SVS2635

SVS Prime Satellite 5.1 Speaker System User Manual

모델: 2635

제품 끝view

The SVS Prime Satellite 5.1 System is a compact home theater package designed to deliver immersive surround sound. It comprises five Prime Satellite speakers and one SB-1000 Pro Subwoofer, offering a powerful audio experience for small to medium-sized rooms. This system is engineered for pristine clarity, dynamic impact, and deep bass, enhancing both music and movie playback.

SVS Prime Satellite 5.1 Speaker System with Subwoofer

Image: The complete SVS Prime Satellite 5.1 Speaker System, showing five satellite speakers and one SB-1000 Pro Subwoofer.

설치 지침

1. 풀기 및 재고 정리

모든 구성품을 포장에서 조심스럽게 꺼내세요. 모든 구성품이 있는지 확인하세요.

  • 5x SVS Prime Satellite speakers
  • 1x SVS SB-1000 Pro Subwoofer

2. 스피커 배치

Optimal placement is crucial for the best surround sound experience. Consider the following guidelines:

  • 전면 왼쪽/오른쪽 스피커: Place these speakers equidistant from your primary listening position, forming an equilateral triangle with the listener.
  • 센터 스피커: Position the center speaker directly above or below your display, ensuring dialogue is clear and anchored to the screen.
  • 서라운드 왼쪽/오른쪽 스피커: Place these speakers to the sides or slightly behind the main listening position, at or slightly above ear level.
  • 서브 우퍼 : The SB-1000 Pro Subwoofer can be placed in various locations. Experiment with corner placement for maximum bass output or along a wall for more even bass distribution.

Prime Satellite speakers can be mounted on a wall or ceiling using their integrated keyhole bracket, or placed on furniture.

Close-up of SVS Prime Satellite speaker front

이미지: 앞면 view of an SVS Prime Satellite speaker, highlighting the tweeter and woofer.

옆 view of SVS Prime Satellite speaker

이미지: 측면 view of an SVS Prime Satellite speaker, showing its compact design.

3. 시스템 연결

Connect the Prime Satellite speakers to your AV receiver's speaker terminals using appropriate speaker wire. Ensure correct polarity (positive to positive, negative to negative).

Connect the SB-1000 Pro Subwoofer to your AV receiver's LFE (Low-Frequency Effects) output using an RCA cable. If your receiver does not have an LFE output, use the stereo RCA inputs.

SVS SB-1000 Pro Subwoofer speaker level inputs

Image: Close-up of the SVS SB-1000 Pro Subwoofer's speaker level input terminals.

SVS SB-1000 Pro Subwoofer rear panel controls

Image: Rear panel of the SVS SB-1000 Pro Subwoofer, showing various controls and input options.

작동 지침

System Power On/Off

Ensure all components are properly connected before powering on. Power on your AV receiver first, then the SB-1000 Pro Subwoofer. The subwoofer features an auto-on/standby mode that activates when an audio signal is detected.

서브우퍼 제어

The SB-1000 Pro Subwoofer can be controlled via its rear panel or through the dedicated SVS subwoofer DSP smartphone app (available for iOS and Android). The app allows for convenient adjustment of volume, low pass filter, phase, and other advanced settings for optimal integration with your system.

  • 용량: 서브우퍼의 전체 출력 레벨을 조정하십시오.
  • 저역 통과 필터: Sets the upper frequency limit for the subwoofer. This should typically be set based on your main speakers' low-frequency extension and your AV receiver's crossover settings.
  • 단계: Adjusts the phase of the subwoofer output to ensure it aligns acoustically with your main speakers.

For detailed calibration, refer to your AV receiver's instruction manual for speaker setup and room correction procedures.

유지

To ensure the longevity and optimal performance of your SVS Prime Satellite 5.1 Speaker System, follow these maintenance guidelines:

  • 청소: Use a soft, dry, lint-free cloth to gently wipe the speaker cabinets and subwoofer. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
  • 먼지 제거: 부드러운 브러시나 브러시 부착물이 달린 진공청소기를 약한 흡입력으로 사용하여 스피커 그릴과 드라이버를 정기적으로 먼지 제거하십시오.
  • 배치 환경: Avoid placing speakers in direct sunlight, near heat sources, or in areas with high humidity. Ensure adequate ventilation around the subwoofer amp리퍼.
  • 사이: 모든 케이블 연결부를 주기적으로 점검하여 안전하고 부식되지 않았는지 확인하세요.

문제 해결

If you encounter issues with your SVS Prime Satellite 5.1 Speaker System, refer to the following common troubleshooting steps:

문제가능한 원인해결책
스피커에서 소리가 나지 않음Incorrect wiring; Receiver not powered on; Input selection error.Check speaker wire connections for correct polarity. Ensure AV receiver is powered on and correct input is selected.
서브우퍼에서 저음이 나오지 않습니다.Subwoofer not powered on; LFE cable disconnected; Subwoofer volume too low; Crossover settings incorrect.Verify subwoofer power and LFE cable connection. Increase subwoofer volume. Check AV receiver's subwoofer output and crossover settings.
왜곡된 소리Volume too high; Loose connections; Damaged speaker wire.Reduce volume. Check all speaker and subwoofer connections. Inspect speaker wire for damage.
System hum or buzz접지 루프; 케이블 불량.Try connecting all audio components to the same electrical outlet. Replace suspect cables.

If the problem persists after attempting these solutions, please contact SVS customer support.

명세서

Key specifications for the SVS Prime Satellite 5.1 Speaker System:

특징세부 사항
모델명SB 1000 Pro (Subwoofer)
스피커 유형Satellite (Prime Satellite), Subwoofer (SB-1000 Pro)
서라운드 사운드 채널 구성5.1
포함된 구성 요소5x Prime Satellite speakers, 1x SB-1000 Pro Subwoofer
서브우퍼 직경12 인치
서브우퍼 Amplifier 힘325 watts RMS, 820+ watts peak
컨트롤러 유형앱 제어
연결 기술Bluetooth(앱 제어용)
색상블랙 애쉬
제품 치수(서브우퍼)15.75 x 17.72 x 15.75 인치
제품 무게 (서브우퍼)26파운드(11.8킬로그램)
Mounting Type (Satellites)벽 마운트, 천장 마운트

보증 정보

The SVS Prime Satellite 5.1 Speaker System comes with a 한정 보증 provided by SVS. For specific terms, conditions, and duration of the warranty, please refer to the warranty card included with your product or visit the official SVS web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

고객 지원

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact SVS customer support directly. Visit the official SVS web연락처 정보, FAQ 및 추가 리소스를 제공하는 사이트입니다.

제조업체: SVS

© 2025 SVS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.