Feit Electric GLP17/B/TABLE/14WLED Tabletop 17" LED Grow Light User Manual

중요 안전 지침

경고: To avoid electric shock, always unplug the unit before cleaning or performing any maintenance. Do not immerse the unit in water. Do not operate with a damaged cord or plug. For indoor use only.

• 이 제품을 사용하기 전에 모든 지침을 읽으세요.
• LED 조명을 직접 쳐다보지 마십시오.
• 제품을 안정적이고 평평한 표면에 놓으십시오.
• 물과 습기를 멀리하세요.
• Do not attempt to modify or repair the unit yourself. Contact qualified service personnel.

패키지 내용

조립하기 전에 모든 구성 요소가 있는지 확인하세요.

• 1x LED Grow Light Fixture (Integrated with stand and base)
• 1x 전원 어댑터
• 사용자 설명서 1부 (본 문서)

Image: The Feit Electric Tabletop LED Grow Light, showing the integrated light bar, stand, and base.

설정 및 설치

The Feit Electric GLP17/B/TABLE/14WLED grow light is designed for easy tabletop placement and requires minimal assembly.

1. 풀다: 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. 놓기: Place the grow light on a stable, flat surface where your plants will receive adequate light. Ensure there is enough space around the unit for proper ventilation.
3. 전원 연결: Insert the power adapter into the power port on the back or side of the grow light base. Plug the other end of the power adapter into a standard electrical outlet (120V AC).
4. 위치: Position the light approximately 6-12 inches above the plant canopy, adjusting as plants grow.

Image: The Feit Electric Grow Light illuminating a potted plant, demonstrating typical usage.

작업

The grow light features touch controls for power and spectrum mode selection.

전원 켜기/끄기

• 켜려면: Gently touch the power button located on the base of the unit. The light will illuminate in the last used spectrum mode.
• 끄기: Touch the power button again.

Spectrum Modes

This grow light offers three distinct spectrum modes optimized for different plant growth stag에스:

1. Seeding Mode: Ideal for germination and young seedlings. Provides a spectrum rich in blue light to encourage strong root development and compact growth.
2. Vegetation Mode: Suitable for the vegetative growth phase, promoting lush foliage and overall plant health. This mode typically balances blue and red light.
3. Flowering Mode: Designed to support the flowering and fruiting stages, with a spectrum emphasizing red light to stimulate bloom production.

모드를 변경하려면: With the light on, repeatedly touch the mode selection button to cycle through the Seeding, Vegetation, and Flowering modes. The light will visually change to indicate the selected spectrum.

Image: Detailed charts illustrating the spectral output and horticultural application for Seeding, Vegetation, and Flowering modes.

유지

정기적인 유지 관리는 식물 재배용 조명의 최적 성능과 수명 연장을 보장합니다.

• 청소: Disconnect the power before cleaning. Use a soft, dry cloth to wipe down the light fixture and base. Do not use abrasive cleaners or solvents.
• 먼지 제거: Periodically remove any dust accumulation from the LED panel to maintain light output efficiency.
• 저장: If storing the unit for an extended period, unplug it, clean it, and store it in a cool, dry place.

문제 해결

If the problem persists after trying these solutions, please contact Feit Electric customer support.

명세서

Image: Diagram showing the dimensions of the Feit Electric Tabletop LED Grow Light: 17 inches height, 9.84 inches depth, 7 inches width.

보증

This product comes with a manufacturer's warranty. Please refer to the warranty information provided with your purchase or visit the official Feit Electric web보증 범위 및 조건에 대한 자세한 내용은 해당 사이트를 참조하십시오.

Note: Protection plans may be available for extended coverage. These are separate from the manufacturer's warranty.

고객 지원

For technical assistance, replacement parts, or any questions regarding your Feit Electric GLP17/B/TABLE/14WLED grow light, please contact Feit Electric customer support:

• Web대지: www.feitelectric.com
• 핸드폰: 공식 참조 web현재 연락처 정보는 사이트에서 확인하세요.