1. 중요한 안전 정보
Read and understand all safety warnings and instructions before assembling, operating, or servicing this heater. Failure to follow these instructions may result in fire, explosion, serious injury, or death.
- 야외 사용 전용: This heater is designed for outdoor use only. Do not operate indoors or in enclosed spaces.
- 통풍: Ensure adequate ventilation. Never obstruct the flow of combustion and ventilation air.
- 프로판 가스 전용: Use only propane gas. Do not connect to a remote gas supply.
- 정리 : Maintain minimum clearances from combustible materials: 24 inches (61 cm) from sides and rear, 36 inches (91 cm) from top.
- 바람 상태: In windy weather, move the heater to a sheltered location or indoors to prevent damage or tipping.
- 자동 차단 : The heater is equipped with an automatic shut-off mechanism that activates if the unit tilts over 45 degrees, enhancing safety.
- 화염 차단 보호: Features a flameout protection system that automatically cuts off the gas supply if the flame extinguishes.
- 어린이와 애완동물: 어린이와 반려동물을 난방기에서 안전한 거리에 두십시오.
- 가스 누출: Check all gas connections for leaks using a soap and water solution before each use. Never use a flame to check for leaks.

Figure 1: Flameout protection and safety certifications ensure safe operation.

Figure 2: The heater's unique safety design includes an automatic tilt-over shut-off feature.
2. 제품 오버view
The Pamapic 8560 Pyramid Flame Patio Heater provides 48,000 BTUs of heat, featuring a mesmerizing quartz glass tube flame. It is designed for outdoor use to extend your comfortable outdoor living season.
2.1 주요 특징
- 48,000 BTU heat output for a wide heating range.
- Mesmerizing quartz glass flame tube.
- Reliable pulse ignition system for quick starting.
- Variable heat setting with built-in control valve.
- Automatic tilt-over shut-off and flameout protection.
- Durable, rust-resistant construction.
- Integrated wheels for easy mobility.
- Includes a protective cover.

Figure 3: The Pamapic 8560 Pyramid Flame Patio Heater and its included protective cover.

Figure 4: The heater provides 48,000 BTUs, offering a 15-foot diameter heat range.
3. 설치 및 조립
Assembly typically requires two people and takes approximately 60-90 minutes. Ensure all parts are present before beginning assembly.
3.1 포장 풀기 및 부품 식별
Carefully remove all components from the packaging. Refer to the parts list in your separate assembly guide to identify each piece. Keep all packaging materials until assembly is complete and the heater is tested.
3.2 조립 단계(일반)
- Assemble the base and attach the wheels for mobility.
- Secure the main body panels and internal structure.
- Install the quartz glass tube carefully.
- Attach the top reflector and protective grilles.
- Connect the gas hose and regulator to the burner assembly.
3.3 프로판 탱크 설치
- 프로판 탱크 밸브가 닫혀 있는지 확인하세요.
- Place a standard 20 lb. propane tank (not included) into the designated compartment at the base of the heater.
- 조절기 호스를 프로판 탱크 밸브에 연결하고 손으로 단단히 조이세요.
- Perform a leak test: Apply a soap and water solution to all connections. Bubbles indicate a leak. If a leak is detected, tighten connections or replace faulty parts. Do not operate the heater if a leak is present.

Figure 5: Integrated smooth wheels allow for easy movement of the heater.
4. 사용 설명서
4.1 작업 전 점검
- 모든 연결이 안전하고 정보 유출이 없는지 확인하십시오.
- Ensure the heater is on a level, stable surface.
- Confirm adequate clearances from combustible materials.
- Check that the glass tube is properly seated and undamaged.
4.2 점화 절차
- Open the valve on the propane tank slowly.
- Turn the control knob on the heater to the "PILOT" position.
- Press and hold the control knob down, then press the igniter button repeatedly until the pilot flame lights.
- Continue to hold the control knob down for 15-30 seconds after the pilot lights to allow the thermocouple to heat up. Release the knob; the pilot should remain lit.
- If the pilot does not stay lit, repeat steps 2-4.
- Once the pilot is lit, turn the control knob to the "LOW" position, then slowly rotate it to the desired heat setting (LOW to HIGH). The main burner will ignite.
4.3 히터 끄기
- 조절 손잡이를 "OFF" 위치로 돌리십시오.
- Close the valve on the propane tank completely.
- Allow the heater to cool down completely before moving or covering.

Figure 6: The heater provides warmth for comfortable outdoor gatherings.
5. 유지관리
Regular maintenance ensures the longevity and safe operation of your patio heater.
- 청소: 부드러운 천으로 외부 표면을 청소하세요.amp cloth. Do not use abrasive cleaners or solvents. For the glass tube, use a glass cleaner when the heater is cool.
- 검사: Periodically inspect the gas hose for signs of wear, cuts, or cracks. Check all connections for tightness.
- 저장: When not in use for extended periods, disconnect the propane tank and store the heater in a dry, sheltered location. Use the provided protective cover to shield it from dust and weather elements.
- 버너 유지관리: Keep the burner and pilot assembly clean and free of insects or debris.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 히터가 켜지지 않습니다. | No gas flow; clogged pilot/burner; faulty igniter. | Check propane tank valve; ensure tank is not empty; clean pilot/burner; check igniter electrode gap. |
| Pilot flame will not stay lit. | Thermocouple not heating; gas pressure too low. | Hold control knob longer; check propane tank level; ensure connections are tight. |
| Low flame or yellow flame. | 가스 압력이 낮음; 버너가 부분적으로 막힘. | Check propane tank level; clean burner ports; ensure regulator is functioning correctly. |
| 히터가 예기치 않게 꺼집니다. | Low oxygen sensor activated; tilt switch activated; low gas. | Ensure adequate ventilation; check if heater was tilted; check propane tank level. |
If troubleshooting steps do not resolve the issue, contact Pamapic customer support.
7. 사양
| 상표 | Pamapic |
| 모델 번호 | 8560 |
| 열 출력 | 48,000비티유 |
| 연료 유형 | 프로판 |
| 점화 유형 | 펄스 점화 |
| 치수(전체) | 23"D x 23"W x 88"H (58.4cm D x 58.4cm W x 223.5cm H) |
| 품목 무게 | 61.7파운드(28kg) |
| 특별 기능 | Overheat Protection, Tilt-over Safety Shut-off, Flameout Protection, Variable Heat Setting, Integrated Wheels |
| 한국어: | 196852052745 |

Figure 7: Detailed product dimensions for the Pamapic 8560 Patio Heater.
8. 보증 및 고객 지원
For warranty information, technical assistance, or any questions regarding your Pamapic 8560 Pyramid Flame Patio Heater, please contact Pamapic customer support. Refer to your purchase documentation for specific warranty terms and contact details.
제조사 웹사이트에서 고객 지원 연락처 정보를 찾을 수 있는 경우가 많습니다. web제품을 구매한 소매업체나 사이트를 통해서도 구매 가능합니다.