SilverStone SG05BB-LITE Mini-ITX Computer Case User Manual

소개

The SilverStone SG05BB-LITE is a compact Mini-ITX computer case designed for small form factor builds. This chassis supports Mini-DTX and Mini-ITX motherboards, SFX power supplies, and graphics cards up to 10 inches (254mm) in length. It features a 120mm front fan for positive pressure cooling and accommodates both 2.5-inch and 3.5-inch hard drives, offering flexibility for various component choices.

패키지 내용

패키지에 모든 구성 요소가 들어 있는지 확인하세요.

• SG05BB-LITE Chassis
• 나사, 스탠드오프, 케이블 타이 등이 포함된 액세서리 상자
• 사용 설명서 (본 문서)

설정 및 설치

구성 요소를 올바르게 설치하려면 다음 단계를 따르세요.

1. 섀시를 준비하세요

Remove the side panels and top cover to access the internal compartments. Refer to the diagram below for an overview 케이스 내부의.

Figure 1: Internal layout of the SG05BB-LITE chassis. Note the pre-installed 120mm fan at the front.

2. 마더보드 설치

1. Install the CPU, CPU cooler (ensure height is within 82mm), and RAM onto your Mini-ITX or Mini-DTX motherboard before placing it into the chassis.
2. Align the motherboard with the pre-installed standoffs. The SG05BB-LITE features elevated standoffs for components on the motherboard's backside.
3. 제공된 나사를 사용하여 마더보드를 고정합니다.

3. 전원 공급 장치(PSU) 설치

1. The SG05BB-LITE supports SFX form factor power supplies.
2. Mount the SFX PSU into its designated rear mount position.
3. 파워서플라이를 나사로 고정하세요.

Figure 2: Illustration of SFX PSU mounting.

4. 저장 드라이브 설치

The case supports both 2.5-inch and 3.5-inch hard drives.

• Locate the drive bays.
• Mount your 2.5-inch SSDs or 3.5-inch HDDs using the appropriate screws.
• Connect power and data cables to the drives.

5. 그래픽 카드 설치

The SG05BB-LITE can accommodate graphics cards up to 10인치(254mm) 길이로.

1. Insert the graphics card into the PCI-E slot on the motherboard.
2. Secure the card with the retention mechanism or screw.
3. Ensure adequate clearance, especially for dual-fan cards, as space can be tight.

6. 전면 패널 연결

Connect the front panel cables (USB, audio, power switch, reset switch, power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.

Figure 3: Front panel of the SG05BB-LITE, featuring USB 3.0 ports and audio jacks.

Figure 4: Close-up of the front panel I/O, including USB 3.0 ports.

7. 케이블 관리

Route cables neatly to ensure optimal airflow and prevent interference with components. Use the provided cable ties to secure excess cabling.

8. Reassemble the Chassis

Once all components are installed and cables are managed, reattach the side panels and top cover. Ensure all screws are tightened securely.

작동 지침

After assembly, connect your monitor, keyboard, mouse, and power cable to the system. Press the power button on the front panel to start your computer. The front 120mm fan provides positive pressure cooling, drawing cool air into the case to maintain optimal component temperatures.

유지

• 먼지 청소: Regularly clean the dust filters (if present) and the interior of the case to maintain optimal airflow and cooling performance. Use compressed air to remove dust from fans and heatsinks.
• 팬 검사: Periodically check the 120mm front fan for any obstructions or unusual noises.
• 케이블 관리 : Ensure cables remain tidy to avoid impeding airflow.

문제 해결

• 시스템 전원이 켜지지 않음:
  • Verify all power cables are securely connected to the motherboard, graphics card, and drives.
  • 전원 공급 장치가 켜져 있고 작동하는 전원 콘센트에 연결되어 있는지 확인하십시오.
  • 전면 패널 전원 스위치와 마더보드의 연결 상태를 확인하십시오.
• 과열 문제:
  • Confirm the 120mm front fan is spinning correctly.
  • Ensure CPU cooler is properly seated and making good contact with the CPU.
  • Check for dust buildup obstructing airflow.
  • Verify that the CPU cooler height does not exceed 82mm and is not interfering with the side panel.
• 부품 장착 문제:
  • 그래픽 카드: Ensure your graphics card length does not exceed 10 inches (254mm). Some dual-fan cards may have tight clearances; verify dimensions before installation.
  • 광학 드라이브 : If installing a slim optical drive, ensure its mounting tabs align correctly with the chassis. Some users may need to adjust the drive cage for optimal fit.

명세서

Figure 5: Rear panel of the SG05BB-LITE chassis.

Figure 6: Side panel with ventilation for component cooling.

보증 정보

The SilverStone SG05BB-LITE computer case comes with a 1년 한정 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or detailed terms and conditions, please refer to the official SilverStone web사이트를 방문하거나 고객 지원팀에 문의하세요.

지원하다

For further assistance, technical support, or to download the latest drivers and manuals, please visit the official SilverStone Technology web대지:

www.silverstonetek.com

You may also contact SilverStone customer service for direct support.