Weiser SmartCode 10 Touchscreen Electronic Deadbolt User Manual

소개

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Weiser SmartCode 10 Touchscreen Electronic Deadbolt with Z-Wave Technology. This smart lock is designed to offer enhanced security and convenience for your home. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the benefits of your new deadbolt.

앞쪽 view of the Weiser SmartCode 10 Touchscreen Electronic Deadbolt in Satin Nickel finish.

설정 및 설치

The Weiser SmartCode 10 deadbolt is designed for easy installation. Ensure you have all included components before beginning.

포함된 구성 요소:

• 걸쇠
• 스트라이크 플레이트
• 어댑터 링
• 키
• 스마트키 도구
• 장착 하드웨어
• Lock Assembly (Exterior and Interior)

설치 단계:

1. 문 준비: Ensure your door is properly prepped for a standard deadbolt installation.
2. 래치를 설치하십시오: 걸쇠를 문 가장자리에 끼우고 나사로 고정하십시오.
3. 외부 어셈블리 설치: 케이블을 도어를 통해 연결하고 외부 키패드 어셈블리를 위치시킵니다.
4. 내부 조립 설치: Connect the cable from the exterior assembly to the interior assembly. Secure the interior assembly to the door using the provided mounting hardware.
5. 배터리 설치: The lock requires batteries (not included). Insert 4 AA alkaline batteries into the battery pack located in the interior assembly.
6. 도어 핸딩 프로세스 수행: After battery installation, the lock will automatically determine door handing. This is crucial for proper operation.

The SmartCode 10 deadbolt seamlessly integrated into a residential door.

초기 프로그래밍:

• Master Code Creation: It is highly recommended to create a Master Code immediately after installation for enhanced security and to enable programming of user codes.
• 사용자 코드 추가: The lock supports up to 30 customizable user codes. Refer to the full programming guide for detailed steps on adding, deleting, and modifying user codes.

Operating the Deadbolt

Your SmartCode 10 deadbolt offers multiple ways to secure and access your home.

Keyless Entry via Touchscreen:

• 잠금 해제하려면: Touch the screen with your palm or fingers to activate the keypad. Enter your 4-8 digit user code. The deadbolt will retract.
• SecureScreen Technology: This feature displays random digits before you enter your code, preventing fingerprint analysis on the touchscreen and enhancing security.

A user interacting with the capacitive touchscreen to enter an access code.

문 잠그기:

• 원터치 잠금: 키패드의 잠금 버튼(자물쇠 아이콘)을 누르세요. 데드볼트가 나옵니다.
• 자동 잠금 기능: The deadbolt can be programmed to automatically lock 30 seconds after unlocking. This feature can be enabled or disabled through programming.

SmartKey Re-Key Technology:

This feature allows you to re-key your lock to a new key in seconds, providing flexibility and control over your home's security. This is useful if you lose a key or want to match your new deadbolt to an existing key from another Weiser lock.

1. 작동하는 키를 삽입하고 시계 방향으로 90도 돌리십시오.
2. SmartKey 도구를 SmartKey 구멍에 완전히 단단히 삽입합니다.
3. 스마트키 도구와 작동 키를 제거하십시오.
4. Insert your new key fully and slowly turn it 180 degrees counter-clockwise.

Diagram illustrating the SmartKey Re-Key process and various security features like pick, bump, and drill resistance.

스마트 홈 통합(Z-Wave):

The SmartCode 10 with Z-Wave technology can be integrated into compatible smart home systems like Samsung SmartThings and Wink. This allows for remote access, voice control via Amazon Alexa (through a compatible hub), and inclusion in smart home routines. Refer to your smart home hub's instructions for pairing the deadbolt.

유지

Regular maintenance ensures the longevity and optimal performance of your Weiser SmartCode 10 deadbolt.

청소:

터치스크린과 외부 마감재를 부드러운 천으로 닦아주세요.amp 천을 사용하십시오. 연마성 세척제, 용제 또는 독한 화학 물질은 마감재와 전자 부품을 손상시킬 수 있으므로 사용하지 마십시오.

배터리 교체:

When the batteries are low, the lock will provide an audible alert (beeps) and/or a visual indicator (flashing light) during operation. Replace all four AA alkaline batteries promptly to avoid loss of functionality. Always use new, high-quality alkaline batteries.

일반 관리 :

Ensure the door and frame are properly aligned and the deadbolt operates smoothly without resistance. Misalignment can put undue stress on the lock mechanism.

문제 해결

If you encounter issues with your SmartCode 10 deadbolt, refer to the common problems and solutions below.

일반적인 문제 및 해결책:

• 키패드에 응답하지 않는 잠금 장치:
  • Check batteries. Replace if low or dead.
  • Ensure the touchscreen is clean and free of debris.
  • Verify that the door handing process was completed correctly during installation.
• 사용자 코드가 작동하지 않습니다.
  • Ensure the code is entered correctly and completely.
  • Verify the user code is still active and has not been deleted.
  • Confirm the Master Code is set up correctly.
• 데드볼트가 완전히 확장/수축되지 않음:
  • 문틀이나 잠금장치에 장애물이 있는지 확인하십시오.
  • Ensure the door is properly aligned and not warped.
  • Verify the latch and strike plate are installed correctly and aligned.
• Z-Wave 연결 문제:
  • Ensure the lock is within range of your Z-Wave hub.
  • Check your Z-Wave hub's status and network.
  • Attempt to re-pair the lock with your Z-Wave hub according to your hub's instructions.

공장 초기화 :

If issues persist, a factory reset may be necessary. This will erase all user codes and settings. Refer to the detailed programming guide for your specific model for factory reset instructions.

명세서

보증 및 지원

보증 정보:

The Weiser SmartCode 10 Touchscreen Electronic Deadbolt comes with a 평생 제한 보증. This warranty covers mechanical and finish defects for the lifetime of the product to the original residential user. Electronic components are typically covered for a specific period (details usually found in the full warranty statement). Please retain your proof of purchase.

고객 지원:

For technical assistance, warranty claims, or further information, please visit the official Weiser website or contact their customer support. Contact details are typically available on the product packaging or the manufacturer's web대지.