HOFTRONIC LED Damp Room Light - Model 552531 Instruction Manual

제품 끝view

This manual provides comprehensive instructions for the HOFTRONIC LED Damp Room Light, a 150 cm, 60W fixture designed for various environments. It features a neutral white light at 4000K and an IP65 rating for water and dust resistance, making it suitable for both indoor and outdoor applications.

The fixture is equipped with two LED fluorescent tubes, delivering a total of 9600 lumens at an efficiency of 160 lumens per watt. It is constructed from durable ABS and polycarbonate materials, offering resistance to chemical vapors and impacts. The patented flicker-free design ensures stable illumination, reducing eye strain.

중요한 안전 정보

경고: Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or repair procedures to prevent electric shock.

• 설치는 모든 지역 및 국가 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
• Do not modify the product in any way not explicitly described in this manual. Unauthorized modifications may void the warranty and pose safety risks.
• 설치 표면이 구조적으로 견고하고 조명기구의 무게를 지탱할 수 있는지 확인하십시오.
• The operating temperature range for this fixture is -20 °C to +40 °C. Do not operate outside this range.
• 포장재는 어린이의 손이 닿지 않는 곳에 보관하십시오.

패키지 내용

패키지에 다음 구성 요소가 모두 포함되어 있는지 확인하세요.

• 1x HOFTRONIC LED Damp 실내 조명기구
• 2x LED Tubes (G13 fitting)
• 1x LED Driver (integrated)
• 장착 나사
• 벽 플러그
• 스테인레스 스틸 장착 브래킷

설치 지침

1. 준비

• Before starting, ensure the power supply to the installation area is completely disconnected at the main circuit breaker.
• Unpack all components and inspect them for any damage.

2. 고정장치 장착

Select a suitable mounting location. The fixture is designed for secure wall or ceiling mounting.

Image: Close-up of the fixture's mounting clips and cable gland.

• Use the provided mounting brackets as a template to mark the drilling points on your chosen surface.
• 표시된 지점에 구멍을 뚫고 벽 플러그를 삽입하십시오.
• Securely attach the mounting brackets to the surface using the provided screws.
• Attach the light fixture to the installed mounting brackets.

3. 전기적 연결

Access the internal wiring compartment by carefully turning the two plastic nipples located on the top ends of the fixture's metal cover. Once turned, the cover can be lifted.

이미지: 내부 view of the fixture with G13 sockets and wiring.

• Connect the main power supply (220-240V AC) to the fixture's wiring terminals. Ensure correct connection of Live (L), Neutral (N), and Earth (PE) wires.
• This fixture supports linking multiple units in series. If connecting multiple lights, use the cable glands on the side of the fixture for secure and waterproof cable entry/exit.

4. Inserting LED Tubes

Carefully insert the two LED tubes into the G13 sockets within the fixture. Ensure they are securely seated and twisted into place.

Image: LED tube with G13 pins, demonstrating flicker-free technology.

5. Closing the Fixture

• Replace the fixture cover, ensuring it is properly aligned and the plastic nipples are turned back to their locked position to maintain the IP65 seal.
• Secure the cover with the stainless steel clamp제공됨.

6. 전원 켜기

• 주 회로 차단기에서 전원을 복구하세요.
• 조명 기구가 제대로 작동하는지 테스트하십시오.

작동 지침

The HOFTRONIC LED Damp Room Light is designed for simple operation:

• 조명은 전원 공급 장치에 연결된 일반 벽 스위치로 제어됩니다.
• Upon activation, the fixture provides instant, flicker-free neutral white light at 4000K.
• 이 조명기는 디밍이 불가능합니다.

Image: Compatibility information for different ballast types.

유지

To ensure optimal performance and longevity of your HOFTRONIC LED Damp Room Light, follow these maintenance guidelines:

• 청소: Disconnect power before cleaning. Clean the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the polycarbonate and ABS materials.
• 튜브 교체: If an LED tube needs replacement, ensure the power is off. Carefully open the fixture, remove the old tube by twisting and pulling, and insert a new compatible G13 LED tube. Ensure the new tube is securely seated before closing the fixture.
• 점검: Periodically check the mounting hardware and electrical connections for security and signs of wear or damage.

문제 해결

If you encounter issues with your HOFTRONIC LED Damp Room Light, refer to the following troubleshooting steps:

• 표시등이 켜지지 않음:
  • Check the power supply at the main circuit breaker to ensure it is not tripped.
  • Verify that all electrical connections within the fixture are secure and correctly wired.
  • Ensure both LED tubes are correctly inserted into their G13 sockets.
  • Confirm that the wall switch is in the 'ON' position.
• 불빛이 깜빡거립니다:
  • This fixture is designed to be flicker-free. If flickering occurs, check for unstable power supply or loose connections.
  • Ensure the fixture is not connected to an incompatible ballast type (e.g., electronic or high-frequency ballasts).
• 밝기 감소:
  • Clean the exterior of the fixture and the LED tubes to remove any dust or debris that may be obstructing light output.
  • Verify that the correct type of LED tubes are installed and are not nearing the end of their lifespan.

If the issue persists after following these steps, please contact customer support or a qualified electrician.

기술 사양

Image: EU Energy Label for Model 552531.

자세한 에너지 정보는 EU 공식 에너지 ​​라벨을 참조하십시오.

View EU Energy Label (Model 552531)

보증 및 지원

This HOFTRONIC LED Damp Room Light (Model 552531) comes with a 5-year warranty, reflecting its superior build quality and expected lifespan of over 50,000 hours.

Image: 5-Year Warranty and 50,000 Hours Lifespan.

For technical support, warranty claims, or further assistance, please contact your authorized HOFTRONIC retailer or visit the official HOFTRONIC web연락처 정보 사이트.