호프트로닉 5430367

HOFTRONIC Bari Dimmable LED Recessed Spotlights (3-pack)

모델: 5430367

상표: 호프트로닉

1. 서론

Thank you for choosing HOFTRONIC Bari Dimmable LED Recessed Spotlights. This set of three stainless steel spotlights is designed for versatile indoor and outdoor use, featuring a GU10 5-watt 6000K dimmable LED light source and an IP65 waterproof rating. This manual provides essential information for safe installation, operation, and maintenance of your product.

A modern bathroom with three recessed spotlights installed in the ceiling, illuminating the space.

Image 1.1: HOFTRONIC Bari Dimmable LED Recessed Spotlights in a modern bathroom setting.

2. 안전 정보

  • 설치, 유지보수 또는 전구 교체 전에는 항상 전원을 차단하십시오.
  • 안전과 지역 전기 규정 준수를 위해 설치는 자격을 갖춘 전기 기술자가 수행해야 합니다.
  • 공급 볼륨을 확인tage (230 Volts) matches the product's requirements.
  • Do not modify the product in any way. Unauthorized modifications may lead to electric shock, fire, or product damage.
  • Avoid direct exposure to the light source for extended periods.
  • This product is IP65 rated, making it suitable for both dry and humid environments, including bathrooms and outdoor covered areas.

3. 패키지 내용

패키지에는 다음이 포함됩니다.

  • 3 x HOFTRONIC Bari Recessed Spotlights (Stainless Steel)
  • 3 x GU10 5 Watt 6000K Dimmable LED Bulbs

4. 사양

특징사양
모델 번호5430367
상표호프트로닉
제품 크기(L x W x H)8.5 x 8.5 x 8cm
품목 무게5킬로그램(세트당)
재료알류미늄
색온도6000K(쿨 화이트)
전원교류/직류
광원 유형LED(GU10)
광원의 수3
권tage230 볼트
왓tage전구당 5와트
광효율성전구당 450루멘
Installation Depth (with bulb)80mm (XNUMXmm)
Cut-out Size (Saw Size)직경 70mm
외경직경 85mm
IP 등급IP65(방수 및 방진)
A close-up of a recessed spotlight with water splashing around it, illustrating its IP65 water and dust resistant rating.

Image 4.1: IP65 Water and Dust Resistant Rating.

A close-up of a recessed spotlight emitting light, highlighting its dimmable and energy-efficient features.

Image 4.2: High Performance and Dimmable GU10 LED Spot.

5. 설정 및 설치

These spotlights are designed for easy 'Plug and Play' installation, requiring no specialized technical knowledge. However, for electrical safety, professional installation is recommended.

설치 단계:

  1. 설치 영역 준비: 설치 구역의 전원이 주 차단기에서 차단되었는지 확인하십시오.
  2. Create the Cut-out: Using a suitable tool, create a circular cut-out in the ceiling or mounting surface with a diameter of 직경 70mm.
  3. 배선 연결: Open the junction box. Connect the main electrical wires to the terminals:
    • L(라이브): Brown or Red wire
    • N (중립): Blue or Black wire
    • E (Earth): 녹색 및 노란색 와이어
    Ensure all connections are secure. Close the junction box.
  4. 전구 삽입: Carefully insert the GU10 LED bulb into the spotlight fitting.
  5. 스포트라이트를 켜세요: Fold the spring clips on the side of the spotlight upwards. Insert the spotlight into the Ø 70 mm cut-out. The springs will automatically secure the spotlight in place. The required installation depth with the bulb is 80mm (XNUMXmm).
  6. 복원력 : Once all spotlights are securely installed, restore power at the main circuit breaker.
A disassembled view of the recessed spotlight showing the spring clips for installation, with measurements for installation depth.

Image 5.1: Easy Installation with Spring Clips and Dimensions.

A technical diagram illustrating the dimensions of the junction box, cable length, GU10 fitting, and the spotlight's cut-out and outer diameters.

Image 5.2: Technical Diagram with Dimensions.

A detailed image showing the internal wiring of the junction box (N, E, L terminals) and the GU10 lamp 보유자.

Image 5.3: Junction Box and GU10 Fitting Details.

6. 사용 설명서

Once installed and power is restored, the spotlights can be operated via your standard wall switch. To utilize the dimming function, ensure you have a compatible wall dimmer switch installed in your electrical system.

  • 켜기/끄기: Use your wall switch to turn the spotlights on or off.
  • 디밍 : If connected to a compatible dimmer, adjust the dimmer switch to achieve your desired light intensity.
  • Interchangeable Bulb: The GU10 LED bulbs are interchangeable, allowing for easy replacement if needed.

7. 유지관리

  • 청소: Ensure power is off before cleaning. Wipe the spotlight's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • 전구 교체: To replace a GU10 bulb, ensure power is off. Gently twist the old bulb counter-clockwise to remove it. Insert the new GU10 bulb and twist clockwise until secure.
  • 점검: 손상이나 연결 부위가 헐거워진 흔적이 있는지 정기적으로 점검하십시오. 문제가 발견되면 전원을 차단하고 자격을 갖춘 전기 기술자에게 문의하십시오.

8. 문제 해결

If you encounter issues with your HOFTRONIC Bari spotlights, refer to the following common problems and solutions:

문제가능한 원인해결책
스포트라이트가 켜지지 않습니다.No power supply, loose wiring, faulty bulb.Check circuit breaker. Ensure wiring connections are secure. Replace the GU10 bulb.
예상치 못하게 불빛이 깜빡이거나 어두워집니다.Incompatible dimmer, loose bulb, unstable power.Ensure your dimmer is LED compatible. Tighten the GU10 bulb. Consult an electrician for power supply issues.
Spotlight is hot to the touch.Normal operation (LEDs generate some heat), poor ventilation.Ensure adequate airflow around the fixture. If excessively hot, disconnect power and consult an electrician.

9. 보증 및 지원

HOFTRONIC products are manufactured to high-quality standards. This product comes with a general warranty of up to 10 years, reflecting our commitment to durability and performance. For specific warranty terms, technical support, or service inquiries, please contact HOFTRONIC customer support through your retailer or the official HOFTRONIC web대지.

보증 청구를 위해 구매 증명서를 보관하십시오.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.