소개
This manual provides essential information for the proper setup, operation, and maintenance of your Hormann 4511585 HSE 4 BS Hand Transmitter. This device is designed for controlling Hormann garage door operators and gate operators. Please read these instructions carefully before using the hand transmitter.
이미지: 앞면 view of the Hormann HSE 4 BS Hand Transmitter, featuring its glossy carbon finish and four control buttons.
안전 지침
- Keep the hand transmitter away from children to prevent accidents.
- Operate the hand transmitter only when the garage door or gate is within your line of sight and clear of obstructions.
- Do not expose the hand transmitter to extreme temperatures, moisture, or direct sunlight.
- This device is intended for use in dry environments only.
설정
1. 배터리 설치
The Hormann HSE 4 BS Hand Transmitter comes with a pre-installed CR2032 lithium button cell battery. If replacement is needed, follow these steps:
- Locate the battery compartment on the back of the hand transmitter.
- Carefully open the compartment cover using a small screwdriver or coin.
- 기존 CR2032 배터리를 제거하세요.
- Insert a new 3V CR2032 lithium button cell battery with the positive (+) side facing up.
- 배터리 덮개를 단단히 닫으세요.
이미지: 후면 view of the hand transmitter, showing the battery compartment and key ring attachment point.
2. Programming the Hand Transmitter
The HSE 4 BS hand transmitter supports both BiSecur radio and 868 MHz fixed code systems. The programming procedure depends on your specific Hormann operator model. Refer to your garage door or gate operator's instruction manual for detailed programming steps. Generally, the process involves:
- Activating the programming mode on your operator.
- Pressing a button on the new hand transmitter to transmit the signal.
- Confirming the successful pairing on the operator.
For BiSecur systems, the hand transmitter can copy codes from an existing BiSecur hand transmitter. For 868 MHz fixed code systems, it can also be programmed directly to the operator.
Operating the Hand Transmitter
The Hormann HSE 4 BS Hand Transmitter features four buttons, allowing control of up to four different functions or operators.
- 활성화: Press the desired button firmly to send a signal to your garage door or gate operator.
- 범위: Ensure you are within the operational range of your operator. Obstacles can reduce the effective range.
- 다양한 기능: Each button can be programmed independently to control different doors, gates, or lighting systems compatible with your Hormann operator.
이미지: 클로즈업 view of the hand transmitter's control buttons, indicating its multi-function capability.
유지
- 청소: Clean the hand transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- 배터리 교체: Replace the CR2032 battery when the transmission range decreases significantly or the indicator light (if present) no longer illuminates. Refer to the "Battery Installation" section for instructions.
- 저장: Store the hand transmitter in a dry place, away from extreme temperatures and direct sunlight.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Hand transmitter does not operate the door/gate. |
|
|
| 작동 범위가 감소했습니다. |
|
|
명세서
- 모델: 4511585 (HSE 4 BS)
- 상표: 호르만
- 빈도: 868 MHz (BiSecur and fixed code compatible)
- 버튼 수: 4
- 배터리 유형: 3V Lithium Button Cell, CR2032 (1 included)
- 치수(길이 x 너비 x 높이): 70 x 28 x 14mm(약 2.76 x 1.10 x 0.55인치)
- 무게: Approximately 56 grams (including battery)
- 재료: Glossy plastic with chrome-plated die-cast zinc caps
- 보호 등급: 건조한 실내에서만 사용 가능
- 온도 범위: 0°C ~ +50°C(32°F ~ 122°F)
- 호환 장치: Hormann garage door operators, Hormann gate operators
- 연결 기술 : 고주파
- 원산지: 독일
보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your Hormann garage door or gate operator, or visit the official Hormann web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.
제조업체: 호르만
Web대지: www.hormann.com (Please note: This is a generic link. Refer to your regional Hormann web(특정 지원을 위한 사이트입니다.)