Arebos AR-HE-SPA4RR

Arebos Inflatable Hot Tub AR-HE-SPA4RR User Manual

Model: AR-HE-SPA4RR

1. 중요 안전 지침

Before installing and using this product, please read, understand, and follow all instructions carefully. Failure to do so may result in serious injury or property damage. Keep this manual for future reference.

1.1 일반 안전

  • Always supervise children in and around the hot tub.
  • Do not use the hot tub if the temperature is below 4°C (40°F) or above 40°C (104°F).
  • 온수 욕조 근처에서 전기 제품 사용을 피하십시오.
  • 온수 욕조는 물과 사람이 가득 찼을 때의 무게를 지탱할 수 있는 평평하고 안정적이며 수평인 표면에 설치해야 합니다.
  • Do not sit or stand on the hot tub's edges.

1.2 전기 안전

  • Connect the hot tub only to a grounded power outlet protected by a Residual Current Device (RCD) with a rated tripping current not exceeding 30mA.
  • 연장코드를 사용하지 마세요.
  • Ensure all electrical components are kept dry.

1.3 Water and Chemical Safety

  • Maintain proper water chemistry to prevent health risks and damage to the hot tub.
  • Do not add bath oils or other non-approved chemicals to the water.
  • Always test water quality before each use.

2. 제품 오버view

The Arebos Inflatable Hot Tub provides a relaxing spa experience for up to 4 persons. It features 100 air jets for a soothing massage and a heating function to reach a comfortable water temperature of up to 40°C.

Arebos Inflatable Hot Tub in an outdoor setting with a sea view

Image: The Arebos Inflatable Hot Tub, showcasing its design and suitability for outdoor use.

3. 설정 및 설치

The Arebos Inflatable Hot Tub is designed for easy, tool-free setup with an automatic inflation function.

3.1 포장 해제 및 부지 준비

  1. 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
  2. Choose a suitable location for your hot tub. The surface must be flat, level, and free of sharp objects. It must also be strong enough to support the weight of the filled hot tub (approximately 800 kg + occupants).
  3. Unfold the ground cloth (if included) and place it on the chosen site.
Illustration of easy hot tub installation

Image: Visual representation of the straightforward installation process.

3.2 인플레이션

  1. Connect the inflation hose to the hot tub's air valve and the pump unit.
  2. Plug in the pump unit and activate the inflation function. The hot tub will automatically inflate.
  3. Once fully inflated, disconnect the hose and securely close the air valve.

3.3 물 채우기

  1. 배수 밸브가 닫혀 있는지 확인하십시오.
  2. Fill the hot tub with fresh water using a garden hose until the water level is between the minimum and maximum fill lines indicated inside the hot tub. The capacity is approximately 800 liters.

4. 사용 설명서

The hot tub features an integrated control panel for easy management of its functions.

LED display control panel for the hot tub

Image: The central LED display control panel, allowing easy adjustment of all functions.

4.1 전원 켜기/끄기

  • Press the power button on the control panel to turn the hot tub system on or off.

4.2 가열 기능

  • Press the heater button to activate the heating system.
  • Use the temperature adjustment buttons (up/down arrows) to set your desired water temperature, up to a maximum of 40°C (104°F).
  • 히터가 작동 중이면 가열 표시등이 켜집니다.

4.3 Bubble Massage Function

  • Press the bubble button to activate the 100 dynamic air jets.
  • Press the button again to turn off the bubble function.
Illustration of dynamic air jets creating bubbles in the hot tub

Image: Dynamic air jets providing a relaxing bubble massage experience.

4.4 여과 시스템

  • The filtration system operates automatically to keep the water clean.
  • Refer to the maintenance section for filter cleaning and replacement.

4.5 타이머 기능

  • Use the timer button to set a delayed start or duration for the heating function. Consult the detailed instructions in the full manual for specific timer programming.

5. 유지관리

Regular maintenance is essential for the longevity and hygienic operation of your hot tub.

5.1 필터 카트리지 유지 관리

The hot tub is equipped with an effective filter system. A filter alarm function will indicate when the filter needs attention.

  1. 청소: Turn off the hot tub. Remove the filter housing and take out the filter cartridge. Rinse the cartridge thoroughly with a garden hose to remove debris.
  2. 대사: If the filter cartridge remains dirty or damaged after cleaning, replace it with a new one. The filter alarm will also indicate when replacement is necessary.
Various hot tub accessories including a filter cartridge

Image: Included accessories, featuring the filter cartridge for the hot tub's filtration system.

5.2 물 처리

  • Regularly test the water pH and sanitizer levels using a test kit.
  • Adjust chemicals as needed to maintain recommended levels (e.g., pH between 7.4-7.6, chlorine/bromine as per product instructions).

5.3 배수 및 청소

  1. 배수: Connect a garden hose to the drain valve and open the valve to empty the hot tub.
  2. 청소: Once empty, clean the interior surface of the hot tub with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly.

5.4 온수 욕조 커버

Always use the included hot tub cover when not in use to retain heat, keep debris out, and ensure safety.

Hot tub with its protective cover installed

Image: The hot tub with its cover securely fastened, demonstrating its protective features.

Close-up of safety buckles on the hot tub cover

Image: Detail of the safety buckles used to secure the hot tub cover.

6. 문제 해결

This section addresses common issues you might encounter with your Arebos Inflatable Hot Tub.

6.1 온수 욕조 난방 불량

  • 전원 확인: Ensure the hot tub is properly plugged into a functional, grounded outlet.
  • 필터 청결도: A dirty filter can restrict water flow and prevent heating. Clean or replace the filter cartridge.
  • 온도 설정: Verify the desired temperature is set correctly and is within the operational range (up to 40°C).
  • 수위: Ensure the water level is between the minimum and maximum fill lines.

6.2 Bubbles Not Working

  • 힘: Confirm the hot tub is powered on.
  • 거품 버튼: Ensure the bubble function is activated on the control panel.
  • Air Blower Obstruction: Check for any obstructions in the air blower intake or jets.

6.3 Water Quality Issues (Cloudy/Green Water)

  • 필터: 필터 카트리지를 청소하거나 교체하십시오.
  • 화학적 균형: Test water chemistry (pH, sanitizer) and adjust as necessary. Shock treatment may be required for severe issues.
  • 물 변화: If problems persist, drain and refill the hot tub with fresh water.

6.4 누출

  • 이음새 검사: Carefully check the hot tub's seams and valves for any visible damage or loose connections.
  • 수리 키트: Use the provided repair patch kit for small punctures.
  • 지원팀에 문의: For larger leaks or persistent issues, contact customer support.

7. 사양

Detailed technical specifications for the Arebos Inflatable Hot Tub AR-HE-SPA4RR.

아레보스 공기주입식 온수 욕조의 치수를 보여주는 도표

이미지: 차원적view of the hot tub, indicating its 180 cm diameter and 65 cm height.

특징사양
모델 번호AR-HE-SPA4RR
상표아레보스
제조업체Canbolat Vertriebs GmbH
제품 크기(L x W x H)180cm x 180cm x 65cm
품목 무게21 킬로그램
재료폴리염화비닐(PVC)
모양둥근
물 용량800리터
좌석 수4인
항공기 수100
최대. 가열 온도40°C(104°F)
조립이 필요합니다No (Automatic Inflation)

8. 보증 및 지원

For warranty information, technical support, or to order replacement parts, please contact Arebos customer service or visit the official Arebos web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.

제조업체: Canbolat Vertriebs GmbH

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.