캔디 BCTD H7A1TE-S 내장형 히트펌프 건조기 사용 설명서

1. 서론

This manual provides essential information for the safe and efficient use of your Candy BCTD H7A1TE-S built-in heat pump dryer. Please read these instructions carefully before installation and operation, and keep them for future reference. This appliance is designed to dry up to 7 kg of laundry and features advanced connectivity options.

2. 안전 정보

• 자격을 갖춘 기술자가 기기를 올바르게 설치하고 접지했는지 확인하십시오.
• 어린이가 건조기를 가지고 놀거나 작동시키지 못하게 하십시오.
• Never dry items that have been soiled with flammable substances (e.g., cooking oil, gasoline).
• Clean the lint filter after every cycle to prevent fire hazards and maintain drying efficiency.
• Ensure adequate ventilation in the room where the dryer is installed.
• Do not block the air intake or exhaust vents of the dryer.
• Unplug the appliance before any cleaning or maintenance.
• 직접 기기를 수리하려고 하지 마십시오. 공인 서비스 담당자에게 수리를 요청하십시오.

3. 제품 오버view

The Candy BCTD H7A1TE-S is a built-in heat pump dryer designed for efficiency and user convenience. Key features include a 7 kg capacity, 15+1 drying programs, a digital programmer, and Wi-Fi/Bluetooth connectivity for remote control via the Simply-Fi app.

주요 구성 요소 및 특징:

• Higher Door Opening: Designed for ergonomic loading and unloading, reducing strain.
• EasyCase Water Container: An ergonomically designed compartment located in the door for easy removal and emptying of condensed water. This water can be reused for ironing or watering plants.
• Super Easy Iron Function: Utilizes a smart sensor to maintain optimal humidity and an alternating drum movement to reduce creases, significantly cutting down ironing time.
• 히트 펌프 시스템: Ensures low energy consumption by operating in a closed circuit at lower temperatures, preventing heat dispersion.
• Connectivity (Wi-Fi & BLE): Allows remote control, program selection, and diagnostics via the Candy Simply-Fi app on your smartphone.
• Check-up Program: Available through the Simply-Fi app, this program monitors the condition of filters, door lock, drying system, motor, cooling ventilation, and water collection system, providing alerts and solutions for detected errors.

그림 1: 전면 view of the Candy BCTD H7A1TE-S built-in heat pump dryer, showing the control panel, door, and lower ventilation grille.

Figure 2: The Candy BCTD H7A1TE-S dryer seamlessly integrated into a kitchen cabinet, demonstrating its built-in design.

Figure 3: The dryer door opened, revealing the EasyCase water collection container integrated into the door, designed for easy removal.

그림 4: 클로즈업 view of the control panel, highlighting the program selector dial with various drying options and the 'hOn' connectivity button.

그림 5: 상세 view of the digital display, showing indicators for drying progress, time remaining, and connectivity status.

Figure 6: Interior of the dryer drum, illustrating the design for efficient and gentle drying of laundry.

4. 설정

4.1 풀기

Carefully remove the dryer from its packaging. Check for any transit damage. The package includes the dryer, a 5-liter water drawer (EasyCase), an electrical connection cable, and a drain hose.

4.2 설치

This dryer is designed for built-in installation. Ensure the installation space meets the required dimensions for proper ventilation and operation. Refer to the diagram below for precise measurements.

Figure 7: Installation diagram showing the dimensions for integrating the dryer into a cabinet. Dimensions are in millimeters.

• 건조기를 안정적이고 평평한 표면에 놓으세요.
• Connect the electrical cable to a suitable power outlet.
• Decide whether to use the EasyCase water container or connect the drain hose for direct drainage. If using the drain hose, ensure it is properly secured to a suitable drain.

4.3 초기 사용

Before the first drying cycle, ensure all packaging materials are removed from the drum. It is recommended to run a short cycle with a damp cloth to clean the drum interior.

5. 사용 설명서

5.1 세탁물 넣기

• Ensure laundry is properly spun to remove excess water.
• 건조기에 너무 많은 양의 세탁물을 넣지 마세요. 최대 용량은 7kg입니다.
• 세탁물은 소재 종류와 원하는 건조 정도에 따라 분류하세요.

5.2 프로그램 선택

Turn the program selector dial to choose one of the 15+1 available drying programs. The digital display will show the estimated drying time and program settings. Refer to the appliance's control panel (Figure 4) for program options.

5.3 특수 기능

• 지연된 시작: Press the 'Delayed Start' button to postpone the start of the drying cycle by up to 24 hours. This allows you to take advantage of off-peak electricity tariffs.
• 양모 프로그램: Select the dedicated wool program for delicate woolens. This program controls temperature and uses a special drum movement to prevent damage and knot formation.
• Super Easy Iron: Activate this function to reduce creases and wrinkles in your laundry, making ironing easier and faster.

5.4 Smart Connectivity (Wi-Fi & Bluetooth)

Download the Candy Simply-Fi app on your smartphone to connect to your dryer via Wi-Fi or Bluetooth. The app allows you to:

• Remotely start, pause, or stop drying cycles.
• 추가 프로그램 및 기능을 이용하세요.
• Monitor the drying progress.
• Receive notifications and diagnostic alerts.

6. 유지관리

정기적인 유지관리를 통해 최적의 성능을 보장하고 건조기의 수명을 연장할 수 있습니다.

6.1 린트 필터 청소

The lint filter must be cleaned after every drying cycle. Pull out the filter, remove accumulated lint, and rinse under running water if necessary. Ensure it is completely dry before reinserting.

6.2 Emptying the EasyCase Water Container

If not using direct drainage, the EasyCase water container (Figure 3) must be emptied after each cycle. Pull out the container from the door, empty the water, and reinsert it securely.

6.3 일반 청소

부드러운 수세미로 건조기 외부를 닦아주세요.amp cloth. Do not use abrasive cleaners or solvents. Periodically clean the condenser unit according to the instructions in the full user manual (available via the Simply-Fi app or Candy support web대지).

7. 문제 해결

If you encounter issues with your dryer, consult the following common troubleshooting steps. For more detailed diagnostics, use the Check-up program via the Simply-Fi app.

• 건조기가 시작되지 않음: Ensure the power cable is securely plugged in, the door is fully closed, and a program is selected.
• Laundry not drying properly: Check if the lint filter is clean and the water container is empty. Ensure the dryer is not overloaded and the correct program for the fabric type is selected.
• 비정상적인 소음: 드럼 내부에 이물질이 있는지 확인하십시오. 건조기가 수평인지 확인하십시오.
• 표시되는 오류 코드: Refer to the Simply-Fi app's Check-up program for specific error code interpretations and recommended solutions.

If an error is detected by the Check-up program, the Simply-Fi app will alert you and provide guidance to resolve the issue. For persistent problems, contact customer support.

8. 사양

Figure 8: EU Energy Label for the Candy BCTD H7A1TE-S dryer, indicating an 'F' energy efficiency class, 145 kWh/100 cycles, 67 dB noise level, and 7.0 kg capacity. For more details, scan the QR code or visit eprel.ec.europa.eu/qr/2155440.

9. 보증 및 지원

9.1 제조업체 보증

The Candy BCTD H7A1TE-S dryer comes with a 2년 제조사 보증보증 청구를 위해 구매 증빙 서류를 보관하세요.

9.2 고객 지원

For technical assistance, troubleshooting, or to schedule a service appointment, please contact Candy customer support. You can also utilize the diagnostic features within the Candy Simply-Fi app for immediate assistance.

Additional resources and detailed manuals may be found on the official Candy service web사이트:

• https://manuals.he.services
• https://go.he.services/