셰파흐 HS250L SE 테이블톱 사용 설명서

제품 끝view

The Scheppach HS250L SE is a powerful 2000W table saw designed for precise cutting of various wood materials. It features a laser cutting guide for accuracy, a robust stand, and extendable table surfaces for handling larger workpieces. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your table saw.

Image: The Scheppach HS250L SE Table Saw, shown with its integrated stand and two included saw blades. This view highlights the main components of the saw, including the table, blade guard, and control panel.

안전 지침

Always prioritize safety when operating power tools. Read and understand all safety warnings and instructions before using the Scheppach HS250L SE table saw. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• 안전 안경, 청력 보호 장비, 방진 마스크 ​​등 적절한 개인 보호 장비(PPE)를 착용하세요.
• 작업 공간이 깨끗하고, 조명이 밝으며, 방해물이 없는지 확인하세요.
• 어린이와 주변인이 작업 영역에 접근하지 못하도록 하십시오.
• d에서 톱을 작동하지 마십시오.amp 또는 습한 환경.
• 톱을 조정하거나, 날을 교체하거나, 유지 보수를 하기 전에는 항상 전원 플러그를 뽑으십시오.
• Use a push stick when cutting small workpieces.
• 칼날 보호대가 항상 제자리에 있고 제대로 작동하는지 확인하십시오.

설정

Proper assembly and setup are crucial for the performance and safety of your table saw.

풀기 및 검사

1. 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. Check for any shipping damage or missing parts. Refer to the included parts list.
3. 포장재를 책임감 있게 폐기하세요.

스탠드 조립

Assemble the robust stand according to the diagrams provided in the full manual. Ensure all bolts and fasteners are securely tightened for stability.

Image: The Scheppach HS250L SE Table Saw fully assembled on its stable stand, demonstrating its robust construction and non-slip rubber feet for high stability during operation.

Attaching Table Extensions

The table saw includes additional table extensions for both the left and right sides. Attach these extensions to expand your working surface, which is particularly useful for larger workpieces.

이미지: 클로즈업 view of the Scheppach HS250L SE Table Saw, showing the table extension in use. This feature allows for processing larger workpieces by providing an extended support surface.

블레이드 설치

The saw comes with two Ø 254 mm carbide saw blades. Ensure the saw is unplugged before installing or changing blades. Follow the directional arrows on the blade and the saw for correct orientation.

Laser Guide Setup

The integrated laser cutting guide requires batteries (included). Install the batteries and test the laser alignment. Adjust if necessary to ensure it accurately indicates the cutting line.

작동 지침

Familiarize yourself with the controls and functions before beginning any cutting operations.

전원 켜기/끄기

• Connect the power cable to a suitable 230V electrical outlet.
• Press the green "ON" button to start the saw.
• Press the red "OFF" button to stop the saw.

Adjusting Cutting Depth and Angle

The saw allows for precise adjustments of cutting depth and angle:

• 절단 깊이 : Use the depth adjustment mechanism to set the desired cutting depth. Maximum cutting depth at 90° is 87 mm, and at 45° is 55 mm.
• 절단 각도: The swiveling cross stop can be adjusted from -45° to 45° for miter cuts.

Image: A diagram illustrating the maximum cutting heights of the Scheppach HS250L SE Table Saw at 90° (87 mm) and 45° (55 mm). It also shows the table extension capability and the ergonomic table height of 870 mm.

컷 만들기

Always ensure the workpiece is securely supported and guided. Use the rip fence for straight cuts and the miter gauge for angled cuts. Engage the laser guide for enhanced accuracy.

Image: A person demonstrating the use of the Scheppach HS250L SE Table Saw, highlighting the ergonomic working posture enabled by the 870 mm table height. The user is guiding a wooden board through the saw.

응용 프로그램 예amp레

The Scheppach HS250L SE is suitable for various cutting tasks on wood, including:

• Cutting beams
• Cutting profile 무대
• Cutting general boards
• Performing rip cuts (longitudinal cuts)
• Performing miter cuts (angled cuts)

Image: A diagram illustrating various cutting applications for the Scheppach HS250L SE Table Saw, including cutting beams, profile boards, and general boards, as well as demonstrating rip cuts and miter cuts.

유지

정기적인 유지관리는 테이블 톱의 수명과 안전한 작동을 보장합니다.

• 청소: After each use, unplug the saw and clean off sawdust and debris from the table, blade guard, and motor housing. Use a brush or compressed air.
• 블레이드 검사: 톱날의 날카로움, 손상 여부 또는 톱니 빠짐 여부를 정기적으로 점검하십시오. 무뎌지거나 손상된 톱날은 즉시 교체하십시오.
• 매끄럽게 하기: 원활한 작동을 위해 전체 설명서에 명시된 대로 움직이는 부품에 주기적으로 윤활유를 바르십시오.
• 전기 코드 : Check the power cord for any signs of damage. Do not use the saw if the cord is frayed or damaged.

문제 해결

이 섹션에서는 테이블 톱에서 발생할 수 있는 일반적인 문제에 대해 설명합니다.

For issues not listed here, please consult the comprehensive troubleshooting guide in the full product manual or contact Scheppach customer support.

명세서

Key technical specifications for the Scheppach HS250L SE Table Saw:

• 모델: HS250L SE
• 제조업체: Scheppach
• 부품 번호: 21682 / 83882
• 전원: 전기 케이블
• 권tage: 230볼트
• 왓tage: 2000와트
• 블레이드 직경: 254mm (XNUMXmm)
• 이빨의 수: 24 (per included blade)
• 최대 90°에서 절단 깊이: 87mm (XNUMXmm)
• 최대 45°에서 절단 깊이: 55mm (XNUMXmm)
• Swiveling Cross Stop: -45° ~ 45°
• Table Height (Ergonomic): 870mm (XNUMXmm)
• 무게: 21.95kg
• 포함된 구성 요소: 2 saw blades, extra table extension left and right, laser cutting guide (incl. batteries)

보증 및 지원

For detailed information regarding warranty coverage, technical support, or spare parts, please refer to the official Scheppach web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

참고: 특정 보증 약관은 지역마다 다를 수 있습니다.