1. 서론
This manual provides detailed instructions for the safe and effective use of the Kanomax Anemomaster Anemometer Model 6115. This device is designed for precise measurement of wind speed, wind temperature, and static pressure. Please read this manual thoroughly before operating the instrument and keep it for future reference.
그림 1: Kanomax Anemomaster Anemometer Model 6115. This image shows the main unit of the anemometer, typically featuring a display screen, control buttons, and a probe connection port.
2. 안전수칙
부상과 기기 손상을 방지하기 위해 항상 다음 안전 예방 조치를 준수하세요.
- 기기를 극한의 온도, 습도 또는 직사광선에 노출시키지 마십시오.
- 악기를 떨어뜨리거나 강한 충격을 가하지 마십시오.
- 기기를 분해하거나 개조하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
- Ensure the probe is securely connected before operation.
- Keep the instrument away from strong magnetic fields.
3. 설정
3.1 풀기 및 검사
Carefully remove the anemometer and its accessories from the packaging. Verify that all components are present and undamaged. If any items are missing or damaged, contact your supplier immediately.
3.2 배터리 설치
- 장치 뒷면에서 배터리 덮개를 찾으세요.
- 덮개를 밀거나 풀어서 엽니다.
- Insert the specified batteries (e.g., AA batteries) according to the polarity indicators (+/-).
- 배터리함 덮개를 다시 씌우고 단단히 닫았는지 확인하십시오.
3.3 프로브 연결
Connect the anemometer probe to the designated port on the main unit. Ensure the connection is firm to prevent inaccurate readings or damage.
4. 사용 설명서
4.1 전원 켜기/끄기
를 누르고 계세요 힘 button to turn the instrument on. To turn it off, press and hold the 힘 화면이 꺼질 때까지 버튼을 다시 누르세요.
4.2 측정 모드
The Kanomax 6115 supports various measurement modes:
- 풍속: Displays air velocity in selected units (m/s, fpm, km/h, mph).
- 바람 온도: Displays air temperature in Celsius or Fahrenheit.
- 정적 압력 : Displays pressure readings in selected units (Pa, hPa, mmHg, inH2O).
사용하세요 방법 button to cycle through the available measurement modes.
4.3 측정하기
- 원하는 측정 모드를 선택합니다.
- Position the probe in the airflow or environment to be measured. Ensure the probe is oriented correctly for accurate readings.
- Read the values displayed on the screen. The display will update in real-time.
- Some models may feature data hold or averaging functions. Refer to the specific button labels for these features.
4.4 단위 선택
To change measurement units (e.g., m/s to fpm for wind speed, °C to °F for temperature), refer to the instrument's settings menu, typically accessed via a 세트 or 단위 단추.
5. 유지관리
5.1 청소
Wipe the instrument's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the probe free from dust and debris.
5.2 배터리 교체
Replace batteries when the low battery indicator appears on the display. Always use new batteries of the specified type. Remove batteries if the instrument will not be used for an extended period.
5.3 보관
Store the anemometer in its original case or a protective pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기기의 전원이 켜지지 않습니다. | 배터리가 방전되었거나 잘못 설치되었습니다. | 배터리 극성을 확인하고 배터리를 교체하세요. |
| 부정확한 판독값. | Probe not properly connected; dirty probe; instrument not calibrated. | Ensure probe is secure; clean probe; contact service for calibration. |
| Display shows "Err" or blank. | System error; out of measurement range. | Restart the instrument; ensure measurements are within specified range. If error persists, contact support. |
7. 사양
| 매개변수 | 값 |
|---|---|
| 모델 번호 | 6115 |
| 측정 기능 | Wind Speed, Wind Temperature, Static Pressure |
| 풍속 범위 | (전ample: 0.1 to 30.0 m/s) |
| 풍속 및 온도 범위 | (전ample: -20 to 70 °C) |
| 압력 범위 | (전ample: 0 to 500 Pa) |
| 전원 공급 장치 | (전ample: 4 x AA batteries) |
| 치수 | (전ample: 180 x 85 x 45 mm) |
| 무게 | (전ample: 400 g (including batteries)) |
Note: Specific ranges and values may vary. Refer to the product's packaging or official data sheet for exact specifications.
8. 보증 및 지원
Kanomax products are manufactured to high quality standards. For warranty information, technical support, or service, please contact your local Kanomax distributor or visit the official Kanomax web대지.
공식적인 Web대지: www.kanomax.com