SHARP Digital Alarm Clock with AccuSet

소개

The SHARP Digital Alarm Clock with AccuSet is designed for effortless timekeeping. Featuring automatic time setting, a clear LED display, and user-friendly controls, this clock is ideal for any bedroom. Its AccuSet technology ensures the time is always accurate, eliminating the need for manual adjustments, making it perfect for seniors, children, or anyone seeking a hassle-free alarm clock solution.

그림 1: 전면 view of the SHARP Digital Alarm Clock with green LED display.

주요 특징

• AccuSet Automatic Time Set: The clock is pre-programmed to automatically set the correct time, removing the need for manual adjustments. Simply select your time zone.
• Quick Daylight Savings Time (DST) Adjustment: A convenient switch allows for easy adjustment for Daylight Savings Time (+1 hour) or Standard Time (-1 hour).
• High/Low Dimmer Control: Adjust the brightness of the LED display to your preference, ensuring comfortable view낮이든 밤이든.
• 배터리 백업 : A pre-installed CR2032 button cell battery provides backup for time settings during power outages, ensuring continuous accuracy.
• 시간대 선택: Easily select your local time zone from the options provided at the bottom of the clock.

Figure 2: Diagram illustrating the key features and functionalities of the alarm clock.

설치 가이드

1. 짐 풀기: Carefully remove the alarm clock from its packaging.
2. Battery Installation (Pre-installed): The CR2032 button cell battery for backup is pre-installed in a screw-secured cabinet at the bottom of the clock. This battery is designed to last for several years. No immediate action is required for initial setup.
3. 시간대 선택: Before plugging in the clock, locate the time zone selection switch at the bottom of the unit. Select your correct time zone (e.g., EST, CST, MST, PST). The default time zone is Eastern Standard Time.
4. 전원 연결: Plug the clock into an approved electrical source. The AccuSet feature will automatically program the correct time based on your selected time zone.
5. Daylight Savings Time (DST) Adjustment: If applicable, slide the DST switch at the bottom of the clock to "ON" to add one hour (+1 hr) for Daylight Savings Time. For Standard Time, slide the switch to "OFF" to subtract one hour (-1 hr).

Figure 3: Top panel controls for setting time, alarm, and adjusting display.

작동 지침

알람 설정

1. 를 누르세요 경보 button once. The alarm time will appear on the display.
2. 알람 시간이 표시된 상태에서 버튼을 누르세요. 시간 버튼을 눌러 알람 시간을 조정합니다.
3. 를 누르세요 분 버튼을 눌러 알람 분을 조정하세요.
4. 알람을 활성화 또는 비활성화하려면 버튼을 누르십시오. 알람 ON / OFF button. An alarm indicator light (usually a small LED) will illuminate when the alarm is active.
5. To return to the current time display, press the 시간 button or wait a few seconds for it to revert automatically.

스누즈 기능 사용

알람이 울리면 큰 버튼을 누르세요 선잠 button located on the top of the clock. This will temporarily silence the alarm for a set period (typically 9 minutes), allowing for extra rest. The alarm will sound again after the snooze period ends.

Adjusting Display Brightness (Dimmer Control)

The clock features a High/Low dimmer control to adjust the display brightness. Locate the DIMMER HI/LO button on the top panel. Press this button to toggle between high and low brightness settings to suit your environment and preference.

Figure 4: Illustration of the High & Low Display Dimmer Control.

유지

• 청소: To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• 배터리 교체: The CR2032 backup battery is designed for long-term use. If the clock loses time during a power outage after several years, it may be time to replace the battery. This is located in a screw-secured compartment at the bottom of the clock.
• 놓기: Place the clock on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.

문제 해결

명세서

그림 5: 제품 치수를 쉽게 참조할 수 있도록 표시했습니다.

보증 및 지원

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Sharp web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.