비스토스 Bt-410 헤드 Lamp 사용자 설명서

1. 서론

Thank you for choosing the Bistos Bt-410 Head Lamp. This ultra-bright LED head lamp is designed for various applications requiring focused and hands-free illumination. Featuring a high-density LED, an easy-to-adjust head strap, and an extensive LED lifetime, the Bt-410 provides reliable performance. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your device. Please read this manual thoroughly before using the product and retain it for future reference.

2. 안전 정보

부상이나 기기 손상을 방지하기 위해 항상 다음 안전 수칙을 준수하십시오.

• 눈 안전: Do not stare directly into the LED light. The ultra-bright light can cause temporary vision impairment or permanent eye damage.
• 열: The LED light source may become warm during prolonged use. Avoid direct contact with the light housing when it is hot.
• 배터리 안전: Ensure proper battery polarity when inserting. Do not mix old and new batteries, or different types of batteries. Dispose of batteries according to local regulations.
• 물 노출: This device is not waterproof. Avoid exposing the head lamp to water or excessive moisture to prevent electrical shock or damage.
• 청소: Use only a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
• 어린이들: 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 설정

3.1 헤드 스트랩 조절하기

The Bt-410 Head Lamp features an easy-to-adjust head strap for a comfortable and secure fit. Place the head lamp on your head and adjust the strap using the buckles until it feels snug but not too tight. Ensure the main unit rests comfortably on your forehead.

The Bistos Bt-410 Head Lamp worn on a head, demonstrating its adjustable strap and the position of the ultra-bright LED light.

3.2 Attaching the Loupe (Optional)

If you have the optional attachable loupe, carefully align it with the designated attachment points on the head lamp's main unit and secure it according to the loupe's specific instructions. Ensure it is firmly attached before use.

측면 view of the Bistos Bt-410 Head Lamp, highlighting the main unit, adjustable light head, and the comfortable head strap.

3.3 배터리 충전

The Bt-410 Head Lamp is designed for easy recharging. Connect the provided charging cable to the charging port on the head lamp and plug the other end into a suitable power source. An indicator light will typically show the charging status. Ensure the device is fully charged before first use to maximize battery life. The device provides more than 4 hours of continuous use on a full charge.

4. 사용 설명서

4.1 전원 켜기/끄기

Locate the power button on the main unit of the head lamp. Press the button once to turn the light on. Press it again to turn the light off.

4.2 조명 각도 조절

The LED light head is designed to be adjustable. Gently tilt the light head up or down to direct the beam to your desired angle. Do not force the adjustment beyond its natural range of motion.

5. 유지관리

5.1 청소

To clean the head lamp, wipe the exterior surfaces with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or solvents. Ensure the device is powered off and disconnected from any charging source before cleaning.

5.2 배터리 관리 및 보관

To prolong battery life, avoid fully discharging the battery frequently. Recharge the device when the light begins to dim. If storing the head lamp for an extended period, ensure it is partially charged (around 50%) and store it in a cool, dry place away from direct sunlight. Recharge it every few months to prevent deep discharge.

5.3 LED Lifetime

The Bt-410 Head Lamp features an extensive LED lifetime of more than 50,000 hours, ensuring long-term performance under normal operating conditions.

6. 문제 해결

If you encounter issues with your Bt-410 Head Lamp, 다음의 일반적인 문제와 해결책을 참조하세요.

• 표시등이 켜지지 않음:
  • Ensure the battery is charged. Connect the head lamp to its charger and allow sufficient time for charging.
  • 전원 버튼이 제대로 작동하는지 확인하세요.
• 빛이 희미하다:
  • The battery may be low. Recharge the head lamp.
  • Ensure the LED lens is clean and free from dirt or smudges.
• Head strap is uncomfortable:
  • Adjust the strap tension to find a comfortable fit.
  • Ensure the main unit is positioned correctly on your forehead.

If the problem persists after attempting these solutions, please contact Bistos customer support for further assistance.

7. 사양

8. 보증 및 지원

Specific warranty information for the Bistos Bt-410 Head Lamp is not provided within this manual. For details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or visit the official Bistos website. For technical support, service, or inquiries, please contact Bistos customer service directly.