Renkforce RF-4599772 USB-C Docking Station User Manual

1. 서론

The Renkforce RF-4599772 USB-C Docking Station is a versatile hub designed to expand the connectivity of your USB-C enabled device. It integrates multiple essential ports, including HDMI for video output, USB 3.0 for high-speed data transfer, and a card reader for SD and microSD cards. Additionally, it features an M.2 SSD enclosure for expanding storage and supports USB-C Power Delivery to charge your host device.

주요 특징:

• Integrated M.2 2280 B&M SSD enclosure, supporting up to 2TB storage.
• HDMI output with up to 4K @ 30Hz resolution.
• USB-C Power Delivery (PD) up to 100W.
• Two USB 3.0 ports for high-speed data transfer (up to 5 Gbps).
• Fast data transfer for SD and microSD cards.

2. 패키지 내용

포장을 개봉하신 후 내용물을 확인해 주십시오. 누락된 품목이나 손상된 품목이 있을 경우 판매점에 문의해 주십시오.

• Renkforce RF-4599772 USB-C Docking Station
• SSD 설치용 드라이버 및 나사
• 사용 설명서 (본 문서)

Image: The Renkforce RF-4599772 docking station shown with the included screwdriver and small screws, indicating tools for internal component installation.

3. 제품 오버view

도킹 스테이션의 포트와 기능을 숙지하십시오.

이미지: 위에서 아래로 view of the Renkforce RF-4599772 docking station, clearly displaying the USB-C PD input, SD/MicroSD card slots, HDMI port, and two USB 3.0 ports.

1. USB-C PD 포트: Connect your USB-C power adapter for Power Delivery to the host device.
2. SD 카드 슬롯: Insert standard SD cards for data transfer.
3. MicroSD 카드 슬롯: Insert microSD cards for data transfer.
4. HDMI 포트 : Connect to an external display for video output.
5. USB 3.0 포트(x2): 키보드, 마우스 또는 외장 드라이브와 같은 USB 주변 장치를 연결하세요.
6. USB-C Host Cable: Connects the docking station to your computer's USB-C port.

4. 설정

4.1. SSD Installation (Optional)

The docking station includes an M.2 SSD enclosure. Follow these steps to install an M.2 2280 B&M SSD:

이미지: 내부 view of the docking station's circuit board, highlighting the slot for an M.2 SSD and other integrated components.

1. Carefully open the docking station casing using the provided screwdriver.
2. Locate the M.2 slot on the circuit board.
3. Insert your M.2 2280 B&M SSD into the slot at an angle, then gently push it down.
4. 제공된 나사로 SSD를 고정합니다.
5. Close the docking station casing 안전하게.

4.2. 호스트 장치에 연결하기

1. Connect the integrated USB-C host cable from the docking station to a USB-C port on your computer or laptop.
2. The docking station is plug-and-play and should be recognized automatically by your operating system.

4.3. 주변기기 연결하기

• 전력 공급 : If your host device supports USB-C PD, connect your original USB-C power adapter to the USB-C PD port on the docking station. This will charge your host device through the docking station.
• HDMI 디스플레이: Connect an HDMI cable from the docking station's HDMI port to your external monitor or TV. Ensure your display is set to the correct input source.
• USB 장치: Plug your USB peripherals (e.g., mouse, keyboard, USB flash drive) into the USB 3.0 ports.
• 메모리 카드: Insert SD or microSD cards into their respective slots.

5. 사용 설명서

5.1. Using the HDMI Output

Once connected, your operating system should automatically detect the external display. You can configure display settings (e.g., duplicate, extend, resolution) through your computer's display settings.

• 최대 4K(3840 x 2160) 해상도를 30Hz로 지원합니다.
• For optimal performance, ensure your HDMI cable and display support the desired resolution.

5.2. USB 3.0 포트를 통한 데이터 전송

The two USB 3.0 ports support data transfer speeds up to 5 Gbps. Connect your USB devices and access them as you would directly from your computer.

5.3. Using the Card Reader

Insert your SD or microSD card into the corresponding slot. The card will appear as a removable drive on your computer, allowing you to transfer files.

• 카드가 올바르게, 그리고 완전히 삽입되었는지 확인하십시오.
• Always safely eject the card from your operating system before removing it physically.

5.4. Using the M.2 SSD Enclosure

After installing an M.2 SSD (as per Section 4.1), the SSD will function as an external storage device. It may require initialization and formatting through your operating system's disk management tools before first use.

6. 유지관리

• 도킹 스테이션을 깨끗하고 청결하게 유지하려면 부드럽고 마른 천으로 닦아주세요.
• 액체 세척제나 용제의 사용은 피하세요.
• 본 기기는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
• Do not expose the device to moisture or liquids.

7. 문제 해결

• 화면에 아무것도 표시되지 않습니다.
  • Ensure the USB-C host cable is securely connected to both the docking station and your computer.
  • Verify the HDMI cable is properly connected to the docking station and the display.
  • Check your computer's display settings to ensure the external monitor is detected and configured correctly.
  • 가능하다면 다른 HDMI 케이블이나 디스플레이를 사용해 보세요.
• USB 장치가 인식되지 않음:
  • Ensure the USB-C host cable is firmly connected.
  • Try connecting the USB device to a different USB port on the docking station or directly to your computer.
  • Some high-power USB devices may require external power or a direct connection to the computer.
• SD/MicroSD 카드가 인식되지 않습니다:
  • 카드가 올바른 슬롯에 완전히 삽입되었는지 확인하십시오.
  • Try a different card or connect the card directly to your computer if possible.
  • Check your computer's disk management for the card.
• Power Delivery not working:
  • Ensure your USB-C power adapter is connected to the docking station's USB-C PD port.
  • 호스트 장치가 USB-C Power Delivery를 지원하는지 확인하십시오.
  • Use the original power adapter provided with your host device or a compatible high-wattage USB-C PD charger.

8. 사양

9. 안전 정보

• 장치를 분해하거나 개조하지 마세요.
• 극심한 온도 변화, 높은 습도 및 직사광선을 피하십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• Use only compatible power adapters for Power Delivery.
• 천둥번개가 칠 때나 장기간 사용하지 않을 때는 기기의 전원을 차단하십시오.

10. 보증 및 지원

Renkforce products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Renkforce website. Please have your model number (RF-4599772) and proof of purchase ready when contacting support.

For the latest drivers and software updates, please visit the manufacturer's web대지.