽으십시오.
- 기기를 비, 습기 또는 극한의 온도에 노출시키지 마세요.
- 과열을 방지하려면 적절한 환기를 유지하세요.
- Only use the provided power supply or a compatible alternative specified by TELEVES.
- 연결이나 유지관리를 하기 전에 전원을 차단하세요.
- Installation should be performed by qualified personnel to ensure safety and optimal performance.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- TELEVES Avant X Basic Programmable Headend Unit (Model 532103)
- 전원 케이블
- 사용 설명서(본 문서)
- 장착 액세서리(해당되는 경우)
4. 제품 오버view
그림 1: 앞쪽 view of the TELEVES Avant X Basic Programmable Headend. This image displays the unit's casing, indicating the various input and output connectors for signal management.
주요 특징:
- 5 Inputs: Configurable for FM-4xVHF/UHF or FM-DAB-3xUHF distribution modes.
- 32 Digital Filters: Programmable for precise signal selection and amp합리화.
- Automatic Gain Control (AGC): Ensures stable output levels.
- LTE Filtering: Automatic detection and suppression of LTE700 (Channel 48) interference.
- ASuite Compatibility: Easy programming via Android or Windows application.
- RED Compliant: Meets European regulatory standards.
입력/출력 포트:
- 입력: 5 (e.g., 1x FM, 4x VHF/UHF or 1x FM, 1x DAB, 3x UHF)
- 출력: 1 (Main RF Output)
- 프로그래밍 포트: For connection with ASuite application.
5. 설정 및 설치
5.1 장치 장착
- Choose a dry, well-ventilated location, away from direct sunlight and heat sources.
- Mount the unit securely to a wall or suitable surface using appropriate fasteners. Ensure sufficient space around the unit for cable connections and heat dissipation.
5.2 Connecting Antennas and Cables
- Connect your terrestrial antennas (FM, DAB, VHF, UHF) to the corresponding input ports on the Avant X Basic unit.
- Connect the main RF output of the Avant X Basic to your distribution network or directly to the first amplifier/splitter in your system.
- Ensure all F-connectors are securely tightened to prevent signal loss.
5.3 전원 연결
- Connect the power cable to the unit's power input.
- Plug the power cable into a suitable electrical outlet (220-230 Vac).
- The unit will power on, and indicators will illuminate.
6. 사용 설명서
6.1 Initial Configuration and Programming
The TELEVES Avant X Basic is programmed using the ASuite application, available for Android devices and Windows computers.
- Download and install the ASuite application from the official TELEVES web사이트나 기기의 앱 스토어에서 다운로드하세요.
- Connect your programming device (smartphone/tablet via Bluetooth or PC via USB) to the Avant X Basic unit.
- Launch the ASuite application. The application will guide you through the process of scanning available terrestrial signals and configuring the digital filters.
- Filter Programming: Program up to 32 digital filters to select and amplify specific channels from your VHF+UHF inputs.
- 입력 구성: Select the desired distribution mode (FM-4xVHF/UHF or FM-DAB-3xUHF) based on your antenna setup.
- Gain and Equalization: 조정하다 amplification and equalization levels for each input to optimize signal quality and balance output levels. The unit features Automatic Gain Control (AGC) for stable output. Manual adjustments can be made within a specified range.
- LTE 필터링: The unit automatically detects and filters LTE700 signals (Channel 48 and above) to prevent interference with DTT signals. No manual configuration is typically required for this feature.
- Save your configuration to the device once programming is complete.
6.2 모니터링 작업
After programming, the unit will continuously process and amplify the selected signals. You can use the ASuite application to monitor signal levels and device status if needed.
7. 유지관리
- 청소: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or abrasive materials.
- 통풍: 과열을 방지하려면 환기구가 막히지 않았는지 확인하세요.
- 펌웨어 업데이트: Periodically check the TELEVES website for firmware updates for the Avant X Basic unit and the ASuite application to ensure optimal performance and access to new features.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 신호 없음 또는 신호 품질이 좋지 않음 |
|
|
| 장치의 전원이 켜지지 않음 |
|
|
| Interference from mobile signals (LTE) |
|
|
9. 기술 사양
| 일반적인 | |
|---|---|
| 상표 | 텔레비전 |
| 모델 번호 | 532103 |
| 입력 수 | 5 |
| 출력 수 | 1 |
| Programmable Digital Filters | 최대 32개 |
| Channels per Filter | 1에서 4까지 |
| LTE 필터링 | Automatic (LTE700 / Channel 48) |
| 전원 공급 장치tage | 220 - 230 진공 |
| 최대 전류 소비 | 130mA |
| 최대 전력 소비량 | 14와트 |
| 보호 지수 | IP20 |
| 작동 온도 | -5 ~ 45 ° C |
| 품목 무게 | 800g |
| 매개변수 | FM(87~108MHz) | DAB (174-230 MHz) | UHF(470-694MHz) |
|---|---|---|---|
| 얻다 | 29데시벨 | 75데시벨 | 75데시벨 |
| 이득 조정 범위 | 0~25dB | (주)에이치씨씨 | (주)에이치씨씨 |
| Manual Adjustment (after AGC) | -5 ~ 5dB | -5 ~ 5dB | -3 ~ 3dB |
| 경사 조정 | 없음 | 없음 | 0~5dB |
| 입력 레벨 | 76 - 101 dBµV | 40 - 100 dBµV | 40 - 100 dBµV |
| Output Level (DIN45004B) | 122dBµV | 122dBµV | 122dBµV |
| Output Level (EN50083) | 126dBµV | 126dBµV | 126dBµV |
| Programmable Output Levels | 80 - 105 dBµV | 87 - 112 dBµV | 90 - 115 dBµV |
| 잡음 지수 | 7데시벨 | 7데시벨 | 6데시벨 |
| 선택성 | > 20dB | > 65dB | > 65dB |
| Input Power (12Vdc) | 없음 | 12 Vdc | 12 Vdc |
| Max Input Current (12Vdc) | 없음 | 70mA | 70mA |
10. 보증 및 지원
For warranty information, please refer to the documentation provided with your purchase or visit the official TELEVES web대지.
For technical support, product inquiries, or service, please contact TELEVES customer support through their official channels.
- 공식적인 Web대지: www.텔레브스.com
- 연락처 정보: Refer to the "Contact Us" section on the TELEVES web지역 지원에 대한 자세한 내용은 사이트를 참조하세요.