CONTEC CMS50M Fingertip Pulse Oximeter Instruction Manual

1. 제품 오버view

The CONTEC CMS50M Fingertip Pulse Oximeter is designed for non-invasive spot-check measurement of functional oxygen saturation of arterial hemoglobin (SpO2) and pulse rate (PR). It is suitable for use in sports and aviation, but not intended for medical diagnosis or treatment.

Image: CONTEC CMS50M Pulse Oximeter highlighting its key features.

• 정확하고 빠른 결과: Measures SpO2 (blood oxygen saturation), pulse rate, and displays a bar graph and pulse strength results on a digital LED display.
• Portable & Easy To Use: Lightweight (approximately 50g with batteries). Simply place your finger in the testing chamber for results.
• 편안한 사용감과 긴 배터리 수명: Features a soft silicone fingertip clip suitable for various finger sizes. Offers 20-30 hours of battery life and automatic power-off after 5 seconds of inactivity.
• 명확한 전시: The LED screen is designed for easy viewing and reading. A thin protective film can be removed for clearer display.

2. 포함 사항

Your CONTEC CMS50M Pulse Oximeter package includes the following items:

• CONTEC CMS50M Pulse Oximeter (x1)
• Handy Carry Pouch (x1)
• Long Lanyard (Neck/Wrist Cord) (x1)
• 사용 설명서(x1)

Image: The CONTEC CMS50M Pulse Oximeter and its included accessories.

3. 설정

3.1 배터리 설치

The CONTEC CMS50M Pulse Oximeter requires two AAA batteries (not included in some packages). Ensure correct polarity during installation.

1. 장치 뒷면의 배터리 덮개를 엽니다.
2. Insert two AAA batteries, matching the '+' and '-' indicators inside the compartment.
3. 배터리 덮개를 단단히 닫으세요.

Image: Correct battery installation for the pulse oximeter.

3.2 보호 필름 제거

A thin protective film is applied to the screen for shipping. For optimal display clarity, gently peel off this film before first use.

3.3 랜야드 부착하기

To attach the lanyard, thread the thin loop end through the lanyard loop hole on the device. Then, pass the thicker part of the lanyard through the thin loop and pull to secure.

Image: Instructions for attaching the neck/wrist cord.

4. 사용 설명서

Follow these steps to take a measurement with your CONTEC CMS50M Pulse Oximeter:

1. Ensure your hands are warm and free of nail polish for accurate readings.
2. 펄스산소측정기의 클립을 엽니다.
3. Insert one finger fully into the rubber opening of the oximeter, ensuring it rests flat on the sensor.
4. Press the power button on the top of the device.
5. Keep your hand still and wait a few seconds for the device to display your SpO2 and Pulse Rate readings. Movement can cause inaccurate results.
6. Once readings are stable, you can remove your finger. The device will automatically power off after 5 seconds of inactivity.

Image: Step-by-step visual instructions for using the pulse oximeter.

4.1 교육용 비디오

For a visual guide on how to use the CONTEC CMS50M Pulse Oximeter, please watch the following video:

Video: Official CONTEC guide on how to use the CMS50M pulse oximeter, demonstrating battery installation and measurement steps.

5. 유지관리

맥박산소측정기의 수명과 정확성을 보장하려면 다음 유지 관리 지침을 따르십시오.

• 청소: 부드러운 천으로 기기를 닦습니다 dampened with alcohol or a mild disinfectant. Do not immerse the device in liquid.
• 저장: Store the oximeter in a cool, dry place, away from direct sunlight and extreme temperatures. If not in use for an extended period, remove the batteries.
• 배터리 교체: 디스플레이에 배터리 부족 표시가 나타나면 배터리를 교체하세요.
• 점검: 장치에 손상이나 마모 흔적이 있는지 정기적으로 확인하십시오.

6. 문제 해결

If you encounter issues with your pulse oximeter, consider the following:

• 화면이 표시되지 않거나 기기가 켜지지 않음: Check if batteries are installed correctly with the right polarity. Replace batteries if they are low or depleted.
• 부정확한 판독: Ensure your finger is fully inserted into the device and remains still during measurement. Avoid nail polish, cold fingers, or excessive movement.
• "Finger Out" or Error Message: Reinsert your finger properly. If the issue persists, ensure the sensor area is clean.
• 루즈핏: The device is designed to fit a range of finger sizes. Ensure your finger is positioned centrally.

이러한 문제 해결 단계를 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하십시오.

7. 사양

8. 중요한 안전 정보

경고: Pulse oximeters provide an estimated oxygen saturation level. Research and safety communications indicate that certain physical traits, such as darker skin pigmentation and melanin, may cause the estimated oxygen level to appear higher than the actual value. Users are strongly recommended to establish a baseline value when healthy and at rest. It is advised to consult a licensed healthcare provider or professional on how to interpret user readings based on individual physical traits or characteristics.

This device is intended for sports and aviation use only and is not a medical device. It is not intended for continuous monitoring.

9. 보증 및 지원

For warranty information or technical support, please refer to the documentation included with your product or visit the official CONTEC web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.