소개
The VOX VFS3 is a dedicated 3-button footswitch designed to enhance the functionality and control of your VOX Mini Go series amplifier. This footswitch allows for hands-free operation of various amplifier features, such as program switching, effect on/off, or looper control, depending on your specific Mini Go amplifier model. This manual provides essential information for the proper setup, operation, and maintenance of your VFS3 footswitch.
안전 정보
- 본 제품을 비나 습기에 노출시키지 마십시오.
- 장치를 열원 근처나 직사광선에 노출시키지 마십시오.
- 장치를 분해하거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
- Use only with compatible VOX Mini Go amp정수기.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
패키지 내용
- VOX VFS3 3-Button Footswitch (with integrated cable)
- 사용 설명서 (본 문서)
제품 끝view
The VFS3 footswitch features three robust buttons, each with an associated LED indicator, and an integrated cable for connection to your amp리퍼.
앞쪽 view of the VOX VFS3 3-Button Footswitch. It features three silver footswitches labeled 1, 2, and 3, each with a corresponding LED indicator above it. The VOX logo is on the left, and 'VFS3' is on the bottom right.
옆 view of the VOX VFS3 footswitch, highlighting its compact and durable metal casing.
뒤쪽에 view of the VOX VFS3 footswitch, displaying the integrated cable that connects to the amplifier. The VOX logo is prominently featured.
설정
- Connect the Footswitch: Locate the footswitch input jack on your VOX Mini Go amplifier. This is typically a 3.5mm (1/8-inch) stereo jack.
- 케이블 삽입: Firmly insert the integrated 3.5mm cable from the VFS3 footswitch into the footswitch input jack on your Mini Go amp리퍼.
- 전원 켜기: Turn on your VOX Mini Go amplifier. The footswitch is powered by the amplifier, so no external power supply is needed for the VFS3.
- 연결 확인: 그만큼 amplifier should recognize the footswitch. Refer to your Mini Go amplifier's manual for specific indications or settings related to footswitch connection.
The VOX VFS3 footswitch connected to a VOX Mini Go amplifier, illustrating the proper connection of the cable to the amp앰프의 입력 잭.
작동 지침
The specific functions controlled by the VFS3 footswitch buttons (1, 2, and 3) are determined by the connected VOX Mini Go amplifier model and its current settings. Please consult the user manual for your specific VOX Mini Go amplifier for detailed information on footswitch assignments and configuration.
Common Functions (May Vary by Amplifier Model):
- Program/Preset Switching: Buttons may be assigned to switch between amplifier programs or presets (e.g., Clean, Overdrive, Distortion).
- 효과 켜기/끄기: Control individual effects (e.g., Reverb, Delay, Chorus) by toggling them on or off.
- 루퍼 제어: For Mini Go models with a built-in looper, the buttons often control looper functions such as:
- 버튼 1: 녹음/재생
- 버튼 2: 멈추다
- 버튼 3: Clear/Undo
- 탭 템포: 일부 amplifiers may allow one of the buttons to be used for tap tempo functionality for time-based effects.
The LEDs above each button indicate the status of the assigned function (e.g., effect on/off, selected program). Refer to your amplifier's manual for the meaning of specific LED colors or states.
유지
- 청소: 부드럽고 마른 천으로 닦으세요. 연마성 세제, 왁스 또는 용제를 사용하지 마세요.
- 저장: When not in use for extended periods, store the footswitch in a clean, dry environment away from extreme temperatures.
- 케이블 관리: Avoid sharp bends or kinks in the integrated cable to prevent damage.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 풋스위치가 반응하지 않습니다 | Cable not fully inserted; Amplifier not powered on; Incorrect amp리파이어 설정. | Ensure the 3.5mm cable is securely connected to the amplifier. Verify the amplifier is powered on. Check your Mini Go amplifier's settings to ensure footswitch control is enabled and configured correctly. |
| LED가 켜지지 않음 | No power from amplifier; Faulty connection. | 확인하다 amplifier is on and the cable is properly connected. The footswitch draws power from the amp리퍼. |
| Buttons perform unexpected functions | Footswitch assignments are incorrect on the amp리퍼. | Refer to your VOX Mini Go amplifier's manual to reconfigure the footswitch button assignments. |
명세서
- 모델: VFS3
- 호환 장치: VOX Mini Go Amp리퍼
- 커넥터 유형: 3.5mm Jack (integrated cable)
- 재료: 금속 섀시
- 치수(길이 x 너비 x 높이): 약 7.9 x 3 x 2.5cm(20.1 x 7.6 x 6.4인치)
- 무게: 약 1.1kg(0.5파운드)
- 전원: Powered by connected amp리퍼
보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your VOX Mini Go amp앰프를 사용하거나 VOX 공식 웹사이트를 방문하세요. web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.