HOCO S11

HOCO S11 무선 헤드셋 사용 설명서

모델 : S11

소개

Thank you for choosing the HOCO S11 Wireless Headset. This manual provides detailed instructions on how to set up, operate, and maintain your headset to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

제품 끝view

The HOCO S11 Wireless Headset features Bluetooth 5.0 connectivity, a digital display charging case, touch controls, and noise-canceling capabilities for an enhanced audio experience.

구성 요소

  • Two Wireless Earbuds (Left and Right)
  • 디지털 디스플레이 충전 케이스
  • Protective Case (Included)
  • 충전 케이블(일반적으로 USB-C)
  • 사용 설명서(본 문서)
HOCO S11 Wireless Headset with charging case and earbuds

Image: The HOCO S11 wireless earbuds removed from their charging case, showcasing the digital display on the case.

설정

1. 충전 케이스 충전하기

  1. 충전 케이블을 케이스 충전 포트에 연결하세요.
  2. 케이블의 다른 쪽 끝을 USB 전원 어댑터(포함되지 않음)나 컴퓨터의 USB 포트에 연결합니다.
  3. The digital display on the case will show the current battery level during charging.
  4. Charge the case fully before first use.
HOCO S11 Charging Case with digital battery display showing 92%

이미지: 앞면 view of the HOCO S11 charging case, displaying "92" on its digital screen, indicating battery percentage.

2. 이어버드 충전하기

  • 이어버드를 충전 케이스의 해당 슬롯에 넣습니다.
  • Ensure the earbuds are properly seated; they will automatically begin charging.
  • The digital display on the case may show individual earbud charging status or a combined status.
HOCO S11 Charging Case open with earbuds inside, showing charging indicator

Image: The HOCO S11 charging case open, with both earbuds placed inside. A green light indicates charging status.

3. 장치와 페어링

  1. 충전 케이스를 여세요. 이어버드가 자동으로 페어링 모드로 진입합니다.
  2. 기기(스마트폰, 태블릿 등)에서 Bluetooth 설정으로 이동하세요.
  3. 검색 available devices and select "HOCO S11" from the list.
  4. 연결되면 확인음이 들리고 이어버드를 사용할 준비가 됩니다.
  5. 기기에서 Bluetooth가 활성화되어 있는 경우, 이어버드를 케이스에서 꺼내면 마지막으로 페어링된 기기에 자동으로 다시 연결됩니다.

작동 지침

The HOCO S11 earbuds feature touch controls for various functions.

터치 컨트롤

기능행동
음악 재생/일시 정지양쪽 이어버드를 한 번 탭하세요.
다음 트랙오른쪽 이어버드를 두 번 탭하세요.
이전 트랙왼쪽 이어버드를 두 번 탭하세요.
전화 받기/종료하기수신 전화나 통화 중일 때 한쪽 이어버드를 한 번 탭합니다.
전화 거부전화가 오는 동안 한쪽 이어버드를 2초간 길게 누르세요.
음성 지원 활성화양쪽 이어버드를 세 번 탭하세요.

소음 제거

The HOCO S11 features noise-canceling technology to reduce ambient sound. This feature is typically active by default or can be toggled via specific touch controls (refer to the table above if a specific control is available, otherwise assume automatic).

유지

  • 청소: 부드럽고 마른 보풀 없는 천을 사용하여 이어버드와 충전 케이스를 닦으세요. 강한 화학 물질이나 연마재를 사용하지 마세요.
  • 저장: 사용하지 않을 때는 이어버드를 충전 케이스에 보관하여 보호하고 충전 상태를 유지하세요. 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
  • 물 노출: The earbuds are not waterproof. Avoid exposure to water, moisture, or sweat to prevent damage.

문제 해결

문제해결책
이어폰이 페어링되지 않음
  • 이어폰이 충전되어 있는지 확인하세요.
  • 기기의 Bluetooth를 껐다가 켜세요.
  • Forget "HOCO S11" from your device's Bluetooth list and try pairing again.
  • 이어버드를 케이스에 다시 넣고 닫았다가 다시 열어 페어링 모드를 재설정하세요.
하나의 이어폰만 작동
  • 양쪽 이어버드가 모두 충전되어 있는지 확인하세요.
  • 이어버드 두 개를 모두 충전 케이스에 넣고 뚜껑을 닫은 후 몇 초간 기다렸다가 뚜껑을 열고 이어버드를 꺼내세요.
  • 이어버드를 재설정해 보세요(재설정 방법이 있으면 해당 방법을 참조하고, 없으면 다시 페어링해 보세요).
볼륨이 낮거나 음질이 좋지 않음
  • 기기와 이어버드 모두의 볼륨을 조절하세요.
  • 이어폰이 깨끗하고 이물질이 없는지 확인하세요.
  • 다른 무선 장치의 간섭을 확인하십시오.
  • 안정적인 Bluetooth 연결을 보장하세요.
충전 케이스가 충전되지 않음
  • 충전 케이블과 전원 어댑터를 확인하세요.
  • 충전 포트가 깨끗하고 이물질이 없는지 확인하세요.
  • 다른 충전 케이블이나 전원을 사용해 보세요.

명세서

특징세부 사항
모델S11
상표호코
연결성블루투스 5.0, 무선
특별 기능Noise Canceling, Fast Charging, Digital Display Charging Case, Touch Control
포함된 구성 요소Protective Case, Earbuds, Charging Case
재료플라스틱
품목 무게240g
패키지 크기18 x 15.1 x 4.9cm
배터리2 제품별 배터리 필요(포함)

보증 및 지원

For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official HOCO web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

참고: 구체적인 보증 조건은 지역 및 소매업체에 따라 다를 수 있습니다.

© 2023 HOCO. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.