NUWATT 6인치 짐벌 LED 매립형 조명 사용 설명서

소개

Thank you for choosing the NUWATT 6 Inch Gimbal LED Recessed Light. This product is designed for versatile lighting applications, offering adjustable light direction and selectable color temperatures. This manual provides essential information for safe installation, operation, and maintenance of your new recessed lights. Please read it thoroughly before beginning installation.

Figure 1: NUWATT 6 Inch Gimbal LED Recessed Light (12-pack shown)

안전 정보

경고: To avoid electric shock, always turn off power at the circuit breaker before installing or servicing the fixture. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.

• Do not install in wet locations. Suitable for damp 위치.
• 전원 공급 장치 볼륨을 확인하십시오.tage matches the fixture's requirements (120V).
• 제품을 개조하지 마십시오. 개조 시 보증이 무효화되고 안전상의 위험이 발생할 수 있습니다.
• This fixture is IC Rated, meaning it is suitable for direct contact with insulation.

상자 안에 무엇이 들어있나요?

각 패키지에는 다음 구성 요소가 포함되어 있습니다.

• 6" Gimbal LED Downlight
• 금속 정션 박스
• Hole Size Cut Out Template
• Wiring Instructions (detailed in this manual)

Figure 2: Included Components and Installation Steps Overview

설정 및 설치

The NUWATT Gimbal LED Recessed Light features a slim, canless design for easy installation without the need for a separate housing. Follow these steps for proper installation:

1. 전원 끄기: 시작하기 전에 설치 구역의 전원이 차단기에서 꺼져 있는지 확인하십시오.
2. 컷 구멍: Use the provided hole size cut-out template to mark and cut a 6.25-inch diameter hole in the ceiling. Ensure there are no obstructions behind the ceiling at the chosen location.
   

   Figure 3: Cutting the Ceiling Hole

3. Wire Junction Box: Open the metal junction box. Connect the building's electrical wires (Live, Neutral, Ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure. Close the junction box cover.
   

   Figure 4: Junction Box Wiring

4. 전등을 접속함에 연결하세요: Connect the male connector from the LED downlight to the female connector extending from the junction box. Ensure a firm connection.
5. 접속 박스를 삽입하세요: Place the wired junction box through the cut hole into the ceiling cavity.
6. 다운라이트 설치: Push the spring clips on the sides of the LED downlight upwards. Carefully insert the downlight into the cut hole. The spring clips will automatically snap down and secure the fixture against the ceiling.
   

   Figure 5: Securing the Downlight
7. 렌즈 각도 조정: Once installed, the gimbal lens can be tilted up to 30 degrees in any direction to adjust the light beam angle. This is ideal for sloped ceilings or for directing light to specific areas.
   

   Figure 6: Adjustable Gimbal Lens

8. 복원력 : 회로 차단기를 다시 켜세요.

작동 지침

Your NUWATT Gimbal LED Recessed Light offers adjustable color temperature and dimming capabilities.

색온도 선택 (5CCT)

Before final installation, or by carefully pulling down the fixture (without disconnecting wires), you can select one of five color temperatures using the switch located on the junction box:

• 2700K: Soft White (Warm, inviting light)
• 3000K: Warm White (Slightly less yellow than 2700K)
• 3500K: Neutral White (Balanced, natural light)
• 4000K: Cool White (Brighter, more energetic light)
• 5000K: Daylight (Very bright, bluish-white light)

Figure 7: 5 Color Temperature Options

디밍 기능

These lights are Triac dimmable, allowing for smooth brightness adjustment from 100% down to 10% when used with compatible Triac dimmer switches. Ensure your dimmer switch is rated for LED lighting.

Figure 8: Dimmable Lighting

유지

The NUWATT Gimbal LED Recessed Light requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

• 청소: 청소하기 전에 전원이 꺼져 있는지 확인하십시오. 부드럽고 마른 천이나 약간 젖은 천으로 조명 기구를 닦으십시오.amp cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or lens.
• 전구 교체: The LED chips are integrated and not user-replaceable. The fixture is designed for a long lifespan.
• 점검: 정기적으로 조명기구를 점검하여 손상이나 연결 불량이 있는지 확인하십시오. 문제가 발견되면 전원을 끄고 자격을 갖춘 전기 기술자에게 문의하십시오.

문제 해결

If you experience issues with your NUWATT Gimbal LED Recessed Light, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact NUWATT customer support.

명세서

Key technical specifications for the NUWATT 6 Inch Gimbal LED Recessed Light:

그림 9: 제품 사양view

보증 및 지원

NUWATT stands behind the quality of its products. This product comes with a 한정 보증. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official NUWATT web대지.

NUWATT is a US Family Business with over 50 years of lighting experience, committed to providing industry-leading features, quality, and durability. For technical assistance, troubleshooting, or warranty claims, please contact NUWATT customer support. Contact information can typically be found on the product packaging or the official NUWATT web대지.

온라인 리소스: For additional information, FAQs, and product updates, visit the NUWATT Store on Amazon.

Figure 10: NUWATT Brand Logo