1. 서론
The DeltaTrak 15051 Ultra Fast Fold Thermometer is engineered for rapid and accurate temperature measurements, making it suitable for demanding applications such as food operations. Its design prioritizes speed, reliability, and flexibility to meet stringent safety standards. This manual provides essential information for the proper use and maintenance of your thermometer.
2. 안전 정보
- 온도계 전체를 물에 담그지 마십시오. The probe is waterproof, but the main unit should not be submerged.
- 온도계는 어린이의 손이 닿지 않는 곳에 보관하십시오.
- Handle the stainless-steel probe with care as it has a sharp tip.
- 온도계를 작동 범위(-58°F ~ 572°F / -50°C ~ 300°C)를 벗어난 극한 온도에 노출시키지 마십시오.
- Always clean the probe before and after each use to prevent cross-contamination.
3. 패키지 내용
- 1 x DeltaTrak 15051 Ultra Fast Fold Thermometer
- 1 x 배터리(사전 설치됨)
4. 제품 오버view
The DeltaTrak 15051 features a large LCD display, a foldable stainless-steel probe, and intuitive buttons for various functions.
Image: DeltaTrak 15051 Ultra Fast Fold Thermometer. The thermometer is white and blue, with a digital display showing '190.6' and buttons for °F/°C, CAL, HOLD, MIN, and MAX. The stainless steel probe is extended from the main unit.
주요 구성 요소:
- Foldable Stainless-Steel Probe: Adjustable from 0° to 180° for flexible positioning.
- LCD 디스플레이: Large, easy-to-read display for temperature readings.
- °F/°C 버튼: Toggles between Fahrenheit and Celsius units.
- CAL 버튼: For calibration (refer to calibration section for details).
- 홀드 버튼: 현재 온도 표시값을 화면에 고정합니다.
- 최소/최대 버튼: Displays the minimum and maximum temperatures recorded during a measurement session.
5. 설정
The DeltaTrak 15051 thermometer comes with a pre-installed battery. No initial setup is typically required beyond removing any protective packaging.
- 온도계를 포장에서 조심스럽게 꺼내세요.
- Unfold the stainless-steel probe to activate the thermometer. The display will turn on automatically.
- Ensure the display shows a reading. If not, check the battery compartment.
6. 사용 설명서
6.1. 체온 측정
- 온도계를 켜려면 탐침을 펼치세요.
- Insert the stainless-steel probe into the center of the food or liquid being measured. Ensure the probe tip is fully immersed and not touching the bottom or sides of the container.
- Wait for the reading on the LCD display to stabilize. The thermometer provides an almost instantaneous response, typically under 4 seconds.
- 표시된 온도를 읽으세요.
- To turn off the thermometer, fold the probe back into its housing.
6.2. 온도 단위 변환 (°F/°C)
를 누르세요 화씨/섭씨 button located on the front of the thermometer to switch between Fahrenheit and Celsius temperature scales.
6.3. Using the HOLD Function
를 누르세요 잡고 있다 button to freeze the current temperature reading on the display. This is useful when you need to remove the probe from the item to read the temperature more clearly. Press 잡고 있다 다시 실시간 온도 측정을 재개합니다.
6.4. Using the MIN/MAX Function
를 누르세요 MIN / MAX button to cycle through the minimum and maximum temperatures recorded since the thermometer was last turned on or the MIN/MAX memory was cleared. To clear the MIN/MAX memory, hold the MIN / MAX button for a few seconds until the display resets.
6.5. Calibration (CAL)
The thermometer is factory calibrated. If recalibration is necessary, refer to specific industry standards or contact DeltaTrak support for guidance. Typically, calibration involves placing the probe in an ice bath (0°C / 32°F) and adjusting the reading using the 칼 필요한 경우 버튼을 클릭하세요.
7. 유지관리 및 관리
- 청소: The probe can be cleaned with warm soapy water or an antibacterial wipe. The main unit should be wiped clean with a damp 옷감. Do not wash the entire unit under running water or immerse it.
- 저장: Store the thermometer with the probe folded in a clean, dry place when not in use.
- 배터리 교체: When the display becomes dim or the thermometer does not turn on, it's time to replace the battery. The thermometer uses a standard button cell battery. Open the battery compartment, replace the old battery with a new one of the same type, and close the compartment securely.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 온도계가 켜지지 않습니다. | 배터리가 소진되었거나 잘못 설치되었습니다. | Replace the battery or ensure it is correctly inserted. |
| 부정확한 판독값. | Probe not fully inserted; probe tip touching container; thermometer needs calibration. | Ensure proper probe placement. If issues persist, consider calibration or contact support. |
| 디스플레이가 어둡습니다. | 배터리가 부족합니다. | 배터리를 교체하세요. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 15051 |
| 온도 범위 | -58°F ~ 572°F / -50°C ~ 300°C |
| 응답 시간 | 4초 이내 |
| 디스플레이 유형 | 액정표시장치 |
| 프로브 재질 | 스테인리스 스틸 |
| 특징 | 접이식 프로브 |
| 전원 | Battery Powered (Battery included) |
| 제품 크기(LxWxH) | 17 x 6 x 3cm |
| 겉감 소재 | 플라스틱 |
| 제품 관리 지침 | 손세탁만 가능 |
10. 보증 및 지원
For warranty information and technical support, please refer to the official DeltaTrak web사이트에서 확인하거나 고객 서비스에 직접 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.