소개
Thank you for choosing the Rolanstar 39-inch Computer Desk. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new desk. Please read this manual thoroughly before assembly and retain it for future reference.
안전 정보
- 책상을 조립할 때는 항상 부드럽고 깨끗한 표면 위에서 조립하여 흠집이 생기는 것을 방지하십시오.
- 사용 전에 모든 나사와 패스너가 단단히 조여졌는지 확인하십시오. 정기적으로 점검하고 필요하면 다시 조여 주십시오.
- Do not overload the desk or drawers beyond their stated weight capacity.
- 감전 사고를 예방하기 위해 액체를 내장 전원 콘센트에서 멀리하십시오.
- Do not allow children to climb on or play with the desk.
- Use the desk on a level surface to prevent tipping. Adjustable feet are provided for stability on uneven floors.
패키지 내용
조립을 시작하기 전에 아래 나열된 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.
- Computer Desk components (particle board panels, metal frame parts)
- 통합 전원 콘센트 (AC 콘센트 2개, USB 포트 2개)
- 모니터 받침대
- 2개의 서랍
- Accessory Bag (screws, bolts, L-shaped Allen wrench)
- Table Corner Protectors
- 케이블 타이
- 사용 설명서
- 4 Adjustable Feet Pads
설정 및 조립
Assembly typically takes approximately 30 minutes with one person. Follow the numbered steps in the included instruction manual. Ensure all parts are correctly oriented before tightening screws.
1단계: 금속 프레임 조립
Connect the metal frame components using the provided screws and the L-shaped Allen wrench. Do not fully tighten screws until all parts are loosely assembled.
이미지: 이상view of the Rolanstar Computer Desk, showing the rustic brown wooden top and black metal frame.
Step 2: Attach the Desktop and Drawers
Secure the main desktop panel to the assembled metal frame. Install the drawer slides and then insert the two pull-out drawers. Ensure drawers slide smoothly.
Image: Close-up of the desk showing the two drawers open, highlighting their storage capacity for notebooks and paperwork.
Step 3: Install the Monitor Stand and Power Outlet
Attach the monitor stand to the designated area on the desktop. The integrated power outlet is pre-installed within the monitor stand. Route the power cord as needed.
Image: Detail of the monitor stand with the built-in power outlet, featuring two AC outlets and two USB ports.
Image: Diagram showing the overall dimensions of the desk and two possible installation modes for the monitor stand, allowing for different widths.
4단계: 최종 조정
Once all components are assembled, fully tighten all screws. Attach the adjustable feet pads to the bottom of the desk legs and adjust them to level the desk on uneven floors. Use the provided cable ties to manage power cords for a tidy workspace.
Image: Detail of an adjustable foot pad, demonstrating its function for leveling the desk.
작동 지침
Using the Power Outlet
The desk features a built-in power strip with 2 standard AC outlets (120V/12A) and 2 USB ports (5V/2A). Plug the desk's main power cord into a wall outlet. You can then plug your devices directly into the integrated outlets for convenient power access.
Image: The desk's power cord, approximately 6.5 feet long, shown extending from the integrated power outlet on the monitor stand.
Utilizing the Monitor Stand
The monitor stand is designed to elevate your monitor, promoting an ergonomic sitting posture and reducing neck strain. It also provides additional storage space underneath for small items or a keyboard when not in use.
Image: An illustration demonstrating the ergonomic benefits of using the monitor stand to achieve a correct sitting posture.
서랍 사용법
The two pull-out drawers offer hidden storage for documents, office supplies, or personal items, helping to keep your desktop clear and organized.
유지
- 청소: The desk surface is made of melamine veneer, which is waterproof and dust-free. Wipe clean with a damp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 피하세요.
- 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 보호: Use the provided table corner protectors to prevent damage to the desk and injuries.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 책상이 흔들거린다. | 바닥이 고르지 않거나 잠금장치가 느슨함. | 책상의 수평을 맞추기 위해 발판을 조절하십시오. 모든 조립 나사를 확인하고 조이십시오. |
| 서랍이 매끄럽게 미끄러지지 않습니다. | 서랍 레일 설치 불량 또는 걸림. | Ensure drawer slides are correctly aligned and installed. Check for any obstructions in the tracks. |
| 전원 콘센트가 작동하지 않습니다. | Desk power cord not plugged in, or circuit breaker tripped. | Verify the desk's power cord is securely plugged into a functional wall outlet. Check your home's circuit breaker. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 롤란스타 |
| 모델 번호 | CPT014-RR |
| 제품 크기(D x W x H) | 19.7인치 깊이 x 39.4인치 너비 x 34.2인치 높이 |
| 재료 | Engineered Wood (Melamine finish), Metal Frame |
| 색상 | 러스틱 브라운 |
| 서랍 수 | 2 |
| 전원 콘센트 | 2개의 AC 콘센트(120V/12A), 2개의 USB 포트(5V/2A) |
| 전원 코드 길이 | 약 6.5피트 |
| 특별 기능 | Ergonomic Monitor Stand, Adjustable Feet, Cable Management |
| 조립 시간(대략) | 30 minutes (1 person) |
보증 및 지원
For warranty information, technical support, or to order replacement parts, please contact Rolanstar customer service through the retailer where the product was purchased or visit the official Rolanstar website. Please have your model number (CPT014-RR) and purchase date available when contacting support.
Rolanstar Official Store: Visit the Rolanstar Store on Amazon