소개
This manual provides instructions for the Clear Power DCTC-9503-DC Digital Timer Combo Pack, which includes one 1-Outlet Grounded EZ Digital Indoor Timer and one 2-Outlet Grounded EZ Digital Outdoor Timer. These timers are designed to automate the operation of electrical devices, offering convenience and energy efficiency for various applications, including lighting and small appliances.
Image: The Clear Power Digital Timer Combo Pack, featuring both the indoor and outdoor digital timers.
중요한 안전 정보
- 사용하기 전에 모든 지침을 읽으세요.
- Do not immerse timers in water. The outdoor timer is weather-resistant, not submersible.
- Ensure the timer's electrical rating (15 Amps/125 Volts/1875 Watts) is not exceeded by connected devices.
- 타이머는 항상 접지된 콘센트에 꽂으세요.
- 어린이들이 전자 기기에 접근하지 못하게 하십시오.
- 청소 또는 수리하기 전에 전원을 차단하십시오.
- 타이머나 코드가 손상된 경우 사용하지 마세요.
제품 끝view
Outdoor Digital Timer (DCTC-9503-DC)
This timer features two grounded outlets and a 6-inch cord with a right-angle plug. It is designed for outdoor use and includes a protective cover for the digital display and control buttons.
Image: The outdoor digital timer, highlighting its two grounded outlets and the reversed ground pin design for compatibility with various plugs.
실내 디지털 타이머
This compact timer features one 3-prong grounded outlet and plugs directly into a wall outlet. It is suitable for indoor use with lamps, fans, and holiday lighting.
이미지: 클로즈업 view of the indoor digital timer, showing its display and control buttons.
설정 및 초기 사용
- 내부 배터리 충전: For both timers, plug the unit into a live outlet for at least 30 minutes to fully charge the internal battery. This allows programming without the timer being plugged in and retains settings during power outag에스.
- 타이머 재설정: Use a pointed object (like a toothpick) to press the recessed "Reset" button. This clears all previous settings.
- 플러그인 장치: Connect the devices you wish to control into the timer's outlets.
- Plug Timer into Wall Outlet: Plug the timer into a suitable grounded wall outlet.
Note: The outdoor timer's patented reversed ground pin allows use with right-angle and oversized transformer plugs, preventing obstruction of other outlets.
작동 지침
The EZ Digital timers are designed for simple programming. There is no clock to set; programming is based on a "delay start" and "run time" concept.
Programming Steps (Outdoor Timer Examp르)
Image: Visual guide to programming the outdoor digital timer, showing the display and button functions.
- Turn Timer ON: 를 누르세요 켜짐/꺼짐 button. The display will show "TIMER ON".
- Set Delay Start: 를 누르세요 지연 시작 button. This sets how many hours and minutes from the current moment you want the connected device to turn ON.
- 누르고 있으세요 지연 시작 to move the time quickly.
- Lightly touch and release 지연 시작 to move the time in 1-minute intervals.
- Example: If it's 1:00 PM and you want the device to turn ON at 6:00 PM, set DELAY START for 5:00 (5 hours).
- Set Run Time: 를 누르세요 실행 시간 button. This sets how long the connected device will remain ON.
- 누르고 있으세요 실행 시간 to move the time quickly.
- Lightly touch and release 실행 시간 to move the time in 1-minute intervals.
- Example: If you want the device to turn OFF at 10:30 PM (after turning ON at 6:00 PM), set RUN TIME for 4:30 (4 hours and 30 minutes).
- Activate Daily Repeat: 를 누르세요 반복하다 button. This will set the timer to turn ON/OFF at the same programmed times every day. "REPEAT ON" will appear on the display.
Random Mode (Vacation Mode)
For a "lived-in" appearance when on vacation, use the 무작위의 mode. This feature turns the timer ON/OFF up to 30 minutes before or after the programmed DELAY START and RUN TIME.
- 활성화하려면 무작위의 button. "RANDOM ON" will appear on the display.
- Example: If DELAY START is set for 6:00 PM, in RANDOM mode it will randomly turn ON as early as 5:30 PM or as late as 6:30 PM. If RUN TIME is set for 4.5 hours, it will randomly turn OFF as soon as 4 hours or as late as 5 hours.
수동 오버라이드
- To bypass the timer and control the attached device manually, press the 켜짐/꺼짐 button again. The timer will hold the program until you change it.
- To return control of the device to the timer, press the 켜짐/꺼짐 버튼을 한 번 더 누릅니다.
비디오 지침
Video: Instructions for programming the Clear Power 2-Outlet EZ Digital Outdoor Timer. This video demonstrates setting delay start, run time, repeat, and random modes.
Video: Instructions for programming the Clear Power 1-Outlet EZ Digital Indoor Timer. This video covers setting delay start, run time, repeat, and random modes for the indoor unit.
유지
- Clean the timer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the outdoor timer's protective cover is securely closed to maintain weather resistance.
- Store timers in a cool, dry place when not in use.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 타이머가 설정된 시간에 켜지거나 꺼지지 않습니다. | Incorrect programming; timer in manual override mode; battery not charged. | Review programming steps. Ensure timer is not in manual override. Charge internal battery for 30 minutes. |
| 디스플레이가 비어 있거나 어둡습니다. | Internal battery low or depleted. | 배터리를 충전하려면 타이머를 전원이 공급되는 콘센트에 최소 30분 동안 꽂아 두십시오. |
| 연결된 장치가 전원을 공급받지 못하고 있습니다. | Timer is OFF; device is faulty; timer is not plugged in correctly. | Ensure timer is ON and programmed correctly. Check if the device works when plugged directly into an outlet. Verify timer is fully seated in the wall outlet. |
명세서
- 상표: 클리어 파워
- 모델: DCTC-9503-DC (Combo Pack)
- 전기 등급 : 15 Amps / 125 Volts / 1875 Watts
- 설정 수: 4 (Delay Start, Run Time, Repeat, Random)
- 색상: Black (Outdoor Timer), White (Indoor Timer)
- 한국어: 810048912506
- 제조업체: 클리어 파워
- 첫 번째 이용 가능: 24년 2021월 XNUMX일
- 패키지 크기: 5.51 x 5.16 x 3.82인치; 12.63온스
보증 및 지원
For warranty information or technical support, please contact Clear Power directly. Refer to the product packaging or the official Clear Power web최신 연락처 정보는 사이트에서 확인하세요.
The product is manufactured by Clear Power and sold by DATACONCT SOLUTIONS INC. For further assistance, you may visit the Clear Power Store on Amazon.