CHACON 54018 Analogue Timer Sockets Instruction Manual

1. 서론

This manual provides essential information for the safe and efficient use of your CHACON 54018 Analogue Timer Sockets. Please read these instructions carefully before installation and operation, and retain them for future reference. The CHACON 54018 is designed to automate the switching of electrical appliances on and off at pre-set times.

2. 안전 정보

• 전기 안전: Always ensure the timer is unplugged before cleaning or making any adjustments. Do not exceed the maximum load rating specified for the timer.
• 실내에서만 사용 가능: This product is designed for indoor use in dry conditions. Do not expose to water, moisture, or extreme temperatures.
• 어린이들: 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
• 손상: Do not use the timer if it appears damaged. Contact customer support for assistance.
• 통풍: Ensure adequate ventilation around the timer when in use.

3. 패키지 내용

패키지에는 다음이 포함됩니다.

• 3 x CHACON 54018 Analogue Timer Sockets
• 사용 설명서(본 문서)

4. 제품 오버view

Each CHACON 54018 Analogue Timer Socket features a rotating dial for setting time and programming pins for scheduling on/off cycles. It is designed for simple and reliable operation.

이미지 1: 이상view of the three CHACON 54018 Analogue Timer Sockets. Each unit consists of a timer mechanism at the top and a standard electrical socket at the bottom, allowing for automated control of connected devices.

5. 설정

1. 풀다: Carefully remove the timer sockets from their packaging.
2. 초기 요금(해당되는 경우): Some analogue timers may require a brief period plugged into a live socket to charge an internal battery for timekeeping. Refer to specific markings on the device if present.
3. 현재 시간 설정: Rotate the outer dial of the timer clockwise until the current time aligns with the arrow or marker on the timer's face. The dial typically represents a 24-hour cycle.

6. 사용 설명서

6.1 켜짐/꺼짐 시간 설정

1. 핀 식별: The timer dial is surrounded by small, push-down pins. Each pin typically represents a 15 or 30-minute interval.
2. Program ON Periods: Push down the pins corresponding to the time periods you want the connected appliance to be ON.
3. Program OFF Periods: Leave the pins in the UP position for the time periods you want the connected appliance to be OFF.
4. 기기 연결: Plug the appliance you wish to control into the timer socket.
5. Plug Timer In: Insert the timer socket into a wall outlet.
6. 타이머 활성화: Ensure the manual override switch (if present) is set to the 'Timer' or 'Auto' position.

6.2 수동 오버라이드

Most analogue timers include a manual override switch, often located on the side or front. This switch allows you to bypass the timer settings and keep the appliance permanently ON or OFF, or to activate the timer function. Refer to the markings on your specific unit for switch positions (e.g., 'ON', 'OFF', 'TIMER' or 'AUTO').

7. 유지관리

• 청소: 청소하기 전에 타이머의 전원 플러그를 뽑으십시오. 외부를 부드럽고 마른 천으로 닦으십시오. 액체 세척제나 연마제를 사용하지 마십시오.
• 저장: Store the timers in a cool, dry place when not in use.
• 점검: Periodically inspect the timer and its cord for any signs of damage.

8. 문제 해결

• 타이머가 켜지거나 꺼지지 않음:
  • Check if the timer is correctly plugged into a live wall outlet.
  • Ensure the appliance plugged into the timer is working correctly.
  • Verify that the pins are pushed down for the desired ON periods and up for OFF periods.
  • Confirm the manual override switch is set to 'Timer' or 'Auto'.
  • 시계 다이얼에 현재 시간이 정확하게 설정되어 있는지 확인하십시오.
• 타이머 다이얼이 회전하지 않음:
  • Ensure the timer is plugged into a live power source. Analogue timers require power to operate their internal clock mechanism.

9. 사양

10. 보증 및 지원

CHACON products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided at the point of purchase or visit the official CHACON web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.