1. 서론
The FLAMMA FS07 Stereo Cabinet Simulation Pedal is a high-quality effects unit designed for electric guitarists. It offers advanced cabinet simulation and Impulse Response (IR) loading capabilities, allowing users to achieve diverse tonal characteristics. With 7 user preset slots, each capable of storing two different cabinet settings, and support for third-party IR files, the FS07 provides extensive sound customization. This manual details the pedal's features, setup, operation, and maintenance to ensure optimal performance.
2. 안전 지침
- Use only a 9V DC power supply with a minimum current of 304mA. Insufficient current may cause operational issues.
- Ensure the power supply polarity is center negative.
- 본 제품을 비, 습기 또는 극한의 온도에 노출시키지 마십시오.
- 기기를 떨어뜨리거나 강한 충격을 주지 마십시오.
- 직접 분해하거나 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
3. 패키지 내용
The FLAMMA FS07 Stereo Cabinet Simulation Pedal package includes the following items:
- FLAMMA FS07 Pedal
- USB 케이블
- 빠른 시작 가이드
Figure 1: FLAMMA FS07 pedal, USB cable, and quick start guide as packaged.
4. 컨트롤 및 기능
The FLAMMA FS07 features intuitive controls for easy sound shaping and preset management.
그림 2: 이상view of FLAMMA FS07 controls.
- 레벨 노브: 페달의 전체 출력 볼륨을 조절합니다.
- 유형 손잡이: Selects one of the 11 factory cabinet simulations or loaded IRs.
- LATENCY Knob: Adjusts the latency of the cabinet simulation.
- LOW CUT 노브: Controls the low-frequency cutoff point.
- 하이 컷 노브: Controls the high-frequency cutoff point.
- SAVE A/B Button: Used to save current settings to a preset slot. Each slot can store two different cabinet settings (A and B).
- Preset LEDs (1-7): Indicate the currently selected preset slot.
- 풋스위치: Activates/bypasses the effect or cycles through presets, depending on its assigned mode.
5. 연결
The FS07 offers flexible connectivity options for various setups.
Figure 3: Pedalboard connection diagrams.
- INPUT L (MONO) / INPUT R Jacks: Connect your guitar or other effects pedals here. Use INPUT L for mono input.
- OUTPUT L (MONO) / OUTPUT R Jacks: 당신에게 연결 amplifier, mixer, audio interface, or FRFR system. Use OUTPUT L for mono output.
- DC 9V 입력: Connect a 9V DC center-negative power supply (minimum 304mA).
- USB 포트: Connect to a computer for software editing and IR loading.
연결 다이어그램:
- 모노 설정: Guitar -> Stompbox/Effect Pedals/Preamp -> FS07 Input L (Mono) -> FS07 Output L (Mono) -> Mixer/Monitor/Audio Interface/FRFR System.
- 스테레오 설정: Guitar -> Stompbox/Effect Pedals/Preamp -> FS07 Input L (Mono) & Input R -> FS07 Output L & Output R -> Mixer/Monitor/Audio Interface/FRFR System.
- Multi-Effect Setup: Guitar -> Multi-Effect Board -> FS07 Input L (Mono) -> FS07 Output L (Mono) -> Mixer/Monitor/Audio Interface/FRFR System.
- FX 루프 포함 Amp정수기: Guitar -> Multi-Effect Board (Send) -> FS07 Input L (Mono) -> FS07 Output L (Mono) -> Mixer/Monitor/Audio Interface/FRFR System. Multi-Effect Board (Return) -> Amplifier. (Note: In this setup, connect the output to the amplifier to bypass the cab sim. The other output connecting to the mixer/FRFR system should have the cab sim on.)
6. Factory Cabinet Simulations
The FS07 comes pre-loaded with 11 high-quality factory cabinet simulations. These can be selected using the TYPE knob.
Figure 4: Factory Cabinet Simulation List.
| 이름 | 설명 |
|---|---|
| 미국 DLX 112 | Based on Fender® '65 Deluxe reverb 112 cabinet |
| 블루스 112 | Based on Fender® Blues Deluxe 112 cabinet |
| 소닉 112 | Based on Fender® Super Sonic 112 cabinet |
| US BASS 410 | Based on Fender® '59 Bassman 410 cabinet |
| 미국 TWN 212 | Based on Fender® '65 Twin Reverb 212 cabinet |
| 영국 212 | Based on VOX® AC30 212 cabinet |
| BLUENO 212 | Based on Bruno® 212 Football cabinet |
| 녹화 412 | Based on MESA/Boogie® Rectifier® STD 412 cabinet |
| CALI 412-1 | Based on MESA/Boogie® Recto Trad 412 cabinet |
| VHS 412 | Based on Diezel® 412 FV 412 cabinet |
| EV 5050 412 | Based on EVH® 5150 412 cabinet |
*NOTES: All product names belong to their owners and are only used in this product and manual as a reference to tone types.
7. Software Editor and IR Loading
The FLAMMA FS07 comes with specialized editor software for quick management of your presets and loading third-party Impulse Response (IR) files.
Figure 5: FS07 connected to the editor software.
- Connect the pedal to your computer via the USB port.
- Use the editor software to customize parameters, organize presets, and load your own IR files into the pedal's 7 user preset slots.
공식 제품 영상:
Video 1: FLAMMA FS07 Stereo Cabinet Simulation Guitar Pedal Cab Simulator. This video demonstrates the features and sound of the FS07 pedal.
Video 2: FLAMMA FS07 Cabinet Simulation Pedal Connection Guide. This video provides a guide on connecting the FS07 pedal in various setups.
Video 3: FLAMMA FS07 Cabinet Simulation Effects Pedal Demo. This video showcases the different effects and sounds achievable with the FS07 pedal.
Video 4: FLAMMA FS07 Stereo Cabinet Simulation Guitar Pedal 7 User Preset Slots Support IR Load. This video highlights the preset management and IR loading features of the FS07.
8. Footswitch Modes
The footswitch on the FS07 can be customized to operate in different modes, offering flexibility during live performance or practice.
Figure 6: Footswitch functionality options.
- 온/오프 모드: In this mode, a single press of the footswitch toggles the effect on or off.
- Preset Switch Mode: In this mode, a single press of the footswitch cycles through the saved presets (1-7).
Refer to the editor software for instructions on how to assign the footswitch mode.
9. 사양
Detailed technical specifications for the FLAMMA FS07 pedal.
| 사양 | 값 |
|---|---|
| 품목 무게 | 10.6온스(0.3킬로그램) |
| 제품 치수 | 2.76 x 1.99 x 4.78 인치 |
| 본체 소재 | 금속 |
| 색상 | FS07 Cab Sim (Orange) |
| 커넥터 유형 | 1/4인치(6.35mm) 오디오 잭 |
| 하드웨어 인터페이스 | 1/4인치 오디오, USB |
| 신호 형식 | 비슷한 물건 |
| 지원 소프트웨어 | FS07 CAB Edit |
| 전원 | Corded Electric (9V DC, center negative, >304mA) |
10. 문제 해결
- 소리 없음: Check all cable connections, ensure the power supply meets specifications (9V DC, >304mA, center negative), and verify the pedal is not in bypass mode.
- 나쁜 음질: Ensure correct input/output connections, check instrument cables, and adjust the LOW CUT/HIGH CUT knobs to fine-tune the tone.
- 페달이 반응하지 않음: Disconnect and reconnect the power supply. If issues persist, try resetting the pedal via the editor software (if available).
- 소프트웨어 연결 문제: Ensure the USB cable is securely connected and the correct drivers are installed (if required). Try restarting the software and your computer.
11. 유지관리
- Clean the pedal's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- 페달은 직사광선과 극한 온도 변화를 피해 건조한 곳에 보관하십시오.
- 장기간 사용하지 않을 경우 전원 공급 장치를 분리하십시오.
12. 보증 및 지원
FLAMMA products are covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official FLAMMA website. For technical support, troubleshooting assistance, or service inquiries, please contact FLAMMA customer support through their official channels.