1. 소개 및 이상view
The ASRock B560 PRO4 is a high-performance ATX motherboard designed for Intel 10th and 11th Generation Core processors, utilizing the LGA1200 socket. It supports DDR4 memory, PCIe 4.0, and offers a robust set of features for building a reliable personal computer system. This manual provides essential information for proper installation, configuration, and maintenance of your motherboard.
2. 설정 및 설치
2.1 설치 전 체크리스트
Before beginning installation, ensure you have the following components:
- ASRock B560 PRO4 Motherboard
- Compatible Intel LGA1200 CPU (10th or 11th Gen)
- DDR4 RAM 모듈
- CPU 쿨러
- 그래픽 카드 (내장 그래픽을 사용하지 않는 경우)
- 저장 장치(M.2 SSD, SATA SSD/HDD)
- 전원 공급 장치(PSU)
- 컴퓨터 케이스
- Screwdriver and anti-static wrist strap
2.2 마더보드 레이아웃
주요 구성 요소와 커넥터를 식별하려면 마더보드의 레이아웃을 숙지하세요.
그림 1: 상향식 view of the ASRock B560 PRO4 motherboard, highlighting the CPU socket, RAM slots, PCIe slots, and M.2 heatsinks.
그림 2: 각도 view of the ASRock B560 PRO4 motherboard, showing the various components from a different perspective.
Figure 3: Close-up of the ASRock B560 PRO4 motherboard's rear I/O panel, displaying USB ports, Ethernet port, audio jacks, HDMI, and DisplayPort outputs.
2.3 CPU 설치
Carefully open the CPU socket lever. Align the triangular mark on your Intel LGA1200 CPU with the corresponding mark on the socket. Gently place the CPU into the socket without forcing it. Close the lever to secure the CPU. Install the CPU cooler according to its manufacturer's instructions.
2.4 RAM 설치
Open the clips on both ends of the DDR4 memory slots. Align the notch on the RAM module with the key in the slot. Press down firmly on both ends of the module until the clips snap into place. For optimal performance, install modules in the recommended dual-channel configuration (refer to the motherboard manual for specific slot pairings).
2.5 저장장치 설치
M.2 SSD: Locate the M.2 slots. Remove the M.2 heatsink/cover if present. Insert the M.2 SSD into the slot at an angle, then gently push it down and secure it with the provided screw. Reattach the heatsink if applicable. The B560 PRO4 features two M.2 slots, with one supporting PCIe Gen4 for 11th Gen Intel CPUs.
SATA 드라이브: Connect SATA data cables from your SSDs/HDDs to the SATA 6Gb/s ports on the motherboard. Connect SATA power cables from your PSU to the drives.
2.6 확장 카드 설치
Insert your graphics card or other PCIe expansion cards into the appropriate PCIe slots. The B560 PRO4 includes one PCIe 4.0 x16 slot (for 11th Gen CPUs), one PCIe 3.0 x16 slot, and two PCIe 3.0 x1 slots. Ensure the card is fully seated and secured with a screw to the case.
2.7 전원 연결
Connect the 24-pin ATX power connector from your PSU to the main power socket on the motherboard. Connect the 8-pin (or 4+4-pin) CPU power connector to the CPU power socket near the CPU.
2.8 전면 패널 연결
Connect the front panel headers for USB ports, audio jacks, power button, reset button, and LED indicators to their respective pins on the motherboard. Refer to the motherboard's detailed diagram for correct pin assignments.
3. 사용 설명서
3.1 최초 부팅 및 BIOS/UEFI 접근
After completing all hardware installations, connect your monitor, keyboard, and mouse. Power on your system. During the boot process, repeatedly press the 삭제 or F2 key to enter the BIOS/UEFI setup utility. Here you can configure boot order, system time, and other advanced settings.
3.2 드라이버 설치
Once your operating system is installed, install the necessary drivers for the motherboard's components (chipset, audio, LAN, etc.). These drivers are typically provided on a support CD or can be downloaded from the official ASRock web사이트 (www.asrock.com).
4. 유지관리
4.1 청소
컴퓨터 내부를 정기적으로 청소하여 먼지 축적을 방지하세요. 먼지가 쌓이면 과열 및 성능 저하를 유발할 수 있습니다. 압축 공기를 사용하여 팬, 방열판 및 기타 부품의 먼지를 제거하십시오. 청소하기 전에 시스템 전원을 끄고 전원 케이블을 뽑으십시오.
4.2 BIOS/UEFI 업데이트
ASRock periodically releases BIOS/UEFI updates to improve stability, add new features, or support new hardware. Download updates from the official ASRock website and follow the provided instructions carefully. Incorrect BIOS updates can damage your motherboard.
5. 문제 해결
5.1 일반적인 문제
- 전원 없음: Check all power connections (24-pin ATX, 8-pin CPU, PSU switch, wall outlet).
- 화면 표시 안 됨 (POST 없음): Ensure RAM modules are properly seated. Reseat the graphics card. Check monitor connections. Try booting with minimal components (CPU, one RAM stick, GPU).
- 시스템 불안정성: Verify CPU and RAM compatibility. Check for overheating. Ensure drivers are up to date.
- 운영 체제가 부팅되지 않음: Check boot order in BIOS/UEFI. Verify storage device connections.
For more detailed troubleshooting, refer to the comprehensive manual available on the ASRock web사이트 또는 ASRock 기술 지원팀에 문의하세요.
6. 사양
Below are the key specifications for the ASRock B560 PRO4 Motherboard:
| 특징 | 사양 |
|---|---|
| 상표 | 애즈락 |
| 모델명 | B560 PRO4 |
| CPU 소켓 | LGA 1200 |
| 호환 프로세서 | 10세대 인텔 코어, 11세대 인텔 코어 |
| 칩셋 유형 | 인텔 B560 |
| RAM 메모리 기술 | DDR4 |
| 사용 가능한 메모리 슬롯 | 4 |
| Ram Memory Maximum Size | 128GB (XNUMX기가바이트) |
| 메모리 클럭 속도 | 4800 MHz (Max OC) |
| 그래픽 카드 인터페이스 | PCI 익스프레스 |
| Total PCIe Ports | 4 (1x PCIe 4.0 x16, 1x PCIe 3.0 x16, 2x PCIe 3.0 x1) |
| 총 SATA 포트 수 | 6 |
| M.2 슬롯 | 2 |
| 총 USB 포트 | 10 (Rear: 2x USB 3.2 Gen2, 4x USB 3.2 Gen1, 2x USB 2.0; Front: 1x USB 3.2 Gen1 Header, 2x USB 2.0 Headers) |
| 이더넷 포트 수 | 1 (Realtek 2.5 Gigabit LAN) |
| HDMI 포트 총 개수 | 1 |
| 디스플레이포트 | 1 |
| 오디오 | Realtek ALC897 오디오 코덱 |
| 폼 팩터 | 에이티엑스 |
| 품목 무게 | 2.2 파운드 |
7. 보증 정보
The ASRock B560 PRO4 Motherboard comes with a 3년 한정 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms, conditions, and claim procedures, please visit the official ASRock web사이트를 방문하거나 가까운 판매점에 문의하세요.
8. 지원
For technical assistance, driver downloads, BIOS updates, and frequently asked questions, please visit the official ASRock support page:
ASRock 고객 서비스 센터에 직접 문의하실 수도 있습니다. web추가 지원은 사이트를 참조하세요.